HexArmor Catalogue - Helix

Authorised Distributor: Northrock Safety Equipment Pte Ltd

Every worker. Every glove. Every day. Cut resistance is in our DNA. It’s who we are. We’ve spent more than a decade solving the toughest problems other manufacturers said couldn’t be solved. Along the way, we’ve eliminated millions of hand injuries, and subsequently, our customers started asking for more industry-leading glove solutions. They wanted a glove line that covered the entire cut spectrum. So, we went to work. The Helix ® series brings you the best, highest quality line-up of seamless coated gloves on the market, covering the entire cut resistance range with multiple knit and coating options: the Helix ® Series. Innovation intertwined with cut-resistance, high dexterity and a breadth of grip options - that’s the Helix ® Series. Helix ® from HexArmor ® features exceptional knit gloves with strong, yet extremely dexterous, natural, and engineered yarns that offer the largest range of protection on the market. A series that answers the call of duty from the manufacturing floor to the construction site, these knit gloves have consistent sizing and fit in a variety of palm coatings that can be used for everything – wet, oily, or dry applications.

With Helix ® , no matter the application, there’s a proper glove available, from the oil field, to the manufacturing floor, to the paper mill.

Cut resistance The Helix ® line covers the largest range of cut resistant seamless gloves, from level A1 to A6, as well as the highest ANSI/ISEA cut gram score 18-gauge gloves (1900 grams) and 13-gauge gloves (3900 grams) in the industry.

Grip options When it comes to grip – you have options – options that outperform competitors: no more slipping, dropping or mishandling because of inadequate grip formulations.

877.MYARMOR | hexarmor.com

Glove materials Palm coatings

4 6 8

Innovation

Helix ® series gloves

12 28 30 31

Cut standards explained

Glove trial

Proper glove care

HexArmor ® Helix ® Series I Page 3

Glove materials

You may sometimes hear knit gloves referred to as a “13-gauge” or “18-gauge” glove. The term gauge simply refers to the size and type of needles used in a seamless knitting machine to produce a glove. The lower the gauge of a glove, the bulkier and less dexterous it is. The higher the gauge a glove is, the thinner and more dexterous and comfortable the glove can be.

21G

7G

10G

13G

15G

18G

Comfort and dexterity Low

Very good High

Very High

Fair

Good

10G HPPE/steel Strong, high performance polyethylene (HPPE) yarns are combined with specialty steel yarns that give gloves a certain level of toughness not found with other combinations. These high-cut materials intertwined together give gloves a high-comfort, high performance fit. Found on the 2089.

Steel

Synthetic Fiber

HPPE

13G HPPE/fiberglass Fiberglass breaks down the threat of a cutting edge, and when combined with the protective cover of HPPE – a strong, composite polyethylene yarn – this knit creates a tough, mid-cut glove shell. Found on the 1071, 1073, 2076, 2085, 2086X, 2088.

Fiberglass

Synthetic Fiber

HPPE

Elastane

13G HPPE/fiberglass/steel A high-performance polyethylene yarn (HPPE) and fiberglass blend combined with steel yarn provides a high-cut knit material with the toughness of steel without compromising dexterity. Found on the 2050, 2051, 2052, 2074, 3010, 3012, 3020, 3022.

Fiberglass

Steel

HPPE

Synthetic Fiber

877.MYARMOR | hexarmor.com

13G Core9 ™ Core9™ technology by HexArmor ® sets the standard for high-performance in a knit glove with an innovatively engineered 13-gauge HPPE/Fiberglass/ Steel material, complete with optimal covering and spinning, that meets ANSI/ISEA level A9 cut resistance trial after trial. Our revolutionary design calls for higher cut-resistant filaments to be woven on the outside, while including a softer-feeling cut-resistant knit on the inside – a game-changer for glove comfort and longevity of use. Found on the 2060, 2061, and 2062.

Elastane

Fiberglass

Steel

HPPE

Synthetic Fiber

13G aramid/steel Along with being one of the most thermally-stable materials, Aramid is an incredibly strong synthetic yarn with high abrasion resistance. When combined with steel, gloves with these yarns are highly cut resistant with a flexible feel. Found on the 2080.

Steel

Aramid

Acrylic

15G Dyneema ® Diamond Thinner than conventional synthetic yarns, Dyneema ® Diamond has similar performance to gloves with fiberglass, but with a lighter, cooler and more flexible feel. This highly abrasion-resistant knit doesn’t trap heat like other cut-resistant materials – instead it radiates heat away from hands so that they stay comfortable and dry all day. Found on the 2066.

Elastane

Dyneema ® Diamond

Nylon

15G nylon/elastane The silky thermoplastic polymers of nylon are wound together with elastane, a synthetic yarn known for its exceptional elasticity. Together, these yarns give gloves flexibility and movement while providing a high level of abrasion resistance. Found on the 1070, 1091, 1092, 1095.

Nylon

Elastane

HexArmor ® Helix ® Series I Page 5

Helix ® series gloves offer a wide variety of grip options to provide users with the appropriate grip for the task at hand. HexArmor ® has you covered for any working condition, and we’re constantly researching and testing new formulas and application methods to maximize grip and function, helping workers redefine safety at their worksite. Palm coatings

Coating type:

Polyurethane (PU) Polyurethane (PU)

Natural rubber latex Natural rubber latex

Coating:

Lightweight, flexible, durable, grip, good abrasion and puncture resistance.

Flexible, more resistant to abrasion compared to PU and nitrile. Minimal tackiness.

Description:

Finish:

Textured, tacky

Wrinkle

Weight:

Lightweight

Heavy

Breathability:

Great

Poor

Flexibility:

Excellent

Fair

Grip:

Wet or Dry

Dry or wet

Food Safe: Characteristics Grip Dry: Oil:

No

Yes

Good

Excellent

Good

Not recommended

Wet:

Good

Good

Sensitive to heat. Cannot be used in oils or solvents. Can cause allergic reactions due to presence of latex.

