Microsoft Word - licence, brevet, dessin industriel-2018-en.

Cette publication interactive est créée avec FlippingBook, service pour la diffusion des fichiers PDF en ligne. Pas besoin de télécharger, ni attendre. Ouvrez et commencez à lire immédiatement!

Bureau and associations 

Bolduc products are manufactured to meet the following standards : 

‐ Canadian Standards Association  CSA‐A 231.1 (Precast concrete paving slab)  CSA‐A 231.2 (Precast concrete paver) 

‐ Quebec standards bureau ‐ BNQ  NQ 2624 – 120 Precast concrete paver  NQ 2624 – 210 Precast concrete curbs 

Bolduc is a member of :

Most of Bolduc’s products are registred or trade mark. 

Trade mark  TM  Registered  ®  Acadia ®  Appalachian®  Château®  Citadin®  Bloc patio  Grenart™  Laurentian™ Avenue®  Slope block II™ 

Adirondack®  Appialock®  Slope block I™ 

Champlain®

Classic™  Déco™  Écono™ 

Iris™  Linia™ Luna®

Lotus™ 

Manoir™ 

Manoir modulaire™  New England classic™ 

Mesa® Opus® 

Patinart™  Prestige™  Romance® 

Premium™  Richelieu™ 

Supra Acadia® 

Sutton™

Tri‐Appia™

Via Appia®

Avenue ® UrbanPaver

Beautyandharmony! These pavers blend inperfectlywith surroun- ding architecture andurban landscaping. Features • Speciallydesigned for landscapingparks, walkways,driveways,streets,parking areas, etc. •Wide selectionof shimmering colors • Smoothpremium ,Grenart premium or polishedpremium finishes available •Many patterns available •Versatilemanual ormechanical installation • 3 15/16 inches (10 cm) thick • Rugged,beveled surface for a non-skid surface •Withstands freezing and thawing cycles, abrasion and compressive stresses • 6 colors contributing toLEEDprogram

Avenue ® UrbanPaver NOMINAL DIMENSIONS (in / cm) GEOMETRIC CHARACTERISTICS

TECHNICAL SPEC SHEET

Pavers contributing to LEED program Leed-certified solar reflectance index (Granite Gray, Light Gray, Opal White, Ivory, Light Beige, Sahara Beige)

COLORS

4

2

5

1

Granite Gray

Light Gray

11

12

13

 7*

3

14

 6*

8

10

1. Whole Pattern

Silver Gray

Smoke Gray

3 15/16 x 19 5/8 x 19 5/8 in (10 x 50 x 50 cm)

9

5. 3 15/16 x 11 13/16 x 23 5/8 in (10 x 30 x 60 cm) 6. 3 15/16 x 7 7/8 x 23 5/8 in* (10 x 20 x 60 cm) 7. 3 15/16 x 3 15/16 x 23 5/8 in* (10 X 10 X 60 cm) 8. 3 15/16 x 5 7/8 x 17 3/4 in (10 x 15 x 45 cm)

2. 1/2 Pattern

3 15/16 x 19 5/8 x 19 5/8 in (10 x 50 x 50 cm)

9. 3 15/16 x 11 13/16 x 17 3/4 in (10 x 30 x 45 cm) 10. 3 15/16 x 3 15/16 x 17 3/4 in (10 x 10 x 45 cm) 11. 3 15/16 x 11 13/16 x 11 13/16 in (10 x 30 x 30 cm)

12. 3 15/16 x 5 7/8 x 11 13/16 in (10 x 15 x 30 cm) 13. 3 15/16 x 5 7/8 x 5 7/8 in (10 x 15 x 15 cm) 14. 3 15/16 x 3 15/16 x 11 13/16 in (10 x 10 x 30 cm)

3. 1/4 Pattern

3 15/16 x 19 5/8 x 19 5/8 in (10 x 50 x 50 cm) 4. 3 15/16 x 23 5/8 x 23 5/8 in (10 x 60 x 60 cm)

Opal White

Anthracite

* These pavers must not be used for roadways

DIMENSIONAL TOLERANCES †

Light Beige

Ivory

The permitted dimensional tolerances prescribed in the CSA A231.2 standard are the following: Length: -1/32 in to 5/64 in (-1 mm to +2 mm) Width: -1/32 in to 5/64 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)+

WEIGHT OF PAVERS: 48.1 lb/sq. ft. (235 kg/m 2 )

Burned Beige

Sahara Beige

PHYSICAL CHARACTERISTICS †

COMPRESSIVE STRENGTH** 7250 Psi (50 Mpa)

RESISTANCE TO FREEZE-THAW CYCLES

WATER

IN A SALINE SOLUTION** Maximum loss of initial weight

ABSORPTION

5% maximum

in saline solution (NaCl 3%): • 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

Sandhill Beige

Salmon

SPECIFICATION CLAUSE

SPEC. NOTE: Include the following article in Part 2 - Products of section 32 14 13 - Precast Concrete Pavers. It prescribes the choice of BOLDUC Urban pavers and slabs for landscaping purposes. It should describe the geometric and physical characteristics and indicate the paver selected, its dimensions, color and finish. The consultant can choose a specific product by referring to BOLDUC’S document.

Clay Red

Red

PART 2 - PRODUCTS

.1 Precast concrete urban pavers: to CSA A231.2 and the following prescriptions. 2.1 Precast Concrete Urban Pavers

.2 Avenue pavers supplied by BOLDUC. .1 Thickness: 3 15/16 in (10 cm)

.2 Nominal Dimensions:___________________________ .3 Color:______________________________________ .4 Texture:_ ___________________________________ (Smooth premium , Grenart premium or buffed premium )

Burgundy

Caledonia Pink

INSTALLATION

Contact the technical service or go to Bolduc’s website at www.bolduc.ca to obtain the model specifications, installation guide or any other technical information.

Brown

Bistre

NOTE: • Other colors available, including yellow and blue. • We recommand that you use actual samples to make your final choice.

