The Accessory Dream Guide - Issue 3
RECEIVER HITCHES AND WIRING
• Tongue capacity should also be consid- ered when mounting a hitch accessory such as a bike rack. For example: a Thule T2 Pro XT bike rack can carry up to 4 bikes and weigh approx 70lbs. Add 4 bikes @ 35lbs each, and the total weight being put on the tongue of the hitch climbs to over 200lbs.
tached to the hitch on your vehicle.
46 THE ACCESSORY DREAM GUIDE • The Tongue Capacity refers to how much weight you can put on the hitch itself, and is typically easily calculated as 10% of the trailer weight. A 5,000lb trailer typically has a tongue weight of 500lbs. TOWING & TONGUE WEIGHT CAPACITY • Receiver hitches are classed by weight rating, from Class 1 through Class 5, with the most popular being a Class 3. • The Towing Capacity refers to the weight of the trailer being towed. Example: a trailer with a total loaded weight of 5,000lbs, requires a hitch and towing vehicle designed for a minimum of 5,000lbs. Receiver hitches, also known as Trailer or Bumper pull hitches are the most common type of hitch installed on Cars, Trucks, SUV’s, Jeeps, & Minivans. Receiver hitches aren’t just for towing! They also give you the flexibility to mount a bike rack, off-road spare tire mount, storage boxes, extended rack mounts and more. Raven Truck Accessories and North Shore Off-Road store locations are equipped to provide you with professional installation for all of your hitch needs, ensuring you get on the road safely and securely. Check out the some of the common hitch related terms that will help you select the hitch setup that will work best for your needs:
• The experts at Raven and North Shore Off- road will help you select the Hitch Ball and Mount that best matches your trailer to your vehicle. HITCH WIRING If you plan on towing, you will need to ensure the vehicle is equipped with the necessary wiring to connect to your trailer. • The two most common types of trailer wiring are “4-Way Flat” or “7-way Round”. • 4-way Flat wiring is most common for lightweight trailers without electric brakes (Taillights / Right Turn Signal / Left Signal / Ground). • 7-way Round wiring is most com- mon for trailers with electric brakes. (Taillights / Right Turn Signal / Left Signal / Ground /Axillary Back-up / Electric Brakes / 12volt power). • If your vehicle is already equipped with 7-way wiring, but the trailer is equipped with a 4-way flat plug, we can supply you with an adapter that easily plugs into the 7-way wiring hole. Contact your nearest Raven Truck Accessories or North Shore Off-road store, and start enjoying the benefits of adding a hitch and hitch accessories before your next trip.
RECEIVER HOLE DIAMETER
The receiver hole open- ing can range in size from 1.25”, 2”, or 2.5”. • The most common size opening is 2” (Class 3 hitch).
• Class 1 and 2 hitches typically have a 1.25” hole opening. If you are mounting a bike rack to your hitch, we recommend installing a hitch with a 2” hole opening whenever possible. For example, many mid-size SUV’s and minivans can be fitted with a Class 1, 2 or 3 hitch…. we recommend installing the Class 3 with a 2” hole opening. This will provide a more stable platform for adding bike racks and other hitch mounted accessories.
HITCH BALL AND MOUNT
If your hitch is being used for towing a trailer, you will need a Hitch Ball and Mount.
• Always match a hitch ball with a weight rating equal to or greater than the maximum capacity of the hitch. • The height (or “drop”) of the mount must ensure that the trailer is level when at-
Written by Raven Managing Partner Steve Hagopian
Made with FlippingBook flipbook maker