Porous, coating often covers inside of glove, high permeability, DMF levels. 1076, 1093, 2050, 2057, 2058, 2060, 2068X, 2075, 2076, 2085, 3012, 3020,

Limitations:

Products:

2061, 2086X, 3070

877.MYARMOR | hexarmor.com

Nitrile

Nitrile

Nitrile

Sandy nitrile

Foam/sponge nitrile

Micro nitrile

Abrasion resistant. More elastic and form fitting compared to other nitrile coatings.

Sponge coating (chemically foamed) is softer and more flexible than flat nitrile.

Formulated to be thinner than nitrile foam coating. Microfoam coatings can have a slightly tacky finish.

Textured

Textured, slightly tacky

Smooth/light texture

Medium

Medium

Light weight

Good

Fair

Good

Good

Good

Great

Dry, oil, or wet

Dry, oil, or wet

Dry or oil

Yes

Yes

Yes

Good

Good

Good

Excellent

Good

Good

Very good

Fair

Fair

Lower abrasion resistance and durability compared to flat nitrile. Inherently soapy in wet environments and less permeable than sponge nitrile. 1095, 2062, 2065, 2073, 2074, 2077 1091, 1092, 2052, 2066, 2080, 2088 1070, 1071, 1073, 3015, 3025 Inherently soapy in wet environments and permeable.

HexArmor ® Helix ® Series I Page 7

Innovation

Ergonomic hand formers Because of HexArmor’s advanced manufacturing capabilities, we’ve gone beyond the industry standard to create the Helix ® Series. Ergonomic hand formers are used to achieve a true fit in the 2066 styles. From finger tips to wrist, helping to reduce hand fatigue, and increasing the consistency and quality of fit.

Health standards Most Helix ® series gloves are REACH compliant, with a handful tested by the ProDerm Institute for Applied Dermatological Research, ruling them free of silicones and solvents – making them safe for sensitive skin. The Helix 2066 also meet the stringent Oeko Tex Standard. This global standard tests every material in gloves for harmful substances and ensures that gloves were made in an environmentally friendly production facility.

In accordance with the criteria of Oeko-Tex ® Standard 100 tested textiles guarantee that there are no substances that affect human health. The safety gloves awarded this quality seal were clinically tested by the proDerm Institute for Applied Dermatological Research and are dermatologically approved. REACH Compliant: Avoidance of substances classified as carcinogenic, mutagenic or reprotoxic, persistent, bioaccumulative or toxic.

2066

877.MYARMOR | hexarmor.com

Design innovations While most gloves act as a safety barrier, when using hand held screwdriving tools, gloves can become a hazard when they get caught in these moving machine parts. This can pull the hand or finger into the equipment and cause severe injury to tendons, muscles, and ligaments – and can even sever the finger. Safe Finger Release Technology (SFR) is a high-tech innovation that features breakaway fingers, making it an ideal glove solution for applications where gloves need to be worn while operating hand held screwdriving tools that are powered pneumatically or electronically. See full disclaimer on hexarmor.com

2058

1092

HexArmor ® Helix ® Series I Page 9

Understanding your Helix ® glove label and performance

1 Glove identification number Easily reference the Helix ® glove product number here. 2 Glove size Most Helix ® glove sizing ranges from 5/XXS through 12/3XL. ANSI/ISEA Standard ANSI/ISEA 105 is the American national standard for glove selection criteria used by manufacturers to test and rate their products on cut, puncture, and abrasion resistance (abrasion scores range from 0–5 and are not listed on glove label). All Helix ® gloves come standard with an easy-to-read, feature rich label designed to help increase safety and compliance on the job.

1

2

3

4

5

ANSI/ISEA CUT

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION

A9

5

1

3 ANSI/ISEA cut level Cut levels range from Level A1 – Level A9, from least resistant to most resistant. 4 ANSI/ISEA puncture level Puncture levels range from Level 1 – Level 5, from least resistant to most resistant.

EN388 Standard EN388 is the European Union version of glove standardization laws, with the score denoted by

A. Abrasion: 0-4 B. Blade cut: 0-5/X C. Tear: 0-4 D. Puncture: 0-4 E. ISO cut: A-F/X P. Impact: P/blank

CE compliance and markings. 5 EN388/CE certification

A B C D E P

Score includes: abrasion, blade cut, tear, puncture, ISO cut, and impact resistance.

877.MYARMOR | hexarmor.com

Highperformanceseamlesscoatedgloves – Cut standard ratings Helix ® seamless gloves offer an incredible range of cut resistance, giving you the highest performing, most comfortable gloves on the market. With our innovatively intertwined glove yarns, Helix ® gloves provide the highest gram scores of their kind.

