Caterpillar Performance Handbook, January 2017, SEBD0351-47

Bucket Selection ● 914M — High Lift

Wheel Loaders IntegratedToolcarriers

914M — High Lift

kg/m3 1450 1400 1500 1550 1750 1850 1950 2000 2050 2051 2100 2150 2151 2152 lb/yd3 2443 2359 2528 2612 2949 3117 3286 3370 3454 3456 3539 3623 3624 3626 m3 yd3

Bucket Fill Factor

1.3 1.4 1.6 1.5 1.9 1.3 1.3 1.5 1.6 1.7 1.3 1.5 1.7

111% 105% 100% 97% 95% 95%

1.7 1.8 2.1 2.0 2.5 1.7 1.7 2.0 2.1 2.2 1.7 2.0 2.2

103% 98%

108% 112% 104% 101%

Pin On

114% 110% 106% 94%

105% 99% 94% 105% 99% 94%

109% 112% 105% 102% 101% 105% 98% 95%

IT

General Purpose

95% 98%

103% 97%

106% 110% 103% 99%

ISO

96%

Material density and fill factor are key variables when choosing the appropriate size of the bucket.The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the Cat Optimized Z-bar Loader will demonstrate fill factors greater than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing.

914M — High Lift Fill Factors

Materials

Density

Fill %

Earth and rock Sand & gravel

~ 1800 kg/m3 ~ 1700 kg/m3 ~ 1600 kg/m3 ~ 750 kg/m3 ~ 500 kg/m3

~ 3033 lb/yd 3 ~ 2865 lb/yd 3 ~ 2696 lb/yd 3 ~ 1264 lb/yd 3 ~ 843 lb/yd 3

~ 115% ~ 115% ~ 105% ~ 100% ~ 100%

Aggregates Bulk grains Woodchips

23-334 Edition 47