Chromalox Big Red Book

Heat Trace

Industrial Heaters & Systems

Component Technologies

PRODUCT CATALOG

Components

Components Overview

COMPONENT HEATERS

Component Heaters include the basic types of heating elements:

• Tubular Elements • Thin Blade Heaters • Strip Heaters • Ring & Disc Heaters • Band & Nozzle Heaters

• Cartridge Heaters • Flexible Heaters • Specialty Heaters

Component heaters may be used by themselves to solve many heating prob- lems. They may also be incorporated into more complex heating systems, providing a complete thermal solution for your heating requirements. Chromalox carries the widest selection of standard component heaters in many shapes, sizes and wattages. Chromalox is the “First Choice for Thermal Solutions”. Applications With component heaters, most often the shape and size will be the determining factor in most heater applications. Brief descriptions of each heater type follow, with selection guidelines that lead to a detailed description on individual product pages.

Thin blade heater elements provide more surface area than standard tubular elements to offer greater wattage or lower watt densities. Select from many sheath materials with watt densities to 75 W/in 2 and sheath temperatures as high as 1200°F. Heating elements can be as long as 120" and are capable of being formed into many configurations for heating via im- mersion, direct surface contact or convection. Three wire construction within the element provides uniform heating. Available in single or 3-phase current terminations with a 120 to 240 volt range.

Tubular heating elements perform excep- tional heat transfer by conduction, convection or radiation to heat liquids, air, gases and surfaces. In most heater assemblies, tubular element design configurations vary — round, triangular, flat press and formed. Bends are made to customer requirements Custom built from 0.200" to 0.625" diameters, a multitude of sheath materials with sheath temperature capabilities up to 1600°F, watt densities to fit many applications and up to 690 volts. Avail- able with over 20 optional terminations and many stocked accessories.

A-1

Components

Components Application Guidelines Applications (cont’d.) Strip/Ring/Disc heating elements are rug- ged and easy to install for heat transfer by conduction or convection to heat liquids, air, gases and surfaces with sheath temperatures up to 1500°F and watt densities to 35 W/in 2 . Common applications include drying, melting, baking and curing. Strip heater sizes range from 0.5" wide to 2.5" and lengths to 72" long. Heaters bolt or clamp to many surfaces. Nested ring heaters can provide concentrated heat in small areas. Select from many sheath materials, termination styles, operating tem- peratures, sizes, voltages, wattage ratings and mounting devices.

Band heaters grip tightly to cylindrical sur- faces to supply uniform heat transfer, critical to the heater life. Chromalox band heaters are flexible and come in one or two-piece construction for easy installation and removal. They accommodate diameters as small as 15/16" and as large as 20" and are capable of reaching sheath temperatures up to 1500°F. Stainless steel braids and conduit protect terminations and resist contamination. Com- pletely customize your heater by specifying exact physical dimensions, material, electric ratings and terminations. Cartridge heaters are high efficiency heating elements. Diameters of cartridge heaters range from 0.25" to 1.25". Watt densities from 25

W/in 2 to 200 W/in 2 and sheath temperatures to 1800°F. Optional end seals resist contaminants and moisture from entering inside the heater. Chromalox provides a variety of sizes, wattage ratings, voltages and protective features to meet many challenging applications. Flexible heaters are very versatile and provide solutions to a vast number of low-to-medium temperature applications. Heaters are manu- factured with rugged light-weight materials providing chemical and moisture resistance with operating temperatures to 392°F. Wire elements are durable and wound precisely within the structure for optimal performance. A variety of electrical, shape and contour fit- tings to meet many specifications.

Tubular Heaters — Section Outline Tubular Heaters — Selection Guidelines Section Page Application-Modifications A-7 Factory Bending A-8 Terminals A-10 Customer Bending A-12 Type Sheath Round INCOLOY ®

Diameter (In.)

Model

Page

0.475 0.475 0.475 0.430 0.375 0.315 0.260 0.246 0.200 0.475 0.475 0.475 0.475 0.475 0.475 0.315 0.475 0.475 0.315 0.5 0.375 0.375 0.375 0.375 0.430 0.375 0.375 0.5 0.375 0.475 0.315 0.475 0.315 0.475 0.315

TRI TRID TRIW TRI TRI TRI TRI TRI TSSM TRSS TRSSH TRSSN TRS TRSCD TRSC TRS TRC TRCC TRC

A-13 A-14 A-14 A-15 A-16 A-17 A-19 A-20 A-21 A-22 A-23 A-23 A-24 A-24 A-25 A-27 A-28 A-28 A-30 A-31 A-33 A-35 A-37 A-40 A-41 A-42 A-43 A-44 A-45 A-47 A-47 A-48 A-49 A-50 A-51 A-52 A-53 A-54 A-55 A-56

Stainless Steel

Steel

Copper

TI TI

Heart Shaped

INCOLOY ®

RTU UTU UTU-LT UTUA-LT URPT LMS

Steel

TS TS

0.375, 0.4375 0.375, 0.4375

ATS ATU STRI STRI STRS STRS STRC STRC FSRM

Flat Pressed

INCOLOY ® INCOLOY ®

Round/Single End

Steel

Copper

Hopper Heater Thin Blade Mini Tubular

INCOLOY ®

Stainless Steel

CTB MTH

A-2

Components

Components Selection Guidelines

COMPONENT HEATERS

Cartridge Heaters — Section Outline

Strip, Ring & Disc Heaters — Section Outline

Section

Page

Section

Page A-57 A-58 A-59 A-60

Application Guidelines Selection Guidelines

A-111 A-112 A-113 A-114 A-116

Application & Features Selection & Installation

Modifications Accessories

Installation Recommendations Modifications and Options Thermocouple Leadwire

Strip, Ring & Disc Heaters — Selection Guidelines

Cartridge Heaters — Selection Guidelines

Type

Size (In.)

Model

Page A-63 A-64 A-65 A-65 A-66 A-66 A-67 A-67 A-68 A-68 A-69 A-69 A-70 A-70 A-71 A-71 A-72 A-73 A-74 A-74 A-74 A-75 A-76 A-78 Page A-80 A-81 A-82 A-87 A-90 A-91 A-97

Type/Sheath

Size (In.)