† Copies of lab tests are available upon request. ** Tests performed as per CSA A231.2

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

Avenue ® Autoblocking UrbanPaver

Beautyandstability! These pavers blend inperfectlywith surrounding architecture andurban landscaping. Features

• Speciallydesigned for streets,intersections, crosswalks,parking lots,storage areas,parks, etc. •Wide selectionof shimmering colors • Smoothpremium ,Grenart premium or polishedpremium finishes available • 3 15/16 inches (10 cm) thick •Horizontal RL autoblocking system provides surface stability (systemwith grooves) •Horizontal andverticalHVautoblocking systemprovides optimal surface stability (systemwithmortise / tenon) •Horizontal RL autoblocking system provides surface stability (systemwith grooves) • Provides greater flexual strength •Distributes loads over surroundingpavers • Eliminates ruttingproblems • Rugged,beveled surface for a non-skid surface •Withstands freezing and thawing cycles, abrasion and compressive stresses •“Runner”and“Herringbone”patterns • 6 colors contributing toLEEDprogram

Avenue Autoblocking RL (System with grooves)

Avenue Autoblocking HV (System with mortise / tenon)

Avenue ® Autoblocking UrbanPaver

TECHNICAL SPEC SHEET

Pavers contributing to LEED program Leed-certified solar reflectance index (Granite Gray, Light Gray, Opal White, Ivory, Light Beige, Sahara Beige)

COLORS

NOMINAL DIMENSIONS (in / cm) GEOMETRIC CHARACTERISTICS

Granite Gray

Light Gray

3 15/16 x 5 7/8 x 11 13/16 in (10 x 15 x 30 cm) Avenue Autoblocking RL (System with grooves)

3 15/16 x 11 13/16 x 11 13/16 in (10 x 15 x 30 cm)

3 15/16 x 5 7/8 x 11 13/16 in (10 x 15 x 30 cm) Avenue Autoblocking HV (System with mortise / tenon)

DIMENSIONAL TOLERANCES †

Silver Gray

Smoke Gray

The permitted dimensional tolerances prescribed in the CSA A231.2 standard are the following: Length: -1/32 po. à + 5/64 in (-1 mm to +2 mm) Width: -1/32 po. à + 5/64 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)

Opal White

Anthracite

WEIGHT OF PAVERS: 48.1 lb/sq. ft. (235 kg/m 2 )

PHYSICAL CHARACTERISTICS †

COMPRESSIVE STRENGTH** 7250 Psi (50 Mpa)

RESISTANCE TO FREEZE-THAW CYCLES

WATER

IN A SALINE SOLUTION** Maximum loss of initial weight

ABSORPTION

5% maximum

Light Beige

Ivory

in saline solution (NaCl 3%): • 0.74oz / pi 2 (225 g/m 2 ) after 28 cycles • 1.64oz / pi 2 (500 g/m 2 ) after 49 cycles

SPECIFICATION CLAUSE

SPEC. NOTE: Include the following article in part 2-Products of section 32 14 13-Precast Concrete Pavers. It prescribes the choice for BOLDUC autoblocking Urban Pavers for landscaping purposes. It should describe the geometric and physical characteristics and indicate the paver selected, its dimensions, color and finish. The consultant can choose a specific product by referring to BOLDUC’S document.

Burned Beige

Sahara Beige

PART 2 - PRODUCTS

2.1 Precast Concrete Avenue Autoblocking Pavers

Sandhill Beige

Salmon

.1 Precast concrete autoblocking pavers: to CSA A231.2 and the following prescriptions. .2 Avenue Autoblocking pavers supplied by BOLDUC. 1. Thickness: 3 15/16 in (10 cm)

2. Nomimal Dimension:_ __________________________ 3. Color:______________________________________ 4. Texture:_ ___________________________________ finish (Smooth premium , Grenart premium or polished premium )

Clay Red

Red

INSTALLATION

Contact the technical service or go to Bolduc’s website at www.bolduc.ca to obtain the model specifications, installation guide or any other technical information.

Burgundy

Caledonia Pink

Brown

Bistre

† Copies of lab tests are available upon request. ** Tests performed as per CSA A231.2

NOTE: We recommand that you use actual samples to make your final choice.

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

Avenue ® Permeable UrbanPaver

Perfectharmony! This beautiful paver blends inperfectly with surrounding architecture andurban landscapes. Features • 5/16”(8mm) joint Surface openingpercentage: 8% • Controls and/or reduceswater runoff • Improveswater runoff volumes •Meets surfacewatermanagement best practices •Drains quickly • Flexibility: canbe installedmanually or mechanically • 3 15/16 ”(10 cm) thick • Smoothpremium ,Grenart premium or polishedpremium finishes available • Rugged,beveled surface for a non-skid surface

Avenue ® Permeable UrbanPaver

TECHNICAL SPEC SHEET

Pavers contributing to LEED program Leed-certified solar reflectance index (Granite Gray, Light Gray, Opal White, Ivory, Light Beige, Sahara Beige)

COLORS

NOMINAL DIMENSIONS (in / cm) GEOMETRIC CHARACTERISTICS

Granite Gray

Light Gray

3 15/16 x 5 7/8 x 11 13/16 in (100 x 150 x 300 mm)

DIMENSIONAL TOLERANCES †

Silver Gray

Smoke Gray

The permitted dimensional tolerances prescribed in the CSA A231.2 standard are the following: Length: -1/32 po. à + 5/64 in (-1 mm to +2 mm) Width: -1/32 po. à + 5/64 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)

Opal White

Anthracite

WEIGHT OF PAVERS: 48.1 lb/sq. ft. (235 kg/m 2 )

PHYSICAL CHARACTERISTICS †

COMPRESSIVE STRENGTH** 7250 Psi (50 Mpa)

RESISTANCE TO FREEZE-THAW CYCLES

WATER

IN A SALINE SOLUTION** Maximum loss of initial weight

ABSORPTION

5% maximum

Light Beige

Ivory

in saline solution (NaCl 3%): • 0.74oz / pi 2 (225 g/m 2 ) after 28 cycles • 1.64oz / pi 2 (500 g/m 2 ) after 49 cycles

SPECIFICATION CLAUSE

SPEC. NOTE: Include the following article in part 2-Products of section 32 14 13-Precast Concrete Pavers. It prescribes the choice for BOLDUC Permeable Urban Pavers for landscaping purposes. It should describe the geometric and physical characteristics and indicate the paver selected, its dimensions, color and finish. The consultant can choose a specific product by referring to BOLDUC’S document.

