Caterpillar Performance Handbook, January 2017, SEBD0351-47

Bucket Selection ● 910K — High Lift

Wheel Loaders IntegratedToolcarriers

910K — High Lift

kg/m3 900 950 1000 1050 1100 1150 1250 1350 1450 1500 1550 1600 1650 lb/yd3 1517 1601 1685 1769 1854 1938 2106 2275 2443 2528 2612 2696 2780 m3 yd3

Bucket Fill Factor

1.3 1.4 1.6 1.8 1.9 1.3 1.3 1.5 1.6 1.7 1.9 1.3 1.5 1.7 1.9

111% 108% 104% 101% 98%

1.7 1.8 2.1 2.4 2.5 1.7 1.7 2.0 2.1 2.2 2.5 1.7 2.0 2.2 2.5

111% 103% 100% 97%

112% 103% 96%

Pin On

114% 108% 103% 99%

113% 107% 102% 97%

109% 106% 102% 99% 96% 109% 106% 102% 99% 96%

108% 100%

IT

115% 110% 101%

113% 107% 103% 95%

General Purpose

103% 97%

107% 104% 100% 97% 94%

106% 98%

ISO

110% 105% 100%

100% 94%

Material density and fill factor are key variables when choosing the appropriate size of the bucket.The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the Cat Optimized Z-bar Loader will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.

910K — High Lift Fill Factors

Materials

Density

Fill %

Earth and rock Sand & gravel

~ 1800 kg/m3 ~ 1700 kg/m3 ~ 1600 kg/m3 ~ 750 kg/m3 ~ 500 kg/m3

~ 3033 lb/yd 3 ~ 2865 lb/yd 3 ~ 2696 lb/yd 3 ~ 1264 lb/yd 3 ~ 843 lb/yd 3

~ 115% ~ 115% ~ 105% ~ 100% ~ 100%

Aggregates Bulk grains Woodchips

23-328 Edition 47