Model

Page

Strip

1-1/2

OT S & SE ST PT TH STTH

1/4 - 3/4 1/8-3/4

CIR

A-117 A-124 A-125 A-126 A-128 A-130 A-130 A-131 A-132

INCOLOY ®

SS

C-DD

Brass

15/16 - 1-19/64 C-HD .495, .685, .935 MZ

INCONEL ® 600

Split

3/8 - 1

SST/QST

Screw Base Sleeve Adapter Heavy Duty Stud Heater

SCB

Strip

3/4 2-1/2

SN WS SNH

Accessory

CTRH CBH

1 1

NH NS

3/4 3/4 1/2 1-1/8

NSL NSA SSNHM SSE SSEM AEPS A HSN HSW RHSW

Flexible Heaters — Section Outline

1-11/16 1-11/16

Section

Page

Overview

A-133 A-134 A-136 A-140

Explosion-Proof

Technical & Applications Selection Guidelines Ordering Guidelines

Ring

Disc

HSP MIS MSH

Mighty-Tuff Strip

Flexible Heaters — Selection Guidelines Type Description Model

Mica Strip

Page

Slicone Rubber

General Purpose Enclosure & Air

SL SL-N SL-B SLDH PHD PHDT

A-137 A-138 A-139 A-144 A-146 A-146 A-147

Band & Nozzle Heaters — Selection Guidelines

Silicone Rubber

Drum

Type

Size (In.)

Model

Heavy Duty Woven Drum Heaters with Thermostat

One-Piece Band

1-1/2 2-1/2 1-1/2

DB DBW MB-1 MB-2 HB AFH MTB CB

Thermal Insulation Drum

IBG

Two-Piece Band One-Piece/Mica Ins. Two-Piece/Mica Ins. Ceramic Band Aluma-Flex Band Mighty-Tuff Band

A-104

A-3

Components

Tubular Heaters Application Guidelines

Construction Chromalox tubular elements are used for prac- tically the entire range of electric resistance heating applications. A metal sheath material is selected. The proper size resistance wire for the heating element is carefully selected and verified by computer calculations to ensure the longest service life possible. The high quality resistor wire is carefully tested and inspected to meet rigid specifications prior to being coiled. The resistance wire is then welded to a terminal pin to assure positive connection. The wire is centered in a metal sheath and insulated with high quality magnesium oxide which is highly compacted around it and acts as an electri- cal insulator. This material readily conducts the heat from the coiled resistor to the metal sheath and puts the heat where it is required, which results in maximum heater life. The highly compacted magnesium oxide holds the terminal pin securely allowing maximum torque of eight inch pounds when tightening terminal hardware

In Moving Air — Compression fittings, factory mounted fittings or brackets will mount a tubular element in a duct or air heating chamber.

• Up to 172" Lengths (Std.) • 75 - 10,000 Watts (Std.) • 120, 240 and 480 Volt (Std.) • 3 - 53 W/In 2 (Std.) • Max. Sheath Temp. • Copper — 350°F • Steel — 750°F • Stainless Steel — 1200°F • INCOLOY ® — 1600°F Applications Extremely Versatile Heat Source — Highly adaptable, the tubular element, in its many forms and as a component of Chromalox packaged heaters and systems, has vastly increased the scale of electric heating applica- tions. The heaters' mechanical and electrical flexibility are important to process engineers and product designers alike, as heating requirements can be matched accurately by proper selection from a great variety of element lengths, sheaths, diameters and watt densities. Product Uniformity — Electric tubular heating elements provide a method of applying the exact amount of heat required at a specific area. When used with appropriate temperature control, product repeatability is assured. Increased Production — Adding heat to a process often leads to increased production. For example, drying time may be reduced by heating the air or the product being dried. Chemical and cleaning processes are often more efficient when heated and a more consis- tent finished product results. Less Down Time — Chromalox quality tubular elements with properly applied watt density and sheath material will provide long life, less down time and little or no maintenance.

In Moving Air

In Transferring Heat to Metal Parts - Dies, Molds, Platens — The available diameters, lengths, ratings, watt densities, cross-sec- tions, and maximum temperatures provide the solution for a given job.

Transferring Heat to Metal

Metal Sheath

Terminal Pin

Compacted Magnesium Oxide

Cold Length

Helically Coiled Resistor Wire

Typical Installations In Free Air — For applications like ovens and drying cabinets, tubular elements are com- pact, rugged heat sources. Their formability permits fitting around other oven components and work protrusions, concentrating heat at any point. In Free Air

In Liquids — Tubular elements listed may be mounted through the side wall of a tank with compression fittings or by factory mounted fittings.

In Liquids

A-4

Components

Tubular Heaters Application Guidelines (cont’d.) Liquid Heating Direct Immersion — Water and water solu- tions can generally be heated to any desired temperature. If liquid is under pressure, temperatures should not exceed the maximum sheath temperature of the element minus 100°F. Note — Heated section of element must be immersed at all times when energized. Longer cold ends can be provided, if required. Threaded fittings are available for mounting through tank walls. Oil Heating Steel sheath elements can be used for heating oils, heat transfer oils and other solutions not Use watt densities compatible with work temperatures. Refer to Technical section of this catalog. Heaters mounted horizontally must be supported to avoid sagging at high temperatures. Proper spacing of supports may vary with application temperature, element diameter and sheath material. Generally 12 to 18" spacing of supports is adequate. Max. Sheath Temperatures To assure maximum life, tubular elements should not be operated beyond the tempera- tures in this tabulation: corrosive to steel sheath. Air & Gas Heating

TUBULAR

Where air flowing over elements permits use of higher watt densities, make sure air flow is evenly distributed. Allow approximately 1/8" per foot of element length for expansion and contraction of ele- ments (i.e., 24" long element could expand 1/4" when energized). Clamp-On Heating Use watt densities compatible with work temperatures. Refer to Application Guide for Tubular Heating of Solids, Liquids, Air & Gas or use curve G-175S in Technical section. Heaters should be clamped tightly for good heat transfer but should be allowed to expand as they heat up. Heaters clamped too tightly will bow away from the heated surface which results in poor heating efficiency and possible heater failure. It is generally best to tighten the middle clamp first to hold the element. Other clamps should be tightened enough to hold, but back off 1/2 turn to allow for expansion and contraction. Heaters should be spaced on approximately two inch centers minimum. Heaters are commonly installed by clamping into machined grooves for better heat transfer.

Note — Depth of groove should never exceed element diameter to assure positive clamping. Grooves should be machined to the following tolerences:

Clamp-On Heating

Element Dia. Less

0.003 0.015

0.008 0.010

WARNING — When insulation is used over elements, an air space must be provided be- tween the elements and insulation. Insulation should never be in direct contact with heated section of elements. Application Engineering Is available from direct sales and engineering representatives. The largest, most experienced organization of field engineers in the country is ready to help solve any heating problem. Contact your Local Chromalox Sales office. (See back of catalog.)

