Caterpillar Performance Handbook, January 2017, SEBD0351-47

Bucket Selection ● 910M — Standard Lift

Wheel Loaders IntegratedToolcarriers

910M — Standard Lift

kg/m3 1150 1225 1300 1375 1450 1525 1600 1675 1750 1751 1825 1900 1901 1902 lb/yd3 1938 2064 2191 2317 2443 2570 2696 2822 2949 2950 3075 3202 3203 3205 m3 yd3

Bucket Fill Factor

1.3 1.4 1.6 1.8 1.9 1.3 1.3 1.5 1.6 1.7 1.3 1.5 1.7

113% 113% 109% 104% 104% 104% 110% 105% 105% 101% 97% 97% 97%

1.7 1.8 2.1 2.4 2.5 1.7 1.7 2.0 2.1 2.2 1.7 2.0 2.2

110% 104% 99% 95%

Pin On

23

114% 107% 101% 96%

114% 107% 101% 95%

111% 111% 107% 102% 102% 102% 112% 111% 107% 103% 103% 103%

109% 104% 100% 95% 95%

IT

113% 107% 102% 97%

General Purpose

112% 106% 100% 95%

114% 109% 109% 104% 100% 100% 100%

112% 107% 102% 97%

ISO

109% 103% 98%

Material density and fill factor are key variables when choosing the appropriate size of the bucket.The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the Cat Optimized Z-bar Loader will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.

910M — Standard Lift Fill Factors

Materials

Density

Fill %

Earth and rock Sand & gravel

~ 1800 kg/m3 ~ 1700 kg/m3 ~ 1600 kg/m3 ~ 750 kg/m3 ~ 500 kg/m3

~ 3033 lb/yd 3 ~ 2865 lb/yd 3 ~ 2696 lb/yd 3 ~ 1264 lb/yd 3 ~ 843 lb/yd 3

~ 115% ~ 115% ~ 105% ~ 100% ~ 100%

Aggregates Bulk grains Woodchips

Edition 47 23-331