Burned Beige

Sahara Beige

PART 2 - PRODUCTS

2.1 Precast Concrete Permeable Urban Pavers

Sandhill Beige

Salmon

.1 Precast concrete pavers complying with CSA A231.2 and the following prescriptions. .2 Avenue Permeable Pavers supplied by BOLDUC. 1. Thickness: 3 15/16 in (10 cm) 2. Nomimal Dimension: 3 15/16 x 5 7/8 x 11 13/16 in (100 x 150 x 300 mm) 3. Color:______________________________________ 4. Texture:_ ___________________________________ finish (Smooth premium , Grenart premium or polished premium )

Clay Red

Red

INSTALLATION

Contact the technical service or go to Bolduc’s website at www.bolduc.ca to obtain the model specifications, installation guide or any other technical information.

Burgundy

Caledonia Pink

Brown

Bistre

† Copies of lab tests are available upon request. ** Tests performed as per CSA A231.2

NOTE: We recommand that you use actual samples to make your final choice.

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358, 2e rue du Parc-Industriel Sainte-Marie (Québec) Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

PermeablePavers Opus,ViaAppia 60 andViaAppia 80pavers ProductDescription: The installationof Bolduc’spermeablepaversover anopengradedcrushedstonebase, that acts likea retentionreservoir,creates a temporary storage systemfor surfacewater runoff.This systemcanreplace traditional impermeablepaving inorder tocontrol and/ or reduce surfacewater runoff,minimize theneed for temporarywater retentionstruc- tures,and improve thequalityof surfacewater runoff.Rainwater recharges thewater table,and fewerpollutants andsediments enterwaterways,helping theenvironment. TheBolducpermeablepaversmeetsCSAA231.2physical andmechanical standards. USEPA(UnitedStatesEnvironmental ProtectionAgency) recognizespermeablepaving asoneof thebestways tomanage surfacewater.

Bolduc paver models that can be used as permeable paver or as regular residential paver. Opuspaver ViaAppia60

ViaAppia80 module1

Thickness Dimensions

2 3/8 in.

2 3/8 in.

3 1/8 in.

3 15/16 x7 7/8 in.

2 3/8 x3 1/8 to7x 4 3/4 to9 1/2 in.

3 1/8 x3 1/8 to

4 3/4 x4 3/4 to9 1/2 in.

PiecesCount per ft 2

4,1

4,1

5,1

Surfaceopening percentage CN*coefficient

6,8%

4,3%

4,5%

65

65

65

*CoefficientfortheSCSmethod.Thisapproximatevalueisbasedonaconservativelong-terminfiltration ratethroughthepavementof 1inch/hour..LowerCnvaluescanbeusedindesignif amaintenancepro- gramthatincludescleaning/replacingof permeablejointfillingmaterialisexpectedtobestrictlyfollowed duringtheexpectedlifeof thepavement. OpusPaver

ViaAppia60Paver

ViaAppia80Paver

PermeablePavers Opus,ViaAppia60andViaAppia80pavers

TECHNICAL SPEC SHEET

AnExampleof PermeablePavers The preferred option is to let the water that gets stored in the crushed stone reservoir infiltrate thenative soil. This canbeaccomplish if the fol- lowingconditions areachieved: •Native soil (sub grade) below the reservoir must have a water permeabilitygreater than0.5 inches/hr. •Thebaseof thecrushedstone reservoirmust be flat. •The crushed stone storage systemmust be at least 2 feet above the water table and more than 100 feet from a drinking water supply (well). •The paved surface of the storage systemmust have a slope of at least 1%but nomore than5%. In some cases water can’t or must not be absorbed by the existing soil andmust instead be redirected toward amore conventional wastewater collectionnetwork.Insuchcases,thesystemactsasaretentionstructure, designed toreducepeak flows in the surfacewater collectionnetwork. PermeablePaverDesign The reasons for using a permeable paving system must be clearly established. It must be determined if the system allows for complete or partial water infiltration into native soil.When designing a permeable paving system, it is common practice to include a secondary surface water control system to manage surplus water not dealt with by the permeable paving system when precipitation exceeds levels antici- pated during the design process. Once the basic parameters have been established, the permeable paving system is then designed, taking into account site conditions such as precipitation data (for recurrence and intensity) and affluent runoff surfaces other than the paving surface itself (if applicable), as well as the runoff characteristics of these sur- faces. These datas allow the designer to establish the flow and volume of water that will percolate through the permeable joints between the pavers and be collected in the crushed stone reservoir beneath the pavement. Characteristics that are representative of the system’s long-term absorption capacities must be used in the design stage. For applications where a periodical joints maintenance programwill apply (rehabilitation of original permeability of joint material) and where permeabilityof natural soil ishigh,infiltrationratesof 5 inches/hourand more canbeused indesign.Otherwise,the recommendedconservative long-terminfiltrationrate for thedesignstage is 1 to3 inches/hour.

Typical crosssectionof permeable pavement structureforresidentialapplications.

Surface runoff is directed toward the crushed stone reservoir via open- ings (joints) in the paving system.AASHTOno.9 crushed stone is used as a bed face for the pavers and to fill the joints between them.The bed

face is generally1 to2 inches thick. AASHTOnumber9grading Nominal size

Pourcentpassing%

(Sieveswithsquareopenings) 3/8 in.

100

No.4 No.8

85 to100 10 to40

No.16 No.50

0 to10

0 to5 For pedestrian and low vehicular application like residential driveways, sidewalks, patios, the stone reservoir is generally made up of AASHTO no.57 crushed stonewith a voidpercentage of at least 32%—preferably 40%—to allowwater to be stored inside.The thickness of the reservoir normally varies from 6 to 12 inches depending on anticipated traffic loads and surfacewater runoff.Whenwater running over the pavement is to be absorbed by the native soil, a permeable geotextile membrane is usually placed below the stone reservoir. When the water collected cannot be absorbed by the existing soil, an impermeable membrane is installedat thebottomof theopengradedbase. For applicationwheremediumtohighvehicular circulation is expected, a sub base is generally added to the pavement structure.The sub base is generallymadeupof opengradedAASHTOno.2 crushed stonewitha voidpercentageof 32 to40%.