Tubular Heating Application Guidelines

Temperature Desired (°F)

Work Temperature (°F) Up to 300 Up to 500 Up to 800 Up to 1000 Up to 1200 Up to 1400

Allowable Watt Density (W/In 2 )

Product To Be Heated

Suggested Application

Sheath Material

Solids Molds, Platens, Dies, Pipes, Tanks

Up to 1400 Clamp-On INCOLOY ®

30 20 15 10 7 2.5

Liquids Water, Clean

Max. Allowable Sheath Temp. (°F)

Up to 250 Up to 550 Up to 200 Up to 200

Immersion Immersion Immersion Immersion

Copper INCOLOY ® 304SS INCOLOY ®

250 550 200 200

Up to 80 2 40

Sheath Material

Copper Steel MONEL ®

350 750 900 1200 1600 1600

Water Solutions, Mild Corrosion 1 , Corrosive 1 Oil Low Viscosity Med. Viscosity High Viscosity Air & Gases Moving, 9'/sec Velocity

50 50

Stainless Steel INCOLOY ® INCONEL ®

Up to 180 Immersion

Steel

Up to 180

23 15 6.5 40 32 25 15 2 30 20 10 2

Metric Diameter Equivalents

Up to 1500 In Ducts

INCOLOY ®

500 800 1000 1200 1500 700 1000 1200 1500

Inches (±0.005)

Millimeter

0.5 0.475 0.43 0.375 0.315 0.26 0.246 0.2

12.7 12.07 10.92 9.53

Still

Up to 1500

Ovens

INCOLOY ®

8

6.6 6.25 5.08

1. See Corrosion Guide in Technical section.

2.VDE - 50 W/In 2 max.

A-5

COMPONENTS

TubularHeaters Design & Installation Guidelines Design Considerations

Terminal Selection — Stocked tubulars are shipped with standard terminals, see Terminal Options in this section. Many other terminals and terminal end seals are available made to order. CAUTION — Protect terminals from possible contamination from surrounding atmospheres such as oil fumes, chemical vapors from other processes, moisture, weather, etc. MgO insula- tion is hygroscopic. Vacuums — Tubular heaters operate at higher temperatures in a vacuum because there is no air to take away the heat. Therefore, watt densities are recommended to be 20 to 30% lower. It is recommended terminals of the element be kept outside of the vacuum. Code Compliance — Chromalox manufac- tures the highest quality heaters and con- trols and, where applicable, in compliance with such codes as the Canadian Standards Association (CSA), Underwriters Laborato- ries Inc. (UL) and Verification of Devices for Europe Testing and Certification Institute (VDE) and CE. Installation Guidelines Wiring — Must be in accordance with The Na- tional Electrical Code (NEC). It is important to use the correct wire gauge to carry the amperage required. A wire not large enough can overheat, become brittle and break. The ambient tempera- ture must also be considered in choosing the correct type of wire and insulation. Make sure wiring to terminals is tight. Keep terminals away from heat, if possible. (For higher temperatures, contact your Local Chromalox Sales office.) Mounting Methods— Elements can be supplied with threaded fittings for mounting thru walls of tanks, ovens, etc. Compression threaded fit- tings are also available for easy field installation. Rings, clips, brackets and washers can also be attached to elements for mounting purposes.

Easy Bending — To put heat where it is needed, tubular elements can be bent to fit most require- ments. See following pages for customer bend- ing and factory bending details. Bending should be done around a smooth round object such as a piece of pipe. For minimum bending radii, see Bending Guidelines. Triangular Cross-Section These unique cross-sectioned elements are specially designed for high element surface temperature applications, and wherever extreme rigidity is required. Triangulation — A patented extra step by Chromalox to increase insulation density and maximize heat transfer and operating life. This method of compaction increases uniformity of resistance wire spacing to help eliminate hot and cold spots. It also increases the rigidity of the element, which is an advantage in some applications. The terminal ends of these elements are re- rounded to facilitate the use of threaded fittings or other mounting methods. The heart shaped cross-section is recommended for certain heavy duty applications. It has added structural strength, achieved through die press- ing, which resists deform-ation or sagging when installed in the flow of high velocity air or thick oils and compounds, or in high surface temperature air heating.

Sheath Material — For resisting corrosion inherent in the process or environment and for withstanding the sheath temperature required— Standard sheath materials are INCOLOY ® , steel, copper and stainless steel (type 304). Other types of stainless steel, MONEL ® , titanium and INCONEL ® are available. Job Requirements — The calculation of total heat requirements for an application is outlined in Technical section. For assistance, contact your Local Chromalox field sales engineer who will be glad to contribute his judgement, experience and knowledge in solving your heating problem. After the specific heater size and rating has been tentatively selected, the watt density must be checked against the curves in Technical section. If the heater selected has a watt density higher than stipulated by the curve, consider these alternatives: 1. Use more heaters of a lower watt density to obtain the required kW capacity. 2. Reduce the kW capacity needed by reducing heat losses and/or allowing for a longer heat-up time. Watt Densities — The watt density of the element, or watts per square inch of element heated area, should be low for heating asphalt, molasses and other thick substances with low heat transferability. It can be higher for heating air, metals, liquids and other heat-conducting materials. See curves in Technical section for determining allowable watt densities. When high operating temperatures are needed, watt density must be limited in order not to exceed the maximum sheath temperature. Watt density is given in the specifications for each tubular heater. In general, a viscous material with low thermal conductivity requires a low watt density. Higher watt densities can be used with thinner liquids and with materials of high thermal conductivity. Premature loss of the element due to excessive temperature may result if the material’s heat- take-away ability is low. Also, the material may be charred, carbonized or its chemical makeup altered by overheating.

A

Heated Length B

G

G

E

E

F

F

D

Terminal Size

C

Insulation

Dimensions (In.)

Terminal Size #10-32 #10-32

A B C D E

F

G

Sheath Material

Copper

1 1 3/8 21/64 3-3/8 1-1/2 1±1/16 1 1 3/8 21/64 3-3/8 1-1/2 1±1/16 1 1 1/2 15/32 3-7/16 2-1/2 13/16±1/16 #8-32

Steel or INCOLOY ® Copper, Steel or INCOLOY ®

1. See complete heater dimensions in table on product pages.

A-6

COMPONENTS

TubularHeaters Modifications

Repressed Bends — Tubulars can be bent to tighter radii at the factory. Bends are then repressed to ensure re-compaction of insula- tion for long life. Customer bending on larger radii does not require repressing. (See Factory Bending Guidelines in this section). Sheath Length — Larger diameter heaters can be made in unspliced lengths up to 40 feet. This eliminates the need for a spliced joint which is always a possible weak point that might cause premature heater failure.

