Special Features

Smart Canopy-STC-MSC Gable Lead-Height Change-AP Ceiling Liner

** IT IS IMPORTANT THAT FASTENERS ARE INSTALLED THROUGH THE CENTER OF THE SLOTTED HOLES OF THE RAKE SUPPORT. * FIELD CUT BOTTOM OF WALL PANELS AT ROOF SLOPE HOLD PANELS 1/8" ABOVE HEIGHT CHANGE TRIM.

*WALL PANEL

1/4-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

INSIDE CLOSURE

SIKA 511 CAULK IN LOCKFORM OF SPECIAL TRIM TOP (SPT- ) (BEFORE ASSEMBLING) (SEE INSET DETAIL) TRI-BEAD TAPE SEALER SPECIAL TRIM TOP (SPT- )

HEIGHT CHANGE ANGLE (A-20-H)

1/4-14 X 1 1/4" WT (12" C.C.)

PRE-GLUED THERMAL SPACER (NOT BY CHIEF)

STC/MSC ROOF PANEL

PURLIN

2 7 8 "

(2) #12-14 X 1 1/4" (GA) (36" C.C.)

HEIGHT CHANGE TRIM BOTTOM (GHMBF)

RAKE SUPPORT (A-20-S)

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for PA PANEL)

#12-14 X 1" PANCAKE HEAD (2 EACH PURLIN)

#12-14 X 1 1/4" (EACH PURLIN)

1 4 "

RAKE ANGLE (A-20-B)

PANEL SUPPORT (SSP) 1/4 X 14 X 7/8" (12" C.C.) CEILING LINER PANEL

INSIDE CLOSURE WALL PANEL

** 1/4-14 X 1 1/4" SHOULDER (24" C.C.) OUTSIDE CLOSURE

JAMB TRIM

(2) 1/2" X 1 1/4" BOLTS

8"

CANOPY TRUSS FRAMING SPECIAL TRIM (SPT- ) 1/4-14 X 7/8" (12" C.C.)

CL

SIKA 511 CAULK IN LOCKFORM OF SPECIAL TRIM TOP (SPT- ) (BEFORE ASSEMBLING)