Formore information,contact:

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

www.bolduc.us info@bolduc.us

1358–2nd Street, Industrial Park, Sainte-Marie, Beauce, Québec, Canada G6E 1G8

Printed in Canada

PaversandSlabscontributing toLEEDprogram Avenue,CitadinandPrestige

Creatingagreenerworld LEED-certifiedpavers and slabs that reduce your environmental footprint. Features • LEED-certified solar reflectance index

PaversandSlabscontributing toLEEDprogram Avenue,CitadinandPrestige

TECHNICAL SPEC SHEET

Paver and Slab contributing to LEED program Contributing to LEED program solar reflectance index

COLORS

Characteristics of pavers and slabs contributing to the LEED program

AvenuePaver

Granite Gray

Light Gray

Colors

Color code

Emissivity ASTM E 408

Solar Reflectance ASTM E 903

IRS

(Solar Reflectance Index) ASTM E 1980

Smooth premium finish

Opal White

Ivory

Ivory

R-01 R-03 R-05 R-11 R-34 G-01 G-03 G-05 G-11 G-10 G-34

0.908 0.899 0.912 0.908 0.905

0.41

46.8 38.1 54.8 33.2 41.2

Light Beige Opal White Granite Gray Sahara Beige

0.346

0.47

0.305 0.368

Light Beige

Sahara Beige

CitadinModularPaver

Grenart and polished premium finish

* The Citadin modular paver is not available in a Premium finish.

Ivory

0.902

0.529 0.398 0.504 0.384 0.307 0.459

62.4

Light Beige Opal White Granite Gray Light Gray Sahara Beige

0.9

45

0.894 0.895 0.899 0.909

58.8 42.9 33 53.3

Granite Gray

Citadin80Paver

Granite Gray

CitadinSlab

Granite Gray

Prestige80Paver Ivory

Granite Gray

Light Gray

PrestigeSlab

Manufacturing location: Ste-Marie LEED colors can be applied to various types of pavers by special order.

Gris Granite

Light Gray

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Ivory

Printed in Canada

TriAppia TM UrbanPaver

Beautyandflexibility! This European-styledpaver and the choice of colorswill give an refined look tourban spaces. Characteristics • Speciallydesigned for streets,intersections, crosswalks,parking lots,storage areas,parks, etc. • Choice of 4 classic colors • Extremely quick to install • 4 inches (10 cm) thick • Comes in three sizes,considerably reducing the need for cutting •Withstand freezing and thawing cycles, abrasion and compressive stresses •“Runner”Patterns

TriAppia TM UrbanPaver

TECHNICAL SPEC SHEET

COLORS

NOMINAL DIMENSIONS (in. / cm) GEOMETRIC CHARACTERISTICS

Limestone Gray

4 x 4 15/16 x 7 7/8 in. 10 x 12,5 x 20 cm

4 x 4 15/16 x 9 7/8 in. 10 x 12,5 x 25 cm

4 x 4 15/16 x 11 13/16 in. 10 x 12,5 x 30 cm

DIMENSIONAL TOLERANCES †

The permitted dimensional tolerances prescribed by in the CSA A231.2 standard are the following: Lenght: -1/32 in. to + 5/64 in. (-1 mm to +2 mm) Width: -1/32 in. to + 5/64 in. (-1 mm to +2 mm) Height: ±1/8 in. (±3 mm)

Sandstone Beige

WEIGHT OF PAVERS: 48,1 lb/sq. ft. (235 kg/m 2 )

PHYSICAL CHARACTERISTICS †

COMPRESSIVE STRENGTH** 7250 Psi (50 Mpa)

DURABILITY TO FREEZE-THAW CYCLES WITH UTILISATION IN SALINE SOLUTION**

WATER

ABSORPTION

Maximum loss of initial weight

5% maximum

in saline solution (NaCl 3%): • 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

Terracotta Brown

SPECIFICATION Clause

Part 2 - Products SPEC. NOTE : Include the following article in Part 2 - Products of section 02751 - Prefabricated Concrete Pavers. It permits the specification of Bolduc urban pavers as a surface covering and lists the requirements for geometric and physical characteristics. It also indicates the dimensions and color of the selected interlocking paver. 2.1 Concrete paver 1. Concrete paver compliant with CSA-A 231.2 standard and the following requirements : 2. TriAppia TM Paver supplied by Bolduc : 1. Thickness : 4 in.(10 cm) 2. Nominal dimensions : 4 x 4 15/16 x 7 7/8 , 9 7/8 , 11 13/16 in. (10 x 12,5 x 20, 25, 30 cm) 3. Color : ___________________________

Garnet Red

Note: We recommand that you use actual samples to make your final choice.

INSTALLATION

Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

† Copies of lab tests are available upon request. ** Tests performed as per CSA A231.2

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park, Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

Appialock ™ InterlockingUrbanPaver

Beautyandsimplicity! The aged look and color scheme of these paverswill give urban environments Europeanflair. Characteristics • Speciallydesigned for streets,intersections, crosswalks,parking lots,storage areas,parks, etc. • Choice of four attractive colors • Extremely quick to install • 4 inches (10 cm) thick •Autoblocking systemprovides optimal surface stability • Provide greater flexural strength •Distribute loads over surroundingpavers • Eliminate ruttingproblems •Withstand freezing and thawing cycles, abrasion and compressive stresses •“Runner”Patterns

Appialock ™ InterlockingUrbanPaver

TECHNICAL SPEC SHEET

COLORS

NOMINAL DIMENSIONS (in. / cm) GEOMETRIC CHARACTERISTICS

4 x 5 1/2 x 8 5/8 in. (10 x 14 x 22 cm) Edge paver (one straight side) and half-paver also available

Limestone Gray

DIMENSIONAL TOLERANCES

The following dimensional tolerances are permitted under the CSA A231.2 standard : Lenght : ± 1/16 in. (-1 mm to +2 mm) Width: ± 1/16 in. (-1 mm to +2 mm) height : ± 1/8 in.(± 3 mm)

Sandstone Beige

PAVER WEIGHT : 48.1 lbs/sq. ft. (235 kg/m 2 )

PHYSICAL CHARACTERISTICS †

COMPRESSIVE STRENGTH** 7250 Psi (50 Mpa)

DURABILITY TO FREEZE-THAW CYCLES WITH UTILISATION OF DE-ICING SALTS**

WATER

ABSORPTION

Maximum loss of initial weight

5% maximum

in saline solution (NaCl 3%): • 0.74oz / ft 2 (225 g/m 2 ) after 28 cycles • 1.64oz / ft 2 (500 g/m 2 ) after 49 cycles

Terracotta Brown

SPECIFICATION Clause

SPEC. NOTE: Include the following article in Part 2 - Products of section 02751 - Prefabricated Concrete Pavers. It permits the specification of Bolduc interlocking pavers as a surface covering and lists the requirements for geometric and physical characteristics. It also indicates the dimensions and color of the selected interlocking paver.