= Helix+ ® with SuperFabric ®

100 GRAMS

A1 200-499

A2 500-999 B 5N-10N

A3 1000-1499

A4 1500-2199

A5 2200-2999

A6 3000-3999

A7 4000-4999

A8 5000-5999

A9 6000+

ANSI/ISEA 105-116 grams EN 308:2016 ISO 13996

A 2N-5N

C 10N-15N

D 15N-22N

E 22N-30N

F 30N+

3010

1070

1071

1073

2065

2074

2050

2060

9010

Sandy nitrile palm

Sandy nitrile palm

PU palm

PU palm

PrimeFoam nitrile palm w/ impact protection

Micro foam nitrile palm

Micro foam nitrile palm

Micro foam nitrile palm

Flat nitrile palm

1091

2068X PU palm

2085

2051

2061

2076

9013

3012

Foam nitrile palm

PU palm

Uncoated liner

Wrinkle rubber latex palm

PU palm

Sandy nitrile palm

PU palm w/ impact protection

General Duty and Cut

1095

2086X

3020

3015

2080

2052

2062

Wrinkle rubber latex palm

PU palm

Sandy nitrile palmw/ impact protection

Micro foam nitrile palmw/ impact protection

Foam nitrile palm

Foam nitrile palm

Sandy nitrile palm

3022

9011

3016

3050

3060

PrimeSoft nitrile palm

PrimeFoam nitrile palm

Wrinkle rubber latex palm

Ultra-thin foam nitrile palm w/ impact protection

PU palm

2066

3025 Micro foam nitrile palm

3023

9015

3062

Foam nitrile palm

PrimeFoam nitrile palm

Wrinkle rubber latex palm

Ultra-thin micro foam nitrile palm

OEKO-TEX ® Certified & Ergonomic Handformers

3054

3055

3084

Foam nitrile palm

XG foam nitrile palm

SXG foam silicone palm

2073

1092

2057

3070

Sandy nitrile palm cold weather

Foam nitrile palmw/ Safe Finger Release

PU palm fiberglass-free steel-free

full latex coating

2077

2058

Sandy nitrile palm cold weather

PU palm w/ Safe Finger Release

Specialty

3033 Uncoated liner FDA compliant

2059

Sandy nitrile palm cold weather

3071

full latex coating

2043

2044

2041

knit sleeve fiberglass-free FDA compliant

knit sleeve fiberglass-free

knit sleeve FDA compliant

Cut-resistant knit sleeves

2042

knit sleeve

HexArmor ® Helix ® Series I Page 11

Dexterity, durability, and purpose-built grip No matter what the job, there’s a Helix ® glove for your needs. Each glove in the Helix ® series is made with high-quality yarns, providing a high-dexterity, extremely comfortable shell that can be worn all day without causing hand fatigue. This light duty line of knit gloves offers a variety of palm coatings that can be used for wet, oily, and dry situations, and provides additional abrasion resistance.

877.MYARMOR | hexarmor.com

1070 Helix ® • Knit: High-performance nylon/Spandex blend shell • Coating: Micro foam nitrile palm coating provides

superior grip and abrasion resistance • Seamless construction for enhanced comfort and breathability • Elastic knit wrist helps prevent dirt and debris from entering the glove • Silicone-free Available in sizes 5/XXS through 12/3XL

ANSI/ISEA CUT GRAM SCORE A1 296

4131X

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION

2

3

1071 Helix ® • Knit: HPPE and fiberglass blend shell • Coating: Micro foam nitrile palm dip • Reinforced thumb saddle • Seamless construction for enhanced comfort and breathability • Silicone-free Sizes 5/XXS through 12/3XL

HPPE Blend Shell

ANSI/ISEA CUT GRAM SCORE A2 856

4342B

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION

3

3

1073 Helix ® • Knit: HPPE and fiberglass blend shell • Coating: Micro foam nitrile palm coating provides

HPPE Blend Shell

superior grip and abrasion resistance • Seamless construction for enhanced comfort and breathability • Elastic knit wrist helps prevent dirt and debris from entering the glove • Reinforced thumb saddle • Silicone-free Available in sizes 5/XXS through 12/3XL

ANSI/ISEA CUT GRAM SCORE A3 1050

4544C

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION

5

4

HexArmor ® Helix ® Series I Page 13

1091 Helix ® • Knit: High-performance 15-gauge nylon shell • Coating: Flexible foam nitrile palm coating provides superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove • Silicone-free Available in sizes 6/XS through 11/XXL

ANSI/ISEA CUT GRAM SCORE A1 300

4122X

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION

3

3

1092 Helix ® • Knit: High-performance 15-gauge nylon blend shell • Coating: Flexible foam nitrile palm coating provides

superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove

ANSI/ISEA CUT GRAM SCORE A1 300

3121X

ANSI/ISEA ABRASION

ANSI/ISEA PUNCTURE

4

2

• Safe Finger Release (SFR) Technology for use while operating hand held screwdriving tools that are powered pneumatically or electronically. This glove has not been tested for use with drilling tools, milling machines, grinding machines, or lathes. See full disclaimer on hexarmor.com • Silicone-free Available in sizes 5/XXS through 12/3XL

1095 Helix ® • Knit: High-performance 15-gauge nylon blend shell • Coating: Flexible sandy nitrile palm coating • Elastic knit wrist helps prevent dirt and debris from entering the glove • Back-of-hand IR-X ® Impact Exoskeleton™ with high-flex design • Reinforced thumb saddle Available in sizes 5/XXS through 12/3XL

Impact Protection

Nylon Blend Shell

4

ANSI/ISEA 138 ANSI/ISEA CUT A1

GRAM SCORE 255 4121XP

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION

6

2

877.MYARMOR | hexarmor.com

2050 Helix ® • Knit: HPPE, Steel, and fiberglass blend shell • Coating: Flexible polyurethane palm coating • Hi-vis color enhances visibility and compliance • Sanitized Available in sizes 5/XXS through 12/3XL

HPPE Blend Shell

ANSI/ISEA CUT

GRAM SCORE 4052

4X42F

A7 ANSI/ISEA PUNCTURE 3

ANSI/ISEA ABRASION

6

2051 Helix ® • Knit: HPPE, Steel, and fiberglass blend shell • Can be used as a glove or underglove with appropriate top-glove solution • Elastic knit wrist helps prevent dirt and debris from entering the glove • Hi-vis color enhances visibility and compliance Available in sizes 5/XXS through 12/3XL

HPPE Blend Shell

ANSI/ISEA CUT A7

GRAM SCORE 4401 1X42F

ANSI/ISEA PUNCTURE 3

ANSI/ISEA ABRASION 4

2052 Helix ® • Knit: HPPE, Steel, and fiberglass blend shell • Coating: Flexible foam nitrile palm coating • Touchscreen capabilities • Hi-vis color enhances visibility and compliance Available in sizes 5/XXS through 11/XXL