TUBULAR

World Leader in the Manufacture of Electric Heating Elements — Chromalox offers the most complete line of tubular heaters available. Standard diameters are: Cross-Section Views Standard Diameters

In addition, titanium and other 300 series stain- less steel sheaths are available upon request. For applications requiring other materials, contact your Local Chromalox Sales office. Cold Section — Longer cold ends can be sup- plied, as required, up to 20 inches. For longer cold ends, contact your Local Chromalox Sales office. Factory Bending — Tighter bends can be made at the factory. Tubular heaters can be formed to many different shapes to suit your application. This is done by specially designed bending tools and repressing dies for bending on many different radii. Additional Features— Many additional features are available for the difficult jobs which require custom designed elements employing Chro- malox's vast engineering experience.

} } }

0.2 0.246 0.260 0.315 0.375 0.43 0.475

Round

Max. Heater Length (Ft. ± 1%)

Element Dia. (In.)

Triangular (heart shape)

3/8” 1/2”

0.2

10 30 30 30 40 40

0.246 0.315 0.375

3/8” 7/16”

Flat Pressed

0.43

0.475

Round Cross Section— Highly adaptable where elements must be bent —particularly if bending is performed in the field. Triangular Cross Section — Patented process produces elements with the closest possible dimensional control. Triangulated Cross Section — Flat pressed. Patented process provides large contact area for clamp-on applications. This means more ef- ficient heat transfer, fewer elements since higher element ratings may be employed. Voltage or Wattage — Heaters can be made for operation on any voltage and rated at any wattage suitable for the application within practical limits. For voltages higher than 480V, specify high voltage terminal construction. See Component section Tubular Heater (0.475 or 1/2" diameter only). Special Wattage Distribution — Heaters can be made with higher wattages toward the end of the heated section to help offset losses in certain applications. Check with your Local Chromalox Sales office for additional information. Tubing — Standard industrial grade wall thick- ness:

3/8 1/2

17±1/8" 17±1/8

Single Ended

10

Threaded Fittings

Terminal Construction — Many choices to suit your application. Tubular elements generally have a terminal for electrical connection at each end. Single end construction has both terminals at the same end. UL and CSA — Chromalox tubular heaters can be furnished as UL Recognized and CSA Certified components with the addition of a terminal end seal. Terminal end seals can be added to stock elements and shipped in one week. (UL File E198480, Guide UBJY2, CSA File 40859). Use “end seal/moisture barrier” in place of end seal. VDE and CE — Chromalox tubular heaters can be furnished as VDE Certified and CE certified. Contact your Local Chromalox Sales office. Wide Choice of Sheath Materials — Available to meet a wide variety of applications. Standard sheath materials are: INCOLOY ® , steel, type 304 and 316 stainless steel, copper, INCONEL ® and MONEL ® .

Nickel Plated Steel Washer

A

Gasket Washer

Welded or Brazed Ring

B

Max. Wall Thickness (In.)

Dimensions (In.) A B

Element Dia. (In.) 0.246 0.315 3/8 1/2-0.475 0.246 0.315 3/8 1/2-0.475 0.246 0.315 3/8 1/2-0.475

Fitting Material

Mtg. Hole Dia. (In.)

Thrd. Size F 3/8 - 24 7/16 - 28 1/2 - 28 5/8 - 24 3/8 - 24 7/16 - 28 1/2 - 28 5/8 - 24 3/8 - 24 7/16 - 28 1/2 - 28 5/8 - 24

Brass Brass Brass Brass Steel Steel Steel Steel

13/32 15/32 17/32 21/32 13/32 15/32 17/32 21/32 13/32 15/32 17/32 21/32

7/32 5/16 5/16 5/16 7/32 5/16 5/16 5/16 7/32 5/16 5/16 5/16

15/32 13/16 13/16 13/16 15/32 13/16 13/16 13/16 15/32 13/16 13/16 13/16

7/8 7/8 7/8 1 7/8 7/8 7/8 1 7/8 7/8 7/8 1

Stainless Steel Stainless Steel Stainless Steel Stainless Steel

A-7

COMPONENTS

Tubular Heaters Factory Bending Guidelines

Figure 1

Figure 2

B

Dia.

A

Dia.

R

A

R

L

L

Note — OAL represents overall length.

OAL = 2L + 1.14R - 0.43" Dia.

OAL = 2L - 0.86R - 1.43" Dia. + A

Figure 3

Figure 4

Dia.

R 1

R 1

A

Dia.

R 2

B 1

A

L

B 2

R 1

R 2

C

B

H

L 1

L 2

OAL = 2H - 0.86R 2 - 2.86" Dia. + 2A + 1.14R 1

OAL = 2L 2 + 1.14R 1 - 1.29" Dia. + 2L 1 + 1.14R 2

Factory Minimum Bends for Tubular Heaters Element Dia. & Sheath Inside R 1,2,3

Dimensions (In.) 1

A

B 1,2

C

Inside D

E 8 6 8 6 8 6 5 3 5 3 5 3 5 3 5 3

3/4 1/2 3/4 1/2

1-3/8 1-3/8 1-3/8 1-3/8 1-3/8 1-3/8 1-3/16 1-3/16 1-3/16 1-3/16 1-3/16 1-3/16 1-1/8 1-1/8 1-1/16 1-1/16

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1-1/2 1-1/2 1-1/2 1-1/2

5 8 3 3 3 3

1/2" INCOLOY ® 5 Steel & Copper 0.475" INCOLOY ® Steel & Copper 0.430" INCOLOY ® Steel & Copper 3/8" INCOLOY ® 5 Steel & Copper 0.375" INCOLOY ® Steel & Copper 0.315" INCOLOY ® Steel & Copper 0.260" INCOLOY ® Steel & Copper 0.245" INCOLOY ® Steel & Copper 0.200" INCOLOY ®

7/16 7/16 9/16 3/8 3/8 3/8 9/16 5/16 1/4 1/4 3/8 1/4

1 1

1-1/2 1-1/2

3-3/4 6 2-5/8 2-5/8 1-7/8 1-7/8 1-1/2 1-1/2 1-1/4 2 2

1 1

1-1/2 1-1/2

1 1

1-3/16 1-3/16

1/4 5 To Order — Specify model, PCN, volts, watts, special features, if required, and quantity. Specify for Factory Formed Tubulars: A. Figure number. B. A, B 1,2 , C, D, E, H, J, K, L 1,2 and R 1,2,3 dimension as required. C. N - number of turns, Dia. - Element Diameter- aid < - angle as required. D. Material for threaded fittings. E. Special terminal type. F. Position of crown (flat side) of element (TC, TI, TS only). G. Submit sketch with special details. Notes — 1. These are general guidelines only. Special dimensions and configurations are possible. Contact your Local Chromalox Sales office. 2. A dimension can be less if no fittings are required. 3. C dimension may need to be greater if special fittings are used. 4. E dimension is a minimum when R dimension is less than customer minimum bending radius. 5. Heart Shaped cross-section only. 1/4 3/4

A-8

COMPONENTS

TubularHeaters Factory Bending Guidelines (cont’d.)