PART 2 - PRODUCTS

Garnet Red

2.1 Concrete interlocking paver

.1 Concrete interlocking paver compliant with CSA-A 231.2 standard and the following requirements : .2 Appialock™ Paver supplied by Bolduc : 1. Thickness : 4 in.(10 cm) 2. Nominal dimensions : 4 x 5 1/2 x 8 5/8 in.(10 x 14 x 22 cm) 3. Colors :_ ___________________________________

NOTE: We recommand that you use actual samples to make your final choice.

INSTALLATION

Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

† Copies of laboratory tests are available upon request. ** Tests according to CSA A231-2

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park, Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

Prestige TM PaverandSlab

Classicandelegant With theirwell-definedflat surfaces, these square pavers and slabs fit withwell contemporary,refineddecors. Features • 3 1/8 inch (8 cm) thickpavers • 2 1/2 inch (6.5 cm) thick slabs • Grenart finish • Choice of solid and contrasting colors; 3paver colors and4 slab colors •Different sizes for a greater variety of patterns

Prestige TM PaverandSlab

TECHNICAL SPEC SHEET

Paver and Slab contributing to LEED program Contributing to LEED program solar reflectance index (Granite Gray, Light Gray and Ivory)

PAVER COLORS

NOMINAL DIMENSIONS HEIGHT XWIDTH X LENGTH

NUMBER OF PIECES

in

cm

/ft 2

/m 2

Pavers 1. 3 1/8 x7 7/8 x15 3/4 2. 3 1/8 x15 3/4 x15 3/4 3. 3 1/8 x15 3/4 x23 5/8 Slabs 4. 2 1/2 x7 7/8 x15 3/4 5. 2 1/2 x15 3/4 x15 3/4 6. 2 1/2 x15 3/4 x23 5/8 7. 2 1/2 x23 5/8 x23 5/8

8x20x40 8x40x40 8x40x60 6,5x20x40 6,5x40x40 6,5x40x60 6,5x60x60

1.2 12.5 0.6 6.3 0.4 4.2 1.2 12.5 0.6 6.3 0.4 4.2 0.3 2.8

Granite Gray

Light Gray

1

2

3

4

5

6

7

DIMENSIONAL TOLERANCES †

Anthracite

WEIGHT: PAVERS: 37.26 lb/sq. ft. (182 kg/m 2 ) SLABS: 30.5 lbs/sq. ft. (149 kg/m 2 ) The permitted dimensional tolerances prescribed in the CSA A231.2, CSA A231.a1 standards are the following: Length: -1/32 in to +5/64 in (-1 mm to +2 mm) Width: -1/32 in to +5/64 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)

SLAB COLORS

PHYSICAL CHARACTERISTICS † (PAVERS)

COMPRESSIVE STRENGTH** 7250 Psi (50 Mpa)

RESISTANCE TO FREEZE-THAW CYCLES

WATER

IN A SALINE SOLUTION** Maximum loss of initial weight

ABSORPTION

5% maximum

in saline solution (NaCl 3%): • 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

Granite Gray

Light Gray

PHYSICAL CHARACTERISTICS † (SLABS)

FLEXURAL (TRANSVERSE) RESISTANCE TO FREEZE-THAW CYCLES

WATER

STRENGTH*

IN A SALINE SOLUTION* Maximum loss of initial weight

ABSORPTION

653 Psi (4,5 Mpa)

6% maximum

in saline solution (NaCl 3%): • 1.64oz / pi2 (500 g/m2) after 28 cycles • 3.93oz / pi2 (1200 g/m2) after 49 cycles

Anthracite

Ivory

NOTE: We recommend that you use actual samples to make your final choice. When installing Granite Gray, Light Gray, Anthracite or Ivory pavers and slabs, we recommend covering them with a membrane to protect from dirt and grime. Walk on the protective membrane during installation to prevent staining or spotting. We also recommend using a Teflon-coated vibrating plate on pavers or slabs during installation to protect stone surfaces. Once Prestige pavers or slabs have been installed and properly cleaned, we recommend applying a sealant for easier maintenance.

SPECIFICATION CLAUSE

SPEC. NOTE: Include the following article in Part 2 - Products of section 32 14 13 - Precast Concrete Pavers. It prescribes the choice of BOLDUC pavers and slabs for landscaping purposes. It should describe the geometric and physical characteristics and indicate the paver selected, its dimensions, color and Grenart finish.

PART 2 - PRODUCTS 2.1 Precast Concrete Pavers

.1 Precast concrete pavers complying with CSA A231.2 and the following prescriptions. .2 Concrete slab complying with CSA-A 231.1 standard and the following prescriptions.

.3 Prestige pavers and slabs supplied by BOLDUC. .1 Thickness:_ _________________________________ .2 Nominal Dimensions:___________________________ .3 Color:______________________________________ .4 Texture: Grenart finish

INSTALLATION Contact the technical service or go to Bolduc’s website at www.bolduc.ca to obtain the model specifications, installation guide or any other technical information.

† Copies of lab tests are available upon request. ** Tests performed as per CSA A231.2 * Tests performed as per CSA A231.1

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

Citadin ® 80 Paver

SimplicityandRefinement This large-sizedpaver’s straight lines and smoothfinish give it a very refined, contemporary touch. Features • 3 1/8 inch (8 cm) thickpavers • Smoothpremium finish • Choice of 3 colors • 1 color contributing toLEEDprogram

Citadin ® 80 Paver

TECHNICAL SPEC SHEET

Pavers contributing to LEED program Leed-certified solar reflectance index (Granite Gray)

COLORS

NOMINAL DIMENSIONS

HEIGHT XWIDTH X LENGTH

NUMBER OF PIECES

in

cm

/ft 2

/m 2

3 1/8 x15 3/4 x23 5/8 in

8x40x60cm

0.39 4.17

Granite Gray

Light Gray

DIMENSIONAL TOLERANCES † The permitted dimensional tolerances prescribed in the CSA A231.2 standard are the following:

Length: -1/32 in to 5/64 in (-1 mm to +2 mm) Width: -1/16 in to 5/64 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)

Anthracite

WEIGHT OF PAVERS: 38 lb/sq. ft. (183 kg/m 2 ) PHYSICAL CHARACTERISTICS † (PAVERS) COMPRESSIVE

RESISTANCE TO FREEZE-THAW CYCLES

WATER

NOTE: We recommend that you use actual samples to make your final choice.