HPPE Blend Shell

ANSI/ISEA CUT GRAM SCORE A7

ANSI/ISEA ABRASION 4331

3X43F

ANSI/ISEA PUNCTURE 4

5

HexArmor ® Helix ® Series I Page 15

2057 Helix ® • Knit: HPPE blend shell is fiberglass-free and steel-free for sensitive skin • Coating: Flexible polyurethane palm coating • Elastic knit wrist helps prevent dirt and debris from entering the glove • Hi-vis color on back-of-hand Available in sizes 5/XXS through 12/3XL

HPPE Blend Shell

ANSI/ISEA CUT GRAM SCORE A4 1807

4343C

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION

4

6

2058 Helix ® • Knit: 13-gauge HPPE blend shell • Coating: Flexible polyurethane palm coating

HPPE Blend Shell

• Safe Finger Release (SFR) Technology for use while operating handheld screwdriving tools that are powered pneumatically or electronically. This glove has not been tested for use with drilling tools, milling machines, grinding machines, or lathes. See full disclaimer on hexarmor.com • Touchscreen capabilities Available in sizes 6/XS through 11/XXL

ANSI/ISEA CUT GRAM SCORE A4

ANSI/ISEA ABRASION 1571

PENDING

ANSI/ISEA PUNCTURE

4

6

2059 Helix ® Cold Weather • Knit: 18-gauge acrylic and fiberglass blend shell • Coating: Flexible sandy nitrile 3/4 palm coating • Elastic knit wrist helps prevent dirt and debris from entering the glove • Hi-vis color on back-of-hand • Fleece lining Available in sizes 6/XS through 12/3XL

Acrylic Blend Shell

ANSI/ISEA CUT GRAM SCORE A4 1550

PENDING

ANSI/ISEA PUNCTURE 2

877.MYARMOR | hexarmor.com

2060 Helix ® • Knit: Core9™ (13-gauge HPPE, steel, and fiberglass blend shell) • Coating: Polyurethane palm coating provides superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove • Hi-vis color on back-of-hand • Touchscreen capabilities Available in sizes 5/XXS through 12/3XL

Core9™ Shell

ANSI/ISEA CUT

GRAM SCORE

5 5 A9 6091 ANSI/ISEA ABRASION

4X44F

ANSI/ISEA PUNCTURE

2061 Helix ® • Knit: Core9™ (13-gauge HPPE, steel, and fiberglass blend shell) • Coating: Wrinkle rubber latex palm coating provides superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove • Hi-vis color on back-of-hand Available in sizes 5/XXS through 12/3XL

Core9™ Shell

ANSI/ISEA CUT

GRAM SCORE

3X44F

A9 6195

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION 3

5

2062 Helix ® • Knit: Core9™ (13-gauge HPPE, steel, and fiberglass blend shell) • Coating: Sandy nitrile palm coating provides superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove • Hi-vis color on back-of-hand Available in sizes 5/XXS through 12/3XL

Core9™ Shell

ANSI/ISEA CUT GRAM SCORE A9 6437

4X44F

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION 5

5

HexArmor ® Helix ® Series I Page 17

2065 Helix ® • Knit: 13-gauge HPPE and nylon shell • Coating: Flexible sandy nitrile palm coating • Elastic knit wrist helps prevent dirt and debris from entering the glove • Full flat nitrile coating offers 360° water resistance Available in sizes 5/XXS through 12/3XL

HPPE Blend Shell

ANSI/ISEA CUT GRAM SCORE A4 1974

4X42D

ANSI/ISEA PUNCTURE 3

ANSI/ISEA ABRASION 6

2066 Helix ® • Knit: 15-gauge Dyneema ® Diamond shell, made with 45% bio-based HPPE, provides lightweight, cool comfort and offers 360° degree cut protection • Coating: Flexible water-based aqua-polymer nitrile foam palm coating provides superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove • CO2-netural production and free of solvents • Oeko-Tex certified, ProDerm certified, and REACH compliant for being skin-safe and void of harsh chemicals • Silicone-free Available in sizes 6/XS through 11/XXL Sold in packs of 12 Engineered in Germany

Dyneema ® Diamond Shell

ANSI/ISEA CUT GRAM SCORE A3 1346

4X42C

ANSI/ISEA ABRASION

ANSI/ISEA PUNCTURE 3

6

Contains bio-based materials

Scan to learn about protecting planet information

2068X Helix ® • Knit: 13-gauge HPPE and nylon blend shell • Coating: Polyurethane palm coating provides lightweight grip and superior abrasion resistance • Electrostatic discharge properties • Touchscreen capabilities • Silicone-free Available in sizes 5/XXS through 12/3XL

HPPE Blend Shell

ANSI/ISEA CUT GRAM SCORE A2 769

4243X

ANSI/ISEA PUNCTURE 4

ANSI/ISEA ABRASION

6

877.MYARMOR | hexarmor.com

2073 Helix ® Cold Weather • Knit: 13-gauge acrylic and fiberglass blend shell

Acrylic Blend Shell

• Coating: Flexible sandy nitrile full coating • Full double-dipped coating offers 360° cut protection and water resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove • Hi-vis color on wrist • Fleece lining for warmth • Touchscreen capabilities Available in sizes 6/XS through 11/XXL

EN388: 2016

ANSI/ISEA CUT GRAM SCORE A6 3132

4X43E EN511: 2006

ANSI/ISEA PUNCTURE 4

ANSI/ISEA ABRASION 4

12X

2074

HPPE Blend Shell

Helix ®

• Knit: 13-gauge HPPE, steel, and fiberglass blend shell • Coating: Flexible sandy nitrile palm coating • Reinforced thumb saddle Available in sizes 5/XXS through 12/3XL

ANSI/ISEA CUT GRAM SCORE A6 3825

4X42D

ANSI/ISEA PUNCTURE 3

ANSI/ISEA ABRASION

5

2076 Helix ® • Knit: 13-gauge HPPE and fiberglass blend shell • Coating: Flexible polyurethane palm coating • Reinforced thumb saddle • Elastic knit wrist helps prevent dirt and debris from entering the glove • Silicone-free Available in sizes 4/3XS through 12/3XL