TUBULAR

Figure 5

Figure 7

Figure 6

L 1

R 1

R 3

Dia.

Dia.

R 2

R 1

R 4

B 1

Dia.

R 1

H

R 2

R 2

R 2 B 2

B 1

A

A

B

R 1

A

H

C

R 4

R 3

R 3

I

R 1

B 2

C

C

B

R 1

H

L 2

L 1

X = No. Outside Hairpins

I

R 1

L 1

L 2

L 3

L 2

OAL = 2H + 0.86R 3 - 0.86R 4 - 6.15Dia. + 2I + 2L 1 + 2.28R 1 + 1.14R 2

OAL = 2L 2 + 2H + 2I + 2L 3 (X-1) - 0.86R 3 - 0.86R 4 - 4.86Dia. + 1.14R 1 (X) + 1.14R 2 (X-1) - (2X-1)0.43Dia.

OAL = 2H + 0.86R 3 - 3.72Dia. + 2L 1 + 2L 2 + 2.28R 1 + 1.14R 2

Figure 10

Figure 8

Figure 9

R 1

A

Dia.

A

R

L

Dia.

E

J

L 2

R

A

< .

B 2

D

R 2

B

B 1

B

L 1

OAL = 2L 1 + 2.28R 2 - 1.29Dia. + 2L 2 + 1.14R 1

OAL = 2L + 3.42R - 1.29Dia. + 2E

OAL = 0.0175(< . )(2D/2 + Dia.) + 1.14R + 0.43Dia.

Figure 11

Figure 12

Figure 13

Dia.

H

K

Dia.

C

D

J

L

C

A

D

R

D

C

R

Dia.

A

OAL = [(D + Dia.)(3.14)(Number of 360°’s)] + 2C

OAL = (D + Dia.)3.14 + 1.14R + 2C + 3.71Dia. - A

OAL = (D + Dia.)3.14 + 1.14R + 2H + 3.28Dia. - A

Figure 14

Figure 15

Figure 16

K

A

L 1

J

C

R 2

I

R 2

R 1

C

L 1

H

L 2

C A

View A

View B

B 1

B 1

Dia.

Dia.

B 2

Dia.

R 1

H

D

D

Dia.

L 2 B 2

A

A

OAL = 2H + 2L 2 + 2L 1 - A - 1.72R 1 - 0.86R 2 - 6.29Dia.

OAL = [(D + Dia.)(3.14)(No. 360°’s)] + (D/2) + K + C

OAL = 2L 2 + 2H - A - 2.28R 1 - 0.86R 2 - 3.29Dia.

A-9

A-9

COMPONENTS

TubularHeaters Terminal Options Standard, Alternate and Moisture Resistant Terminals

Sheath Dia.

Sheath Dia.

Max. Volts

Max. Volts

Type

Description

(In.)

Type

Description

(In.)

Standard Terminals 3

28

0.315 0.375 0.43 0.475

480 480 480 480

0.246 0.25 0.26

240 240 240

1/4

Mica

1/4

3/

Mica

3/

1

Sheath Dia. Per Tab 1

Sheath Dia. Per Tab

Welded on threaded pin (#10-32), nut and washer

Welded on threaded pin (#8-32), nut and washer

4

34

0.43 0.475

480 480 480

0.2

240

Mica

1/4

0.5

Sheath Dia. Per Tab

Sheath Dia. Per Tab

1/

Threaded terminal pin (#8-32), nut and washer

Leadwire with sleeving, #6 Connector

8

STRI / STRS/ STRC

0.246 0.25 0.26 0.315 0.375 0.43 0.475

240 240 240 240 240 240 240

0.315 0.475

240 480

1

Sheath Dia. Per Tab

1/4

1/

3/4

Terminal connector - 5/16" long, #10-32 machine screw

Single-end tubular termination, 10" leadwire

Alternate Terminals 23

30

0.43 0.475

600 600 600

All

240

Sheath Dia. Per Tab

1/4

1/

0.5

Mica

1/

Sheath Dia. Per Tab

3/4

Threaded terminal pin (#8-32), nut and washer

Ark-Les R Connector

24

30R

0.43 0.475

600 600 600

All

240

1/4

1/4 Sheath Dia. Per Tab

Mica

0.5

3/4

1/

13/1

/1

Threaded terminal pin (#8-32), nut and washer

Right-angle Ark-Les R Connector

25

37

0.246 0.25 0.26 0.315 0.375 0.43 0.475

240 240 240 240 240 240 240

0.315 0.375 0.43 0.475

240 240 480 480

3/4

11/3

3/4

1

1/4

3/

Sheath Dia. Per Tab

3/4

.43

.4

.31 .3

1/4

Extra mechanical strength # 8-32 thread

5/16" Long #10-32 Bolt with nut

A-10

COMPONENTS

TubularHeaters Terminal Options (cont’d.)

TUBULAR

Standard, Alternate and Moisture Resistant Terminals

Sheath Dia.

Sheath Dia.

Max. Volts

Max. Volts

Type

Description

(In.)

Type

Description

(In.)

Alternate Terminals (cont.d) 38 Dia. (In.)

48

0.315 0.375 0.43 0.475

480 480 480 480

0.246 0.25 0.26 0.315 0.375 0.43 0.475

240 240 240 240 240 240 240

A

7/8

1/4

0.315 0.375

3/8 1/2

5/16

0.43, 0.475

9/16

Sheath Dia. Per Tab

Sheath Dia. Per Tab

A

Narrow profile terminal connector , 5/16" Long #10-32 or #8-32 machine screw .

