Caterpillar Performance Handbook, January 2017, SEBD0351-47

Bucket Selection ● 914K — Standard Lift

Wheel Loaders IntegratedToolcarriers

914K — Standard Lift

kg/m3 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 lb/yd3 1517 1685 1854 2022 2191 2359 2528 2696 2865 3034 3202 3370 3539 m3 yd3

Bucket Fill Factor

1.3 1.4 1.6 1.8 1.9 1.3 1.3 1.5 1.6 1.7 1.9 1.3 1.5 1.7 1.9

113% 107% 102%

1.7 1.8 2.1 2.4 2.5 1.7 1.7 2.0 2.1 2.2 2.5 1.7 2.0 2.2 2.5

111% 105% 100% 95%

115% 107% 101%

Pin On

23

108% 101% 94%

109% 102% 95%

111% 105% 100% 111% 105% 100%

113% 106% 100% 95%

IT

112% 105% 99%

112% 105% 98%

General Purpose

113% 104% 97%

114% 108% 103% 98%

110% 103% 98%

ISO

109% 102% 96%

110% 102% 95%

Material density and fill factor are key variables when choosing the appropriate size of the bucket.The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the Cat Optimized Z-bar Loader will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.

914K — Standard Lift Fill Factors

Materials

Density

Fill %

Earth and rock Sand & gravel

~ 1800 kg/m3 ~ 1700 kg/m3 ~ 1600 kg/m3 ~ 750 kg/m3 ~ 500 kg/m3

~ 3033 lb/yd 3 ~ 2865 lb/yd 3 ~ 2696 lb/yd 3 ~ 1264 lb/yd 3 ~ 843 lb/yd 3

~ 115% ~ 115% ~ 105% ~ 100% ~ 100%

Aggregates Bulk grains Woodchips

Edition 47 23-329