HPPE Blend Shell

ANSI/ISEA CUT GRAM SCORE A6 3276

4X44F

ANSI/ISEA ABRASION

ANSI/ISEA PUNCTURE 5

5

HexArmor ® Helix ® Series I Page 19

2077 Helix ® Cold Weather • Knit: 13-gauge acrylic and fiberglass blend shell • Coating: Flexible sandy nitrile palm coating • Elastic knit wrist helps prevent dirt and

Acrylic Blend Shell

debris from entering the glove • Hi-vis color on back-of-hand • Fleece lining Available in sizes 6/XS through 12/3XL

ANSI/ISEA CUT GRAM SCORE A6 3132

4X43E

ANSI/ISEA PUNCTURE 4

ANSI/ISEA ABRASION 4

2080 Helix ® • Knit: 13-gauge aramid and steel blend shell • Coating: Flexible foam nitrile palm coating provides superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove • Silicone-free Available in sizes 6/XS through 11/XXL

Aramid Blend Shell

ANSI/ISEA CUT GRAM SCORE A6 3159

4X42F

ANSI/ISEA PUNCTURE 3

ANSI/ISEA ABRASION

6

Tested against the following within EN407: 5.2 Contact Heat Level 1

2085 Helix ® • Knit: 13-gauge HPPE and fiberglass blend shell • Coating: Flexible polyurethane palm coating provides superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove • Silicone-free Available in sizes 5/XXS through 12/3XL

HPPE Blend Shell

ANSI/ISEA CUT GRAM SCORE A4 1516

4X43C

ANSI/ISEA PUNCTURE 4

ANSI/ISEA ABRASION

6

877.MYARMOR | hexarmor.com

2086X Helix ® • Knit: 13-gauge HPPE and fiberglass blend shell • Coating: Flexible wrinkle rubber latex palm coating provides superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove Available in sizes 5/XXS through 11/XXL

HPPE Blend Shell

ANSI/ISEA CUT GRAM SCORE A4 1659

2X44D

ANSI/ISEA PUNCTURE 5

3010 Helix ® Core • Knit: 15-gauge HPPE, steel, and polyester blend shell • Coating: Flexible micro nitrile palm coating provides superior grip and abrasion resistance • Sewn-on back-of-hand IR-X ® Impact Exoskeleton™ with high-flex design provides ANSI/ISEA 138 Level 1 protection on knuckles and fingers • Reinforced thumb saddle • Enhanced touchscreen capabilities • Elastic knit wrist helps prevent dirt and debris from entering the glove Available in sizes 6/XS through 12/3XL

HPPE Blend Shell

4

ANSI/ISEA CUT GRAM SCORE

A5 2951 4X43DP ANSI/ISEA ABRASION

ANSI/ISEA PUNCTURE 4

ANSI/ISEA 138

6

3012 Helix ® Core • Knit: 15-gauge HPPE, steel, and polyester blend shell • Coating: Flexible polyurethane palm coating provides superior grip and abrasion resistance • Sewn-on back-of-hand IR-X® Impact Exoskeleton™ with high-flex design provides ANSI/ISEA 138 Level 1 protection on knuckles and fingers • Reinforced thumb saddle • Enhanced touchscreen capabilities • Elastic knit wrist helps prevent dirt and debris from entering the glove Available in sizes 6/XS through 12/3XL

HPPE Blend Shell

4

ANSI/ISEA CUT GRAM SCORE A5 2396

4X43DP

ANSI/ISEA ABRASION 5

ANSI/ISEA PUNCTURE 4

ANSI/ISEA 138

HexArmor ® Helix ® Series I Page 21

3015 Helix ® • Knit: 21-gauge, ultra-thin HPPE and steel blend shell • Coating: Flexible micro foam nitrile palm coating provides superior grip and abrasion resistance • Sewn-on back-of-hand IR-X ® Impact Exoskeleton™ with high-flex design provides ANSI/ISEA 138 Level 2 protection on knuckles and fingers • Reinforced thumb saddle • Enhanced touchscreen capabilities • Silicone-free Available in sizes 7/S through 12/3XL

HPPE Blend Shell

4

ANSI/ISEA CUT

GRAM SCORE

A2

712

PENDING

ANSI/ISEA ABRASION 5

ANSI/ISEA PUNCTURE

ANSI/ISEA 138

3

3016 Helix ® • Knit: 21-gauge, ultra-thin HPPE and steel blend shell • Coating: Flexible ultra-thin foam nitrile palm coating provides superior grip • Sewn-on back-of-hand IR-X ® Impact Exoskeleton™ with high-flex design provides ANSI/ISEA 138 Level 2 protection on knuckles and fingers • Reinforced thumb saddle

HPPE Blend Shell

4

ANSI/ISEA CUT

GRAM SCORE

A4

ANSI/ISEA PUNCTURE 1912

PENDING

• Enhanced touchscreen capabilities Available in sizes 7/S through 12/3XL

ANSI/ISEA 138

2

3020 Helix ® Core • Knit: 15-gauge HPPE, steel, and polyester blend shell • Coating: Flexible polyurethane palm coating provides superior grip and abrasion resistance • Elastic knit wrist helps prevent dirt and debris from entering the glove • Reinforced thumb saddle

HPPE Blend Shell

• Enhanced touchscreen capabilities Available in sizes 7/S through 11/XXL

ANSI/ISEA CUT GRAM SCORE A5 2396

4X43D

ANSI/ISEA PUNCTURE 4

ANSI/ISEA ABRASION 5

877.MYARMOR | hexarmor.com

3022 Helix ® Core • Knit: 15-gauge HPPE, steel, and polyester blend shell • Coating: Flexible micro nitrile palm coating provides superior grip and abrasion resistance • Reinforced thumb saddle • Enhanced touchscreen capabilities • Elastic knit wrist helps prevent dirt and debris from entering the glove Available in sizes 7/S through 11/XXL