1-5/8

Leadwire type terminal

47-L

49/50

0.315 0.375 0.43 0.475

480 480 480 480

0.315 0.43 0.475

480 480 480 480

Ceramic Spacer

7/8

0.5

13/32

Silicone Bushing

1-3/4

1/2

7/16

12

Silicone bushing/ceramic disc seal , epoxy/RTV/silicone resin can be placed under bushing (type 49, #8-32 thread/ type 50, #10-32 thread)

105°C leadwire, silicone sleeving

47-M

53

0.315 0.375 0.43 0.475

480 480 480 480

0.315 0.375 0.43 0.475

480 480 480 480

#10-32

Sheath Dia. Per Tab

1-3/4

1/2

Ceramic Bushing

12

1-1/8

200°C leadwire, silicone sleeving

Air set cement, >700˚F temp

39/40 Moisture Resistant Terminals Note: Type 26 is the only Hermetic Seal, all others are Barriers. 13 0.246 240 0.25 240 0.26 240 0.315 300 0.375 480 0.43 480 0.475 480 0.5 550 2 3/4 0.315" Dia. and Smaller 1-3/4 15/32

0.43 0.475

480 480 480

13/16

1/4 5/16

1/4

0.5

#8-32 Ceramic Bushing

Sheath Dia. Per Tab

0.375" Dia. and Larger

Epoxy, 194°F max. temp., (type 39) RTV, 350°F max. temp., (type 40)

EPDM rubber vulcanized to sheath and leadwire, max. temp. 220˚F

26

42

0.315 0.375 0.43 0.475

240 480 480 480 480

0.475

480

Sheath Dia. Per Tab

#10-32

Silicone Rubber Boot

1-7/8

Sheath Dia. Per Tab

1-7/8

1/4-28

0.5

0.375" Dia. and Smaller

16 Gauge Lead Wire

1/2

0.43" Dia. and Larger

2-1/8

14

Silicone rubber boot potted with RTV sealant, 0.475" dia. single-end only

Hermetic seal, 1000˚F max. element temp.

39/40

V VP A

0.315 0.375 0.43

480 480 480

0.26 to 0.475

480

V Seal (284˚F) V Seal Plus (392˚F) A Seal (Sheath Limit)

13/32 #10-32

1/4

Sheath Dia. Per Tab

RX Seal (600˚F) G Seal (1100˚F)

Ceramic Bushing

1

Epoxy, 194°F max. temp., (type 39) RTV, 350°F max. temp., (type 40)

A-11

COMPONENTS

TubularHeaters Customer Bending & Accessories

Customer Bending Simple element configurations can be made easily in the field from stocked tubulars listed in this catalog. If copper or stainless sheaths are selected, specify “To be fully annealed for bending.” Elements can be bent around any round, smooth surface of the right diameter. Three precuations should be observed to prevent damage to the element: 1. Radius of the round object, around which the element is bent, should be no smaller than the minimum radius for the element, as shown in the table below. 2. Sharp edges of tools should not be permitted to gouge the element sheath while bending. 3. End of cold section of the element should not fall within the bend nor come within 1/4" of either side of the bend. To locate end of cold

section, see dimensions for the element on its catalog page and determine as follows: Example — To locate end of cold section of TRI-1645 tubular element, refer to the indi- vidual product page. Sheath length: 16" Less heated length: 9-1/8" Total cold length: 6-7/8" Cold length of each end (6-7/8" ÷ 2) = 3-7/16" Terminal end bending can be done with pipe section of slightly larger diameter than sheath. A minimum 1" straight section should be left at the end. Note — To protect sheath, copper sheet can be bolted to vise jaws and end of pipe can be filed to remove sharp edge. Before bending, it is best to lay out and dimen- sion the configuration. Also, it is best to start bending from the center of the heater and work toward the terminal ends.

Brackets, Discs & Clips Brackets, Discs and Clips — Various types of brackets and clips can be fastened to the heaters to facilitate installation. The following are typical. For other brackets to meet your installation requirements, contact your Local Chromalox Sales office.

4-1/2" 3-3/8"

4-1/2" 3-3/8"

3/4"

3/4"

1-15/16" 31/32"

1-15/16" 31/32"

1-1/2"

1-7/16"

Flange - Support 0.315" Element

Flange - Support 0.475" Element

Customer Bending — Min. Inside Radius (In.)

Sheath Material

Degree of Bend 1/2" 0.475" 0.430"

3/8"

0.375" 0.315" 0.26" 0.246"

0.2"

7/16"

Copper 90

3-1/2 3-1/2 2-1/2 2-1/2 2-1/2 2-1/2

1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2

1-5/16 1-5/16 1-5/16 1-5/16 1-5/16 1-5/16

2-5/16 2-5/16 1-7/8 1-7/8 1-7/8 1-7/8

1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8

15/16 15/16 15/16 15/16 15/16 15/16

7/8 7/8 7/8 7/8 7/8 7/8

3/4 3/4 3/4 3/4 3/4 3/4

Not Std. Mat. in this Dia.

180 90 180 180

Steel

1-1/2" O.D.

Alloy 90

5/8 5/8 1. For radii smaller than shown, special processing is required to achieve good life qualities. Contact your Local Chromalox Sales office.

Elements are on 1" Dia. Bolt Circle

5/32"

Disc

Clip-Anchor

Compression Fittings Field Installed Compression Fittings — For 0.475, 0.315 and 0.246" diameter elements . Available in both brass and steel, these fittings have been tested to 600 psi hydrostatic pres- sures and may be used in tank walls for liquid immersion as well as in air ducts and a variety of other applications. Compression fittings do not require brazing and can be field mounted in minutes. They may be positioned anywhere along the cold section of the heating element. Do not position over heated section. Cannot be installed over terminal Type #26 (Hermetic Seal), and some other terminals wider than sheath diameter.

Leave 1" Min. Straight Section at Terminal End

1/4

1/4

R

End of Heated Section Must Not Be Within These Two Points

Terminal End

Bending

Dimensions (In.)

Thread Size

Assembled Overall Length

Tank Wall Gasket

Compression Nut

Elem. Dia.

Mtg. Hole Dia.

Max. Wall Thickness

Hex Nut

F

G

PCN

Material 1

Fitting

Brass Brass Brass Steel Steel Steel

0.246 0.315 0.475 0.246 0.315 0.475

13/32 15/32 21/32 13/32 15/32 21/32

7/32 5/16 5/16 7/32 5/16 5/16

1-7/16 1-1/2 2 1-3/4 1-3/4 2-1/8

3/8-24 7/16-28 5/8-24 3/8-24 7/16-28 5/8-24

1/2-24 1/2-24 3/4-24 1/2-24 1/2-24 3/4-24

144151 144143 144135

143474 143466 143458 To Order— Specify PCN, material, element diameter and quantity. Available in pairs only. 1. Available only in brass and steel at this time.

Ferrule

Thread F Thread G

Compression Fittings for 0.475, 0.315 and 0.246" Diameter Elements for Installation in the Field. Washer

A-12

COMPONENTS

TEH Tubular Enclosure and Switchgear Heaters • Several Standard Models in Stock • UL and CSA Component Recognized • Optional Adjustable Ambient Thermostat 0-107°F (-18 to 42°C) • Custom Designs Available

TUBULAR

3-1/2” (89.1)

8-9/16” (216.9)

1-1/2” (38.1)

1-1/4” (31.8)

Description Type TEH Tubular Enclosure Heaters and Gen- eral Purpose Air Heaters are used for freeze protection and condensate protection in electri- cal enclosures and switchgear. They can also be installed in equipment to keep mechanical components functioning in applications such as valve enclosures and line metering. Applications Freeze or condensate protection in enclosures containing mechanical and electronic equipment, such as: temperature control panels, control valve housings, ATMs, traffic signal boxes, and line metering enclosures.

