EuroWire September 2014

Wire & Cable India 2014

28 th- 30 th October

Maschinenfabrik been active in India for more than 30 years and Nieho of India, founded in 1997, is well respected in the country for rod breakdown, multiwire drawing machines and bunching machines. NoI operates a modern equipped factory near Hyderabad which was opened in 2007 and enlarged in 2011/2012. It builds rod breakdown machines, annealers, spoolers, bunching machines and pay-o s conforming to Nieho standards, mainly destined for the Indian market. NoI is also responsible for the complete after-sales service, and the reliable and fast supply of Nieho original+ parts for all Nieho machinery. Machinenfabrik Nieho GmbH & Co KG – Germany Website : www.nieho .de Nieho has

///Explore is the premier route in the levels in demanding deliveries with the lowest total cost of ownership. It is a high output solution. Launched at the show will be the new aviation cable production line, as well as the High and Extra High Voltage Roundness Value Package. The dual layer rubber crosshead DHR 130, high voltage triple layer crosshead THX 70 150HV LR and the telecom triple layer crosshead ECH 4/6 TL will all be on display. Maillefer Extrusion OY – Finland Website : www.maillefer.net Maschinenfabrik Nieho and Nieho of India (NoI), its Indian subsidiary, will show an MMH 101 + RM 201 type multiwire drawing machine and a D 800.6 + ARH 630 double twist bunching machine. The MMH 101 + RM 201 type multiwire drawing line is part of Nieho ’s MMH range of multiwire drawing lines with inline annealing for wires made from copper, aluminium and their alloys and designed for a multitude of speci c applications. The MMH type machines cover a nished wire diameter range of 0.5 to 0.08mm and can work with a maximum speed of 36m/s. The largest machine of the MMH range is capable of drawing up to 48 wires. More than 1,100 MMH units are working worldwide. The wires drawn on these machines exceed the most demanding speci - cations and processing requirements in view of electrical conductivity, surface quality and mechanical properties and can be processed to ne multiwire bundles with excellent characteristics. The D 800.6 + ARH 630 double twist bunching machine built by NoI under Nieho licence is adapted to speci c requirements of the Indian market. The machine is designed for strands with a cross section of 0.25 to 16mm² and accommodates spools with a maximum ange diameter of 800mm. Co-exhibiting on the same stand will be Strecker (wire welding machines), Bühler- Würz-Kaltwalztechnik (cold rolling mills), Zeller + Gmelin (drawing lubricants) and H Folke Sandelin AB (HFSAB – lead extrusion and cable stripping, repair and recovery equipment). Maschinenfabrik Nieho Stand: 1D01

The CRRS from H Folke Sandelin

▲

➣➢➣ Die blocks are available to cover an extensive diameter range of 6-225mm (over lead), and a range of melting pots are available for 10, 18, 35 and 60 tonne capacities. H Folke Sandelin AB – Sweden Website : www.hfsab.com

Maillefer Extrusion Stand: 1E01

PS Costruzioni Stand: 1B37

Maillefer’s new market concept with three production solution levels launched this spring has been well received by the global market. There is a match for each market situation – with solutions in low-end as well as high-end categories in almost 20 applications. The new concept improves possibilities to serve wire, cable, pipe and tube manufacturers with di erent capacity needs and investment budgets. The production solution levels are /Enter, //Extend and ///Explore, and they vary in capacity, cost, automation, exibility, product range and space and maintenance requirements. The widest services in the industry are available as an option for all levels. /Enter is a compact quality solution for more sustainable production. It is suitable for those searching for an a ordable investment that is easy to start and maintain in di erent production environments. //Extend is a lean and proven production solution for changing market needs. Its good upgradability and versatile product range guarantee a technical t for the future.

PS Costruzioni automatic lines can work as either a slave to the extruder (online) or as an autonomous nal station. By using a selector the operator can choose either the rst or the second system. PS automatic coiling lines are equipped with strapping machines, thermoshrinking tunnels, boxing machines, stackers and palletisers.

The PS350/8

▲

The DHR 130 from Maillefer

▼

Lines include: PS 350/8: suitable for exible cables from 1.5 to 8mm diameter; solid cables from 1.5 to 6mm diameter with a production of ve coils 100ms long per minute. It can also wind at cables. PS 470/16: suitable for exible cables from 5 to 16mm diameter; solid cables from 5 to 10mm diameter with a production of 3.5 coils 100m long per minute. It can also wind at cables and be equipped

70

www.read-eurowire.com

September 2014