Caterpillar Performance Handbook, January 2017, SEBD0351-47

Bucket Selection ● 910M — High Lift

Wheel Loaders IntegratedToolcarriers

910M — High Lift

kg/m3 1075 1150 1225 1300 1375 1450 1525 1600 1675 1676 1750 1825 1826 1827 lb/yd3 1811 1938 2064 2191 2317 2443 2570 2696 2822 2824 2949 3075 3077 3078 m3 yd3

Bucket Fill Factor

1.3 1.4 1.6 1.8 1.9 1.3 1.3 1.5 1.6 1.7 1.3 1.5 1.7

110% 110% 106% 101% 101% 101%

1.7 1.8 2.1 2.4 2.5 1.7 1.7 2.0 2.1 2.2 1.7 2.0 2.2

112% 107% 102% 102% 98%

114% 108% 102% 97%

Pin On

113% 106% 100% 95%

114% 107% 100% 94%

113% 108% 108% 103% 99% 99% 99% 113% 108% 108% 104% 99% 99% 99%

113% 107% 102% 97%

IT

111% 105% 100% 95%

General Purpose

111% 104% 98%

111% 106% 106% 102% 97% 97% 97%

111% 105% 100% 95%

ISO

108% 102% 96%

Material density and fill factor are key variables when choosing the appropriate size of the bucket.The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the Cat Optimized Z-bar Loader will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.

910M — High Lift Fill Factors

Materials

Density

Fill %

Earth and rock Sand & gravel

~ 1800 kg/m3 ~ 1700 kg/m3 ~ 1600 kg/m3 ~ 750 kg/m3 ~ 500 kg/m3

~ 3033 lb/yd 3 ~ 2865 lb/yd 3 ~ 2696 lb/yd 3 ~ 1264 lb/yd 3 ~ 843 lb/yd 3

~ 115% ~ 115% ~ 105% ~ 100% ~ 100%

Aggregates Bulk grains Woodchips

23-332 Edition 47