HPPE Blend Shell

ANSI/ISEA CUT

GRAM SCORE

A5

2951 ANSI/ISEA ABRASION

4X43D

ANSI/ISEA PUNCTURE

6

4

3023 Helix ® Core • Knit: 15-gauge HPPE, steel, and polyester blend shell

HPPE Blend Shell

• Coating: PrimeFoam nitrile three-quarter palm and finger coating for increased grip and extreme abrasion resistance • Reinforced thumb saddle • Enhanced touchscreen capabilities • Elastic knit wrist helps prevent dirt and debris from entering the glove Available in sizes 6/XS through 11/XXL

ANSI/ISEA CUT

GRAM SCORE

A5

2396 ANSI/ISEA ABRASION

4X43D

ANSI/ISEA PUNCTURE

6

4

3025 Helix ® • Knit: 21-gauge, ultra-thin HPPE and steel blend shell • Coating: Flexible micro foam nitrile palm coating provides superior grip and abrasion resistance • Reinforced thumb saddle • Enhanced touchscreen capabilities • Silicone-free • Fiberglass-free Available in sizes 7/S through 12/3XL

HPPE Blend Shell

ANSI/ISEA CUT GRAM SCORE A4 1912

PENDING

ANSI/ISEA PUNCTURE 2

ANSI/ISEA ABRASION 5

HexArmor ® Helix ® Series I Page 23

3033 Helix ® Food Safe • Knit: 13-gauge HPPE and fiberglass blend

HPPE Blend Shell

shell engineered to specifically prevent glove particles from contacting food

• Can be used in direct contact with food or as an underglove with appropriate topglove solution

• US FDA 21 CFR 177.1630 Compliant Available in sizes 6/XS through 11/XXL

ANSI/ISEA ABRASION 4

ANSI/ISEA CUT GRAM SCORE A6 3825

ANSI/ISEA PUNCTURE 2

3050 Helix ® • Knit: 18-gauge HPPE, steel, fiberglass, and recycled polyester blend shell

HPPE Blend Shell

• Coating: Flexible PrimeSoft nitrile palm coating • Eco-friendly construction: each pair is made with recycled water bottle material

• Reinforced thumb saddle • Touchscreen capabilities • Silicone-free Available in sizes 5/XXS through 12/3XL

ANSI/ISEA CUT GRAM SCORE A6 3532

PENDING

ANSI/ISEA PUNCTURE 5

ANSI/ISEA ABRASION 6

Scan to learn about protecting planet information

Contains recycled plastic bottle content

3054 Helix ® Bamboo TwinFlex ® • Knit: 13-gauge HPPE/bamboo viscose/fiberglass/elastane blend shell provides fast absorption and high retention of moisture • Coating: Flexible water-based soft grip nitrile foam palm coating provides superior grip and abrasion resistance • Bamboo TwinFlex ® knit is sustainably produced with bamboo viscose fiber • German-engineered 3D ergo fit for ultimate dexterity, flexibility, and comfort • CO2-netural production, sustainably produced, and free of solvents Available in sizes 7/S through 11/XXL

Bamboo TwinFlex ® Shell

ANSI/ISEA CUT GRAM SCORE A3 1449

3X42C

ANSI/ISEA PUNCTURE 3

ANSI/ISEA ABRASION 5

Scan to learn about protecting planet information

Contains natural bamboo viscose fibers

877.MYARMOR | hexarmor.com

3055 Helix ® Bamboo TwinFlex ® • Knit: 18-gauge Bamboo viscose/HPPE/recycled polyamide/steel blend shell provides fast absorption and high retention of moisture • Coating: Flexible water-based aqua-polymer XG foam nitrile palm coating • Oeko-Tex certified, ProDerm certified, and REACH compliant for being skin-safe and void of harsh chemicals • German-engineered 3D ergo fit for ultimate dexterity, flexibility, and comfort • CO2-netural production, sustainably produced, and free of solvents • Touchscreen capabilities Available in sizes 6/XS through 12/3XL

Bamboo TwinFlex ® Shell

ANSI/ISEA CUT GRAM SCORE A4 1789

4X41D

ANSI/ISEA PUNCTURE 2

ANSI/ISEA ABRASION 6

Scan to learn about protecting planet information

Contains natural bamboo viscose fibers

• Lab tested in accordance with EN407 contact heat for a level 1 performance

3060 Helix ® • Knit: 18-gauge HPPE, steel, and Tungsten blend shell • Coating: Flexible polyurethane palm coating • Hi-vis color on back-of-hand

HPPE Blend Shell

• Reinforced thumb saddle • Touchscreen capabilities Available in sizes 6/XS through 11/XXL

ANSI/ISEA CUT

GRAM SCORE

A9

7894

PENDING

ANSI/ISEA PUNCTURE

4

3062 Helix ® • Knit: 18-gauge HPPE, steel, and Tungsten blend shell • Coating: Flexible ultra-thin micro foam nitrile palm coating • Hi-vis color on back-of-hand

HPPE Blend Shell

• Reinforced thumb saddle • Touchscreen capabilities Available in sizes 6/XS through 11/XXL

ANSI/ISEA CUT

GRAM SCORE

A9

7894

PENDING

ANSI/ISEA PUNCTURE

4

HexArmor ® Helix ® Series I Page 25

3070 Helix ® • Knit: 18-gauge HPPE, and fiberglass blend shell • Coating: Full latex coating offers 360° water resistance • Textured palm coating provides superior grip and abrasion resistance • Coated knit wrist helps prevent fluid and debris from entering the glove Available in sizes 7/S through 11/XXL

HPPE Blend Shell

ANSI/ISEA CUT

GRAM SCORE

A2

PENDING

933

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION 4

4

• Lab tested in accordance with EN407 contact heat for a level 1 performance

3071 Helix ® • Knit: 13-gauge HPPE/steel blend shell • Coating: Fully coated natural foam latex offers 360° fluid resistance • Wrinkle rubber palm coating provides superior grip and abrasion resistance • Coated knit wrist helps prevent fluid and debris from entering the glove Available in sizes 7/S through 11/XXL

