WCA September 2014

Industry news

65 years of service from Eder

the ultrasonic USP twin, with two workstations which have been developed to work in a range between 0.05 to 8mm diameter. This can be operated by one person while at the same time doubling output. Also on display will be the HGM-21 for sizing and polishing the cylindrical bearing of a mid to large quantity of ND/PCD dies. This is an efficient and versatile wire-type calibration machine with a large work range of between 0.05mm and 10mm diameter. Eder will be joined on the Austrian pavilion by the AWCMA/VOEDKM association, Ebner Industrieofenbau (W1D45), Pengg (W1D49), MAG (W1C30), Mali (W1D51), Medek & Schörner (W1C32), Rosendahl Nextrom (W1D43), Voestalpine Austria Draht (W1D47) and WKO/Austria Advantage (W1C34). Eder Engineering GmbH – Austria Website : www.eder-eng.com

FOR more than 65 years, Eder Engineering has offered efficient semi-automatic and fully automatic machines for both reconditioning and the production of ultrahard precision drawing die tools made from tungsten carbide, natural diamond and synthetic PCD. This is in addition to precision die tools and technical assistance for all advanced Eder equipment for the up-to-date processing of die tools. Eder has been continuously active in China since 1978 and will again be taking part in wire China from 24 th to 27 th September on stand W1C36. Some highlights of processing dies will include the ETC-1/HF, tungsten carbide die grinding and polishing equipment. This has a large work range from 0.1 to 20mm diameter. Particularly suitable for refurbishing of PCD on multiwire drawing machines is

❍ The USP twin which Eder will present in China

27

www.read-wca.com

Wire & Cable ASIA – September/October 2014