Product Catalog

Gearmotors Parallel Shaft - SUB-FHP - AC Gearmotors

12-100 In-Lbs. Output Torque

Gearmotors AC / DC Controls Accessories / Kits Options X-Ref / Index Tech Information Warnings/Cautions

Features: • Permanent split capacitor design rated for 115 VAC 60 HZ input • Precision machined in-line steel gears • First stage steel helical gear followed by spur-type gears • Lubrication is permanent semi-fluid grease, reducing possibility of leakage • Output shafts have needle bearings for high load capacities • Shafts are hardened steel • Optional conduit box and PZ gearmotor mounting bracket available

Application Notes: • These gearmotors are designed for mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail • The motor’s stall torque could exceed recommended full load torques causing gearhead damage, especially in ratios of 60:1 and higher. Provisions to limit the torque are recommended • The torque values listed are the recommended full load torque values • Overhung load capacities shown are at center of output shaft • All PZ Series gearmotors are supplied with continuous duty “run” capacitor

Mods / Factory

• Optional conduit box available, see page 356 • For additional information, see Bulletin 1830 • Bodine/Bison/Dayton direct interchange

Bison is believed to be the trademark or trade name of Bison Gear & Engineering Corporation. Bodine is believed to be the trademark or trade name of Bodine Electric Corporation. Dayton is a trademark or trade name of Dayton Electric Manufacturing. All Rights Reserved.

346