Chromalox Big Red Book

Process Air and Radiant

Process Radiant Heaters Accessories

Protective Grille Protective Grille — Type GR snap-in sections help protect personnel or work from direct contact with hot elements.

Terminal Box Use terminal box with radiant heater elements when complete heaters are not required. Pro- vide enclosure for making wiring connections and support for end of elements These are the end sections of complete heater.

• Protective Grille • Companion Reflector • Terminal Box • Pipe Plug • Jumper Strap

Ordering Information Length (In.) Model

Wt. (Lbs.)

Stock PCN

Ordering Information For Use With

GR-800 S 111860 0.5 S 111878 0.5 S 111886 0.5

8

16-1/16 GR-2 22-5/16 GR-3 38-5/16 GR-4 53-1/16 GR-5 65-7/16 GR-6

Part No.

Single RTU Element Two RTU Elements One UTU Element Single S-RTU Element

3-112426 1-112426 1-112426 2-118462

S 111894 0.75 S 111907 1 S 111915 1

Companion Reflector Companion Reflector — Type CR-RAD consists of aluminum extruded housing with reflector sheet and mounting clamp parts bag. Housing is not drilled or tapped.

METAL SHEATH RADIANT

Wiring Accessories Pipe Plug — Use to close 1/2" tapped wiring entry hole in RAD and RADD type heaters. Specify Part No. 1-113863 (PCN 113970).

Ordering Information Length (In.) Model

Jumper Strap — Use to series connect elements in RADD type heaters. Part No. 30-75230 (PCN 867963 or 113996).

Wt. (Lbs.)

Stock PCN

24 CR-RAD-2083 NS 148072 4 30-1/4 CR-RAD-3113 NS 148080 5 46-1/4 CR-RAD-4183 NS 148099 7 61 CR-RAD-5253 NS 148101 9 73-3/8 CR-RAD-6303 NS 148110 11 85-3/8 CR-RAD-7363 NS 148128 13 105-5/8 CR-RAD-8453 NS 148136 18

E-47