HPPE Blend Shell

ANSI/ISEA CUT

GRAM SCORE

A6

PENDING

3711

ANSI/ISEA PUNCTURE

4

• Lab tested in accordance with EN407 contact heat for a level 1 performance

3084 Helix ® • Knit: 13-gauge HPPE/steel blend shell • Coating: Specialized SXG foam silicone palm coating provides an excellent grip with glass and solar panels while refraining from leaving finger marks and smudges behind, exclusive to HexArmor ® • Elastic knit wrist helps prevent dirt and debris from entering the glove Available in sizes 7/S through 11/XXL

HPPE Blend Shell

ANSI/ISEA CUT

GRAM SCORE

A5

PENDING

2482

ANSI/ISEA PUNCTURE

3

• Lab tested in accordance with EN407 contact heat for a level 1 performance

877.MYARMOR | hexarmor.com

2041 Helix ® arm guard • 18” long • Lightweight 13g HPPE, nylon, steel, fiberglass blend knit with industry-leading cut resistance • Specialized knit technology feels soft and cool on the interior • Knit upper arm cuff and thumb loop prevents dirt and debris from entering • Launderable for extended life and retains shape after repeated washings • US FDA 21 CFR 177.1630 Compliant Available in sizes S through XL

HPPE blend protective shell

ANSI/ISEA CUT GRAM SCORE

A7 4907 2X41F

ANSI/ISEA PUNCTURE

2

• Lab tested in accordance with EN407 contact heat for a level 1 performance

2042 Helix ® arm guard • 18” long • Lightweight 13g HPPE, nylon, steel, fiberglass blend knit with industry-leading cut resistance • Specialized knit technology feels soft and cool on the interior • Knit cuffs prevents dirt and debris from entering • Launderable for extended life and retains

HPPE blend protective shell

ANSI/ISEA CUT GRAM SCORE

A7 4907 2X41F

shape after repeated washings Available in sizes S through XL

ANSI/ISEA PUNCTURE

2

• Lab tested in accordance with EN407 contact heat for a level 1 performance

2043 Helix ® arm sleeve • 22” long • Lightweight HPPE and nylon blend knit with industry-leading cut resistance • Fiberglass-free and steel-free for sensitive skin • Knit upper arm cuff and thumb loop prevents

HPPE blend protective shell

dirt and debris from entering • Launderable for extended life • US FDA 21 CFR 177.1520 Compliant One size

ANSI/ISEA CUT GRAM SCORE

A5 2786 PENDING

2044 Helix ® heat resistant arm guard • 18” long • Lightweight aramid blend knit with industry-leading cut resistance • Silicone grip at bicep prevents slipping • Knit upper arm cuff and thumb loop prevents

Aramid blend protective shell

ANSI/ISEA CUT GRAM SCORE

dirt and debris from entering • Launderable for extended life Available in sizes S through XL

A6 3642 PENDING

ANSI/ISEA PUNCTURE

3

• Lab tested in accordance with EN407 contact heat for a level 1 performance

HexArmor ® Helix ® Series I Page 27

Cut standards explained

In February 2016, the standards outlined in the American National Standard Institute (ANSI) and International Safety Equipment Association (ISEA) for Hand Protection Selection Criteria (ANSI/ISEA 105-16) changed. In April 2018, changes were also made to the EN 388 European regulatory standard for protective gloves (CE). These new glove standards will help safety managers choose the proper hand protection with greater precision and confidence. Understanding the changes to the ANSI/ISEA 105 American national standard for hand protection To apply consistent meaning to ANSI/ISEA 105 cut ratings for the end user, a single test method is now used for establishing cut levels (ASTM F2992-15). In addition, the number of classification levels was expanded both to address the gaps of protection between cut levels and to model the classification approach used in similar international standards. The standard employs a 9-level scale (expressed as A1-A9) that spans 0 grams to 6,000 grams of cut resistance. This allows for more accurate identification of cut protection. The most significant change calls for cut level 4—which formerly ranged from 1,500 grams to 3,500 grams of cut resistance — to be divided into three separate levels. The more granular rating allows end users to better identify a level of cut resistance that meets their specific safety requirements. Cut Resistance Rating System: What’s Changing

7000

3000 4000 5000 6000

1000 2000 GRAMS 0

A1 Level 1 Level 2 Level 3 Level 4

Level 5 A2 A3 A4 A5 A6 A7 A8 A9

Pre-2016 ANSI/ISEA 105

NEW 2016 ANSI/ISEA 105

ANSI/ISEA 105 cut resistance testing In addition to a more accurate cut resistance classification scale, the ANSI/ISEA 105-16 now only references the Tomodynamometer Test Method (TDM) based on the ASTM F2992-15, discarding the Cut Protection Performance Tester (CPPT) methods formerly recognized as the alternative test(s). The TDM determines the amount of weight, measured in grams, necessary for a blade to achieve cut-through of PPE material at the reference distance of 20 MM of blade travel (a change from the old standards which referenced both 20 MM and 25 MM, depending on the testing standard used). Understanding the changes to the EN 388 European standard for cut resistance As of April 2018, a number of important changes were finalized to the EU cut resistance standard, EN 388. Most notably, the changes address inconsistencies with the Coup Test and provide additional cut levels for highly cut-resistant materials.