STRENGTH** 7250 Psi (50 Mpa)

IN A SALINE SOLUTION** Maximum loss of initial weight

ABSORPTION

5% maximum

in saline solution (NaCl 3%): • 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

SPECIFICATION CLAUSE

SPEC. NOTE: Include the following article in Part 2 - Products of section 32 14 13 - Precast Concrete Pavers. It prescribes the choice of BOLDUC pavers for landscaping purposes. It should describe the geometric and physical characteristics and indicate the paver selected, its dimensions, color and finish.

PART 2 - PRODUCTS 2.1 Precast Concrete Pavers

.1 Precast concrete pavers complying with CSA A231.2 and the following prescriptions. .2 Citadin 80 pavers supplied by BOLDUC. .1 Thickness: 3 1/8 in. (8 cm)

.2 Nominal Dimensions: 3 1/8 x 15 3/4 x 23 5/8 in (8 x 40 x 60 cm) .3 Color:_ ____________________________________ .4 Texture: Smooth premium finish

INSTALLATION Contact the technical service or go to Bolduc’s website at www.bolduc.ca to obtain the model specifications, installation guide or any other technical information.

† Copies of lab tests are available upon request. ** Tests performed as per CSA A231.2

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

Linia TM Paver

SimplicityandRefinement! With its straight lines andflat surfaces,this paver is perfectly suited for contemporary and classical decors.Its thickness gives it the versatility tobe used in a variety of applica- tions,includingdriveways. Features • 4 in (10 cm) thick • Regular finish • Choice of 2 solid and contrasting colors

Linia TM Paver

TECHNICAL SPEC SHEET

COLORS

GEOMETRIC CHARACTERISTICS

NOMINAL DIMENSIONS

HEIGHT XWIDTH X LENGTH

NUMBER OF PIECES

in

cm

/ft 2

/m 2

Gray

Black

1. 3 15/16 x3 15/16 x17 3/4 2. 3 15/16 x7 7/8 x23 5/8

10x10x45 10x20x60

2.06 22.2

0.77

8.3

NOTE: We recommand that you use actual samples to make your final choice. When installing Gray or Black pavers, we recommend covering them with a membrane to protect from dirt and grime. Walk on the protective membrane during installation to prevent staining or spotting. We also recommend using a Teflon-coated vibrating plate on pavers during installation to protect stone surfaces. Once pavers have been installed and properly cleaned, we recommend applying a sealant for easier mainte- nance.

1

2

DIMENSIONAL TOLERANCES †

The permitted dimensional tolerances prescribed in the CSA A231.2, CSA A231.1 standards are the following: Length: -1/32 in to 5/64 in (-1 mm to +2 mm) Width: -1/32 in to 5/64 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)

WEIGHT OF PAVERS: 48.1 lb/sq. ft. (235 kg/m 2 )

PHYSICAL CHARACTERISTICS †

COMPRESSIVE STRENGTH* 7250 Psi (50 Mpa)

RESISTANCE TO FREEZE-THAW CYCLES

WATER

IN A SALINE SOLUTION** Maximum loss of initial weight

ABSORPTION

5% maximum

in saline solution (NaCl 3%): • 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

SPECIFICATION CLAUSE

SPEC. NOTE: Include the following article in Part 2 - Products of section 32 14 13 - Precast Concrete Pavers. It prescribes the choice of BOLDUC pavers for landscaping purposes. It should describe the geometric and physical characteristics and indicate the paver selected, its dimensions, color and finish.

PART 2 - PRODUCTS 2.1 Precast Concrete Pavers .1 Precast concrete pavers complying with CSA A231.2 and the following prescriptions.

.2 Linia pavers supplied by BOLDUC .1 Thickness: 3 15/16 in (10 cm)

.2 Nominal Dimensions:___________________________ .3 Color:______________________________________ .4 Texture: Regular finish

INSTALLATION

Contact the technical service or go to Bolduc’s website at www.bolduc.ca to obtain the model specifications, installation guide or any other technical information.

† Copies of lab tests are available upon request. * Tests performed as per CSA A231.2

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

Citadin ® ModularPaverandSlab

Classicandelegant With theirwell-definedflat surfaces, these square pavers and slabs fit well with contemporary,refineddecors. Features • 3 1/8 inch (8 cm) thickpavers and 2 3/8 inch (6 cm) thick slabs • Regular finish • Same cube includes 3different sizes for a greater variety of patterns • Choice of 3 solid and contrasting colors and2nuancedpaver colors • Choice of 2 solid and contrasting colors and2nuanced slab colors • 1 color contributing toLEEDprogram

Citadin ® ModularPaverandSlab

TECHNICAL SPEC SHEET

Pavers contributing to LEED program Leed-certified solar reflectance index (Granite Gray)

NOMINAL DIMENSIONS

PAVER COLORS

HEIGHT XWIDTH X LENGTH

NUMBER OF PIECES

in

cm

/ft 2

/m 2

Paver 1. 3 1/8 x6 3/8 x12 13/16 in 2. 3 1/8 x12 13/16 x12 13/16 in 3. 3 1/8 x12 13/16 x19 3/16 in Slab 4. 2 3/8 x6 3/8 x12 13/16 in 5. 2 3/8 x12 13/16 x12 13/16 in 6. 2 3/8 x12 13/16 x19 3/16 in

8x16.3x32.5cm 8x32.5x32.5cm 8x32.5x48.8cm 6x16.3x32.5cm 6x32.5x32.5cm 6x32.5x48.8cm

0.92 9.92

Ice Gray

Onyx Gray

Granite Gray

Gray

1

2

3

4

5

DIMENSIONAL TOLERANCES † The permitted dimensional tolerances prescribed in the CSA A231.1 and CSA A231.2 standard are the following:

Black

Gray and Charcoal

Length: -1/32 in to 5/64 in (-1 mm to +2 mm) Width: -1/16 in to 5/64 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)

WEIGHT OF PAVERS: 38 lb/sq. ft. (183 kg/m 2 ) WEIGHT OF SLABS: 28.5 lb/sq. ft. (137.5 kg/m 2 ) PHYSICAL CHARACTERISTICS † (PAVERS)

Beige and Brown

Travertine Beige

COMPRESSIVE STRENGTH** 7250 Psi (50 Mpa)

RESISTANCE TO FREEZE-THAW CYCLES

WATER

IN A SALINE SOLUTION** Maximum loss of initial weight

ABSORPTION

5% maximum

SLAB COLORS

in saline solution (NaCl 3%): • 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

PHYSICAL CHARACTERISTICS † (SLABS)

FLEXURAL (TRANSVERSE) RESISTANCE TO FREEZE-THAW CYCLES

WATER

STRENGTH** 653 Psi (4,5 Mpa)

IN A SALINE SOLUTION** Maximum loss of initial weight

ABSORPTION

Ice Gray

Onyx Gray

6% maximum

in saline solution (NaCl 3%): • 0.98 oz / pi2 (300 g/m2) after 28 cycles • 2.62 oz / pi2 (800 g/m2) after 49 cycles

SPECIFICATION CLAUSE

Gray

Gray and Charcoal

SPEC. NOTE: Include the following article in Part 2 - Products of section 32 14 13 - Precast Concrete Pavers. It prescribes the choice of BOLDUC pavers and slabs for landscaping purposes. It should describe the geometric and physical characteristics and indicate the paver selected, its dimensions, color and finish.

PART 2 - PRODUCTS 2.1 Precast Concrete Pavers

Black

Travertine Beige

.1 Precast concrete pavers complying with CSA A231.2 and the following prescriptions. .2 Concrete slab complying with CSA-A 231.1 and the following prescriptions.

.3 Citadin Modular pavers and slabs supplied by BOLDUC. .1 Thickness: _ ________________________________ .2 Nominal Dimensions:_ _________________________ .3 Color:_ ____________________________________ .4 Texture:____________________________________ finish (Regular)

Beige and Brown

INSTALLATION Contact the technical service or go to Bolduc’s website at www.bolduc.ca to obtain the model specifications, installation guide or any other technical information.

NOTE: We recommend that you use actual samples to make your final choice. When installing Gray, Ice Gray, Onyx Gray,Granite Gray or Black pavers or slabs, we recommend covering them with a membrane to protect from dirt and grime. Walk on the protective membrane during installation to prevent staining or spotting. We also recommend using a Teflon-coated vibrating plate on pavers or slabs during installation to protect stone surfaces. Once Citadin pavers or slabs have been installed and properly cleaned, we recommend applying a sealant for easier maintenance.

† Copies of lab tests are available upon request. ** Tests performed as per CSA A231.2 * Tests performed as per CSA A231.1

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

Richelieu Modular paverandslab

BeautyandNature! These pavers and slabs have a natural look that is perfectly suited to anyonewishing to addwarmth to their environment with an authentic touch. Features • Ideal for patios,decks anddriveways • 2 3/8 in (6 cm) thick slab • 3 1/8 in (8 cm) thinkpaver • Chiseled and cut finishwith a beleved edge • 3 sizes formodular installations • Choice of 9 colors

Richelieu Modular paverandslab

TECHNICAL SPEC SHEET

COLORS

NOMINAL DIMENSIONS HEIGHT XWIDTH X LENGTH

NUMBER OF PIECES

in

cm

/ft 2

/m 2

Paver 1. 3 1/8 x6 3/8 x12 13/16 in 2. 3 1/8 x12 13/16 x12 13/16 in 3. 3 1/8 x12 13/16 x19 3/16 in Slab 4. 2 3/8 x6 3/8 x12 13/16 in 5. 2 3/8 x12 13/16 x12 13/16 in 6. 2 3/8 x12 13/16 x19 3/16 in

8x16.3x32.5cm 8x32.5x32.5cm 8x32.5x48.8cm 6x16.3x32.5cm 6x32.5x32.5cm 6x32.5x48.8cm

0.92 9.92

Ice Gray

Nordic Gray

1

2

3

4

5

6

Gray and Charcoal

Sandy Gray

DIMENSIONAL TOLERANCES † The permitted dimensional tolerances prescribed in the CSA A231.2 and CSA A231.1 standards are the following:

Length: -1/32 in to 5/64 in (-1 mm to +2 mm) Width: -1/32 in to 5/64 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)

WEIGHT OF PAVERS: 38 lb/sq. ft. (183 kg/m 2 ) WEIGHT OF SLABS: 28,5 lb/sq. ft. (137,5 kg/m 2 ) PHYSICAL CHARACTERISTICS † (PAVERS)

Black

Travertine Beige

COMPRESSIVE STRENGTH** 7250 Psi (50 Mpa)

RESISTANCE TO FREEZE-THAW CYCLES

WATER

IN A SALINE SOLUTION** Maximum loss of initial weight

ABSORPTION

5% maximum

in saline solution (NaCl 3%): • 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

PHYSICAL CHARACTERISTICS † (SLABS)

Sandhill Beige

Ashen Beige

FLEXURAL (TRANSVERSE) RESISTANCE TO FREEZE-THAW CYCLES

WATER

STRENGTH*

IN A SALINE SOLUTION* Maximum loss of initial weight

ABSORPTION

653 Psi (4.5 Mpa)

6% maximum

in saline solution (NaCl 3%): • 0.98 oz / pi2 (300 g/m2) after 28 cycles • 2.62 oz / pi2 (800 g/m2) after 49 cycles

SPECIFICATION CLAUSE

Indiana Beige

SPEC. NOTE: Include the following article in Part 2 - Products of section 32 14 13 - Precast Concrete Pavers. It prescribes the choice of BOLDUC pavers and slabs for landscaping purposes. It should describe the geometric and physical characteristics and indicate the paver selected, its dimensions, color and finish.

NOTE: We recommand that you use actual samples to make your final choice. We also recommend using a Teflon-coated vibrating plate on pavers and slabs during installation to protect stone surfaces.