Features • Element construction features Nichrome A resistance wire, high grade MgO and INCOLOY sheath to ensure long life • Moisture resistant terminal seal • Standard Wattages to 400 watts, higher cus- tom wattages available • Multiple enclosure configurations for versatile mounting • Optional ambient sensing adjustable thermo- stat • Standard 8-32 Screw terminals or 1/4” Quick Disconnect for lead wire connection • Galvanized sheet metal cover to prevent cor- rosion • Optional terminal cover to prevent incidental contact

A-1

COMPONENTS

TEH Tubular Enclosure

and Switchgear Heaters (cont’d.) Determining Minimum Recommended Wattage

Total Surface Area Ft 2 (m 2 )

˚F/˚C Above Ambient

2 (0.19)

3 (0.28)

4 (0.37)

5 (0.46)

6 (0.56)

7.5 (0.7)

9 (0.84)

10 (0.93)

15 (1.39)

20 (1.86)

25 (2.32)

30 (2.79)

40 (3.72)

50 (4.65)

Uninsulated Enclosures

20 40 60

30 55

40

55

70

80

100 120 135 205 270 335 405 540 670

80 110 135 160 200 245 270 405 540 670 805 1,075 1,340 90 120 160 205 245 300 365 405 605 805 1,005 1,210 1,610 2,010 80 110 160 215 270 325 400 485 540 805 1,075 1,340 1,610 2,145 2,680 100 135 200 270 335 405 500 605 670 1,005 1,340 1,675 2,010 2,680 3,350 120 165 240 320 405 485 600 725 805 1,210 1,610 2,010 2,415 3,220 4,020 140 190 280 375 470 565 700 845 940 1,410 1,880 2,345 2,815 3,775 4,690 Insulated Enclosures 20 10 10 15 20 20 25 30 35 50 65 80 100 130 160 40 15 20 30 35 40 50 60 65 100 130 160 195 260 320 60 20 30 55 50 60 75 90 100 145 195 240 290 385 480 80 30 40 55 65 80 100 115 130 195 260 320 320 515 640 100 35 50 65 80 100 125 145 160 240 320 400 400 640 800 120 40 60 80 100 115 150 175 195 290 385 480 480 770 960 140 45 70 90 115 135 175 205 225 340 450 560 560 900 1,120

Stock Parts list

Without Thermostat

With Thermostat

Volts Watts Model 120 100 058616 TEH-A-100W-120V-O-O-O-D 058739 TEH-A-100W-120V-O-O-A-T 240 100 058624 TEH-A-100W-240V-O-O-O-D 058747 TEH-A-100W-240V-O-O-A-T 120 150 058632 TEH-A-150W-120V-O-O-O-D 058755 TEH-A-150W-120V-O-O-A-T 240 150 058640 TEH-A-150W-240V-O-O-O-D 058763 TEH-A-150W-240V-O-O-A-T 120 250 058659 TEH-A-250W-120V-O-O-O-D 058771 TEH-A-250W-120V-O-O-A-T 240 250 058667 TEH-A-250W-240V-O-O-O-D 058780 TEH-A-250W-240V-O-O-A-T 120 300 058675 TEH-A-300W-120V-O-O-O-D 058798 TEH-A-300W-120V-O-O-A-T 240 300 058683 TEH-A-300W-240V-O-O-O-D 058800 TEH-A-300W-240V-O-O-A-T 120 350 058691 TEH-A-350W-120V-O-O-O-D 058819 TEH-A-350W-120V-O-O-A-T 240 350 058704 TEH-A-350W-240V-O-O-O-T 058827 TEH-A-350W-240V-O-O-A-T 120 400 058712 TEH-A-400W-120V-O-O-O-T 058835 TEH-A-400W-120V-O-O-A-T 240 400 058720 TEH-A-400W-240V-O-O-O-T 058843 TEH-A-400W-240V-O-O-A-T Notes: 1.8-32 Screw Terminals are Standard on Stock Parts 2.Type "A" Enclosure Standard on Stock Parts 3. Models "With Thermostat" include 0-107°F (-18 to 42°C) adjustable ambient thermostat. PCN Model PCN

A-2

COMPONENTS

TEH Tubular Enclosure and Switchgear Heaters (cont’d.) Notes: 1.Enclosure type “C” includes mounting bracket option “S”. 2.Heaters with enclosure type "D" are designed to be mounted on top of those with enclosure type "C". See instructions for details. 3.Standard models available in 25 W increments up to 400W max. 4.Thermostat option only available with type A enclosure. 5. For custom designs, including voltages, watt- ages, and configurations with preset thermostats. contact sales.

Model TEH

Code Enclosure Type A

Base with U-Shaped Mounting Base with L-Shaped Mounting Base with Mounting Brackets

B C D

TUBULAR

Top Code Power (Watts) XXXW

Code Voltage (Volts) 24 24 V

120 120 V 208 208 V 240 240 V

Code Terminal Cover O None T Included

Code Mounting Brackets O None S Included (See note 1) Code Thermostat O None A Adjustable P Preset

Code Terminal Type T

8-32 Terminals (Std.) 1/4" Quick Disconnect

D

TEH- A- 200W- 120V- T-

S-

A-

T Typical Model Number

Terminal Configurations

Element Closure Configurations

8-32 Screw Terminals

1/4" Quick Connect

Type A

Type B

Terminal Cover

Type D

Type C

Type A with Thermostat

*See specification data sheet for full dimensions (SDS- PB301)

A-3

Components

TRI .475" Dia. Round Cross-Section • INCOLOY ® Sheath • 450 - 4,750 Watts • 120 and 240 Volt • 30 W/In 2 • 1600°F Max. Sheath Temp.

TUBULAR

Dimensions

13/16

A ± 1%

13/16

B

0.475" Dia. INCOLOY ® Sheath

All Dimensions in Inches

Features Type 4 Terminals — Standard. Integral parts of the element are of high strength to resist bending during tightening of the wiring con- nections. Type 4 is threaded extension of the cold pin. See terminal detail drawing in the Tubular Heater Overview section. Work Temperatures — See Tubular Heater Overview section. Bending — Customer’s minimum inside bending radius is 1-1/2". See bending require -ments in the Tubular Heater Overview section.

Applications Versatile tubular elements can be designed for use in most applications. See guidelines in the Tubular Heater Overview section. Advantages The metal sheath isolates and protects the re- sistor wire from the environment. At the same time, it maximizes heat transfer capability to the work. Tubular elements can be bent to put the heat where it works best.

