Caterpillar Performance Handbook, January 2017, SEBD0351-47

Bucket Selection ● 914M — Standard Lift

Wheel Loaders IntegratedToolcarriers

914M — Standard Lift

kg/m3 1450 1525 1600 1675 1750 1825 1900 1975 2050 2051 2125 2200 2201 2202 lb/yd3 2443 2570 2696 2822 2949 3075 3202 3328 3454 3456 3581 3707 3709 3710 m3 yd3

Bucket Fill Factor

1.3 1.4 1.6 1.8 1.9 1.3 1.3 1.5 1.6 1.7 1.3 1.5 1.7

112% 108% 104% 104% 100% 97% 97% 97%

1.7 1.8 2.1 2.4 2.5 1.7 1.7 2.0 2.1 2.2 1.7 2.0 2.2

113% 108% 104% 100% 97% 96%

112% 107% 102% 98%

Pin On

23

103% 98%

97%

115% 110% 106% 102% 102% 98% 95% 95% 95% 115% 110% 106% 102% 102% 99% 95% 95% 95%

112% 107% 102% 98% 94%

IT

109% 104% 100% 95%

General Purpose

108% 102% 98%

112% 108% 104% 100% 100% 96%

115% 109% 104% 100% 96%

ISO

105% 100% 95%

Material density and fill factor are key variables when choosing the appropriate size of the bucket.The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the Cat Optimized Z-bar Loader will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.

914M — Standard Lift Fill Factors

Materials

Density

Fill %

Earth and rock Sand & gravel

~ 1800 kg/m3 ~ 1700 kg/m3 ~ 1600 kg/m3 ~ 750 kg/m3 ~ 500 kg/m3

~ 3033 lb/yd 3 ~ 2865 lb/yd 3 ~ 2696 lb/yd 3 ~ 1264 lb/yd 3 ~ 843 lb/yd 3

~ 115% ~ 115% ~ 105% ~ 100% ~ 100%

Aggregates Bulk grains Woodchips

Edition 47 23-333