PART 2 - PRODUCTS 2.1 Precast Concrete Pavers

.1 Precast concrete pavers complying with CSA A231.2 and the following prescriptions. .2 Concrete slab complying with CSA-A 231.1 and the following prescriptions.

.3 Richelieu pavers and slabs supplied by BOLDUC. .1 Thickness: _ ________________________________ .2 Nominal Dimensions:_ _________________________ .3 Color:_ ____________________________________ .4 Texture: Carved finish

INSTALLATION

Installation Patterns

Contact the technical service or go to Bolduc’s website at www.bolduc.ca to obtain the model specifications, installation guide or any other technical information.

Runner

Modular

† Copies of lab tests are available upon request. ** Tests performed as per CSA A231.2 * Tests performed as per CSA A231.1

Sainte-Marie: (418) 387-2634 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park Sainte-Marie, Beauce, Québec, Canada G6E 1G8

www.bolduc.ca www.bolduc.us info@bolduc.ca

Printed in Canada

SupraAcadia ® Paver

Refinement andRelaxation With its contemporary elegance,this large- size paver adds style to any layout. QualitiesandCharacteristics • Choice of four colors • 3 1/8”thick • Three different paver shapes • Installation canbemodular or in runner patterns •Natural finish • Blendswell withAppalachian,Sutton or Laurentianwallstones

SupraAcadia ® Paver

TECHNICAL SPEC SHEET

COLORS

VARIATION IN PAVER LENGTH HEIGHT XWIDTH X LENGTH

NUMBER OF PIECES

in.

cm

/ft 2

/m 2

1. 3 1/8 x5 7/8 x11 13/16 2. 3 1/8 x11 13/16 x11 13/16 3. 3 1/8 x11 13/16 x17 3/4

8x15x30 8x30x30 8x30x45

1.03 11.1

Sandy Gray

Ashen Beige

3

1

2

DIMENSIONAL TOLERANCES † Permissible dimensional tolerances under the CSA A231.2 standard are as follows: Length: ±1/16 in (-1 mm to +2 mm) Width: ±1/16 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)

Sandhill Beige

Indiana Beige

NOTE: We recommend that you use actual samples to make your final choice.

THICKNESS: 3 1/8 in. (8 cm) PHYSICAL CHARACTERISTICS †

Installation Patterns Runner

COMPRESSIVE STRENGTH** 7250 psi (50 MPa)

DURABILITY TO FREEZE-THAW CYCLES WITH WATER

UTILISATION OF DE-ICING SALTS** Maximum loss of mass in saline solution • 0.74oz/ft 2 (225 g/m 2 ) after 28 cycles • 1.64oz/ft 2 (500 g/m 2 ) after 49 cycles (NaCl 3%) :

ABSORPTION

5% maximum

after 28 days’ conditioning

INSTALLATION PATTERNS

Modular

† Laboratory test reports available on request ** Tested under CSA A231.2 standard

Sainte-Marie:

(418) 387-2634

Québec: (418) 692-0855 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park, P.O. Box 608, Sainte-Marie, Beauce, Québec, Canada G6E 3B8

www.bolduc.us info@bolduc.us

Printed in Canada

Acadia ™ Paver

HarmonyandRefinement Noble and elegant,this paver is a harmonious blendof natural stones. QualitiesandCharacteristics • Choice of four colors. • 2 3/4”thick. • Four different paver shapes. •Modular or runner installation. • 12”x 12”paving stone on a separate cube. •Natural finish. • Blendswell withAppalachian,Sutton andLaurentianwallstones.

BOL-FeuilletPaveAcadia_ANG.indd 1

11-03-18 10:17

Acadia ™ Paver

TECHNICAL SPEC SHEET

Colors

VARIATION IN PAVER LENGTH HEIGHT XWIDTH X LENGTH

NUMBER OF PIECES

in.

cm

/ft 2

/m 2

Module1 1. 2 3/4 x3 15/16 x7 7/8 2. 2 3/4 x7 7/8 x7 7/8 3. 2 3/4 x7 7/8 x11 13/16 Module2 4. 2 3/4 x11 13/16 x11 13/16

7x10x20 7x20x20 7x20x30

2.32

25

Sandy Gray

Sandhill Beige

7x30x30

1

2

3

4

Paversnos.1,2,3areavailableonasamecube. Paverno.4isaloneonacubewhichgivestheoptionto laysoldiercoursesorsimply installa12x12pattern.

Ashen Beige

Indiana Beige

Dimensional Tolerances † Permissible dimensional tolerances under the CSA A231.2 standard are as follows: Length: ±1/16 in (-1 mm to +2 mm) Width: ±1/16 in (-1 mm to +2 mm) Height: ±1/8 in (±3 mm)

Note: We recommend that you use actual samples to make your final choice.

Thickness: 2 3/4 in. (7 cm) Physical Characteristics † Compressive

Durability to Freeze-Thaw Cycles with Water

Strength** 7250 psi (50 MPa)

Utilisation of De-Icing Salts** Maximum loss of mass in saline solution • 0.74oz/ft2 (225 g/m2) after 28 cycles • 1.64oz/ft2 (500 g/m2) after 49 cycles (NaCl 3%) :

Absorption

5% maximum

after 28 days’ conditioning

Installation Patterns

1

2

3

Soldiercourse

† Laboratory test reports available on request ** Tested under CSA A231.2 standard

Sainte-Marie:

(418) 387-2634

Québec: (418) 692-0855 Toll free Canada: 1-800-463-8966 Toll free USA: 1-800-603-5567 Fax: (418) 387-6438

1358–2nd Street, Industrial Park, P.O. Box 608, Sainte-Marie, Beauce, Québec, Canada G6E 3B8

www.bolduc.us info@bolduc.us

Printed in Canada

BOL-FeuilletPaveAcadia_ANG.indd 2

11-03-18 10:18

Citadin ® Slab

Classicandelegant This large-size contemporary style slab is offered invery trendy colours.Ivory,granite gray and anthracite are among themost distinctive.Ideal for urbangardens and rooftop terraces. Features • 2 1/2 in (6.5 cm) thick •Available in a smoothfinish • Choice of 4 solid and contrasting colors • 3different sizes for a greater variety of patterns • 2 colors contributing toLEEDprogram

Made with FlippingBook flipbook maker