Specifications and Ordering Information

Dimensions (In.)

INCOLOY ® Sheath

Sheath

Wt. (Lbs.)

Watts

Volts 120 120 120 120 240 240 240 120 240 240 240 240 240 120 240 240 240 240 240 240 120 240 240 240 240 240 240 240 240 240

W/In 2

A Heated B

Model

Stock

PCN

450 540 635 750 750 825 900

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

16 18 20 23 23 25 27 28 28 30 32 34 36 40 40 58 60 60 66 70 74 78 85

9-1/8 11-1/8 13-1/8 16-1/8 16-1/8 18-1/8 20-1/8 21-1/8 21-1/8 23-1/8 25-1/8 27-1/8 29-1/8 33-1/8 33-1/8 37-1/8 39-1/8 43-1/8 47-3/8

TRI-1645 TRI-1845 TRI-2045 TRI-2345 TRI-2345 TRI-2545 TRI-2745 TRI-2845 TRI-2845 TRI-3045 TRI-3245 TRI-3445 TRI-3645 TRI-4045 TRI-4045 TRI-4445 TRI-4645 TRI-5045 TRI-5445 TRI-5845 TRI-6045 TRI-6045 TRI-6645 TRI-7045 TRI-7445 TRI-7845 TRI-8545 TRI-10045 TRI-10845 TRI-11245

NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS

281316 281324 281332 281340 281359 281367 281375 175716 281383 281391 281404 281412 281420 175724 281439 281447 281455 281463 281471 281244 175732 281252 281260 281279 281287 281295 281308 281480 281498 281500

0.5 0.5 0.5 0.5 0.5 0.7 0.9 1 1 1 1.1 1.1 1.2 1.3 1.3 1.4 1.6 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2.3 3.3 3.3 3.3

1,000 1,000 1,100 1,200 1,275 1,350 1,500 1,500 1,725 1,800 1,950 2,000 2,250 2,500 2,500 2,750 3,000 3,125 3,250 3,500 4,000 4,500 4,750

44 46 50 54-1/4

51 53 53 59 63 67 71 78

100 108 112

93 101 105

Stock Status: S = stock NS = non-stock To Order— Specify model, PCN, watts, volts and quantity.

A-13

Components

TRID & TRIW .475" Dia. Round Cross-Section • INCOLOY ® Sheath • 1,000 - 7,500 Watts • 120, 240 and 480 Volt • 19 and 22 W/In 2 (type TRID) • 40 W/In 2 (type TRIW) • 1600°F Max. Sheath Temp. Applications Versatile tubular elements can be designed for use in most applications. See guidelines in the Tubular Heater Overview section. Advantages The metal sheath isolates and protects the resistor wire from the environment. At the same time it maximizes heat transfer capability to the work. Tubular elements can be bent to put the heat where it works best. Features Type 4 Terminals — Standard. Integral parts of the element are of high strength to resist bending during tightening of the wiring con- nections. Type 4 is threaded extension of the cold pin. See terminal detail drawing in the

Dimensions

13/16

13/16

A ± 1%

B

0.475" Dia. INCOLOY ® Sheath

All Dimensions in Inches

Specifications and Ordering Information

Dimensions (In.)

INCOLOY ® Sheath

Wt. (Lbs.)

Watts Volts W/In 2

Sheath A Heated B

Model

Stock

PCN

TRID — 22 W/In 2 1,000 1,000 1,250 1,250 240 480 240 480

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 19 19 19 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

40 40

28-1/8 28-1/8 31-11/16 31-11/16 42-3/8 42-3/8 58-1/8 58-1/8 73-1/8 73-1/8 88-1/8 88-1/8 96-1/8 122-1/8 148-1/8 54-3/8 76 92-3/8 13-1/8 13-1/8 16-1/8 16-1/8 21-1/8 21-1/8 21-1/8

TRID-4065 TRID-4065 TRID-4365 TRID-4365 TRID-5465 TRID-5465 TRID-7065 TRID-7065 TRID-8565 TRID-8565 TRID-10065 TRID-10065 TRID-10865 TRID-13465 TRID-16065 TRID-7085 TRID-9285 TRID-10885 TRIW-2045 TRIW-2045 TRIW-2345 TRIW-2345 TRIW-2845 TRIW-2845 TRIW-2845 TRIW-4065 TRIW-4065 TRIW-4365 TRIW-4365 TRIW-5465 TRIW-5465 TRIW-6065 TRIW-7065 TRIW-7065 TRIW-8565 TRIW-8565 TRIW-10065 TRIW-10065 TRIW-11265

NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS

143722 143730 143749 175740 143757 143765 143773 143781 143790 143802 143810 143829 143837 143845 143853 177560 177578 177586 143490 143503 143511 175759 143520 143538 175767 143546 143554 143562 143570 143589 143597 143600 143618 143626 143634 143642 143650 143669 143677

1.3 1.3 1.5 1.5 1.8 1.8 1.8 1.8 2.3 2.3 3.3 3.3 3.3 4.3 6 1.8 2.3 3.3 0.5 0.5 0.5 0.5 1.3 1.3 1.3 1.3 1.8 1.8 1.8 1.8 1.8 2.3 2.3 3.3 3.3 3.3 1 1 1

43-9/16 43-9/16 54-1/4 54-1/4

1,500 1,500 2,000 2,000 2,500 2,500 3,000 3,000 3,334 4,167 5,000

240 480 240 480 240 480 240 480 240 240 240 240 240 240 120 240 120 240 120 240 480 240 480 240 480 240 480 240 240 480 240 480 240 480 240

70 70 85 85

100 100 108 134 160

TRID — 19 W/In 2 1,667 2,225 2,778 TRIW — 40 W/In 2 1,000 1,000 1,250 1,250

70 91-3/4 108

Tubular Heater Overview section. Work Temperatures — See Tubular Heater Overview section.

20 20 23 23 28 28 28 40 40

1,500 1,500 1,500 2,000 2,000 2,500 2,500 3,000 3,000 3,500 4,000 4,000 5,000 5,000 6,000 6,000 7,500

Bending — Customer’s minimum inside bend- ing radius is 1-1/2". See bending requirements in the Tubular Heater Overview section.

28 28

43-1/2 43-1/2 54-1/4 54-1/4 60

31-1/2 31-1/2 42-3/8 42-3/8 48

70 70 85 85

58 58 73 73

100 100 112

88 88 100

Stock Status: S = stock NS = non-stock To Order— Specify model, PCN, watts, volts and quantity.

A-14

Made with FlippingBook - Online catalogs