877.MYARMOR | hexarmor.com

EN 388 cut resistance testing + new glove markings The EN 388 standard now requires the Coup Test and the TDM-100 Test (ISO 13977) in certain situations. The TDM-100 test is required only if a highly cut-resistant material has not been cut through after 60 rotations with the Coup Test. However, the TDM-100 test can be used on its own without using the Coup Test first. With the Coup Test, a circular blade moves back and forth across a material sample under a fixed load of 500 grams (a very low force, amounting to less than one pound). The number of blade revolutions needed to cut through the material is then compared to a control sample. The ratio of the sample to the control is converted to an index that is applied to a five-point rating scale—1 (low) to 5 (high). With the updated standard, this test is limited to a maximum of 60 rotations, whether the blade has cut through the material or not. If the test reaches 60 rotations and the material has not been cut through, the TDM-100 test must then be implemented. The TDM testing machine measures cut resistance using a straight blade and variable weight (like the ANSI/ ISEA 105 cut test). The ISO 13997 reports results in Newtons and yields scores expressed by Letters A (low) to Level F (high). If the TDM Test is implemented, it is expressed as the fifth placement on the CE Marking, as seen on the “New Marking” portion of the graph below.

EN 388

EN 388

Pre-2018 marking

New marking

4 4 4 2

4 4 4 2 C P

Rating

Abrasion Cut (coup test) Tear Puncture Cut (TDM-100 test) Impact protection

1-4 1-4 1-4 1-5 A-F P

Rating

Abrasion

1-4 1-4 1-4 1-5

Cut (coup test) Tear Puncture

North American manufacturers and distributors are not required to certify their cut resistance The CE is the only certification-requiring body for PPE, meaning the product has been verifiably tested and results reported. CE marking is required before legally being sold into the European market. This is different from North America where the ANSI/ISEA establishes only standardizations for cut-resistant materials. This means North American manufacturers and distributors can claim cut resistance and sell their products in North America without ever testing them. If they do elect to test them for cut resistance, they can use any method they choose. For this reason, it is extremely important to gather information both about the material used in PPE, as well as the methods by which it is tested, before continuing with a purchase decision. HexArmor ® recommends following the ANSI/ISEA 105:2016 standard when selecting appropriate hand protection. The employer is ultimately responsible for providing PPE that meets employees’ needs Per OSHA regulations, the burden of responsibility concerning cut resistance falls on the employer. Though testing regulations and certifications are a viable starting point for the purchase decision process, they are never to be taken as isolated validation of the protection offered to an employee. Cut-resistant PPE manufacturers and suppliers can provide further understanding of cut testing Ask them questions and seek thorough explanations for the methods that they have selected to test their products. More information on each of these tests listed can be found on these websites: • www.astm.org • www.iso.org • www.cen.eu

HexArmor ® Helix ® Series I Page 29

The importance of a glove trial

A glove trial is the process of field-testing different models of safety gloves, either from a single source or several manufacturers, in order to identify the best glove for a particular job. When done correctly, the benefits of a glove trial include: • I mproved hand safety program and equipment and reduced rate of hand injuries • I ncreased awareness of hand safety issues among workers • Higher rates of compliance with hand safety PPE requirements • R eduction in costs related to hand protection, through increased efficiency and durability of work gloves, or reduced insurance rates, medical costs, and workers’ comp claims Work conditions vary from one job to another. There is no way to tell how effective a particular safety glove will be without testing it in the field to see how it holds up and protects against the actual hazards encountered in the workplace. Although a glove may have tested well in laboratory settings and been granted a high cut rating, it may lack abrasion resistance and break down quickly in the field. If a glove doesn’t offer the same level of protection at the end of the work day as it does at the beginning, then you need to consider another option. To ensure you avoid wasting time and energy on a poorly-run glove trial, we have outlined a set of proven steps you can take in the glove trial process. These tips and recommendations come from over a decade of experience working with large industrial companies.

For the full white paper, please contact your HexArmor ® rep, or visit https://www.hexarmor.com/trial-request

877.MYARMOR | hexarmor.com

How to properly care for your gloves Improper glove care can shorten the life of your PPE. It can also lead to dermatitis, decreased dexterity, loss of protective abilities, and odor. Glove care refers not only to laundering but also proper storage, routine glove checks, and knowledge of materials and their particular strengths and weaknesses. Cleaning + care Most gloves and arm and body PPE are machine washable. Please see hexarmor.com for product specific washing instructions. Increase your glove lifespan Laundering removes harmful chemicals, perspiration, and everyday grit and grime that can weaken

protective fibers and seams. Our team of HexArmor ® solutions specialists are here to help you with this process, and they are more than happy to provide you with all the information you need.

Because there are so many different work gloves on the market, experienced safety managers should be aware of what workers’ gloves are made of and how they will stand up to the applications they’re being used for. Common glove materials include nylon, spandex, leather, cotton, SuperFabric ® *, Kevlar ® , and knit fibers. Each of these materials has a certain way it needs to be cared for. Often there is a blending of the materials, making proper care even more crucial. Proper storage Gloves should be stored in clean, dry conditions, away from direct sunlight and extreme temperatures. Routine glove checks Glove life varies depending on the application, environment, and amount of use. It is vital that you perform routine glove checks before beginning work every day. Take note of areas that have begun to wear down, such as loose hook and loop closures or a worn-down name tag. If you see holes in the synthetic leather or TP-X ® material on the palm of your glove, this is an indication that its protective qualities may be compromised, putting you at risk of injury. Lingering moisture or a strong odor are also signs that your gloves may need to be replaced. Keeping an eye out for these issues (and others) takes you one step further from a worksite hand injury, which is the ultimate goal of hand protection.

HexArmor ® Helix ® Series I Page 31

Call 1-877-MY ARMOR or visit hexarmor.com HexArmor ® products are cut and puncture resistant, NOT CUT AND PUNCTURE PROOF. Do not use with moving or serrated blades or tools. User shall be exclusively responsible to assess the suitability of the product as specified for any individual application or use. Protection zones are to be used as a general guide. Actual product protection zones may differ.

Protected by patents and patents pending.

MKHC-0027

All products, product descriptions and performance scores are current as of November 2022 . For current product information, please visit hexarmor.com, or call 1-877-MY ARMOR

Made with FlippingBook - professional solution for displaying marketing and sales documents online