Caterpillar Performance Handbook, January 2017, SEBD0351-47

Cat Carrier Matching Guide

Hydraulic Hammers

H95E s H110E s H115E s H120E s H130E s H140E s H160E s H180E s

Carrier weight Minimum

mt

7.0 42.0 lb 15,400 24,300 26,500 35,300 39,700 52,920 70,600 92,600 76.0 lb 30,900 39,700 44,100 59,500 79,400 92,600 121,300 167,600 11.0 12.0 16.0 18.0 24.0 32.0 mt 14.0 18.0 20.0 27.0 36.0 42.0 55.0

Maximum

Excavators 300.9D 301.4C 301.7D CR

301.8C 302.2D 302.4D 302.5C 302.7D CR 303.5D CR/303.5E CR 304D CR/304E CR 305D CR/305E CR 305.5D CR/305.5E CR 307D

8

• • • •

308D CR/308E CR SB/308E2 CR SB

311D RR

• • • • •

312D/312D L/312E/312E L

• • • • • • • •

314D CR/314E CR

315D 316E 318E 319D

• • • • • • • • •

• • • • • • • • •

320D/320E

320D RR/320E RR

321D LCR

324D 324E

• • • • •

328D LCR 329D/329E

•

336D/336E/336EH

• • •

345D 349E 365C 374D

• • • •

*Installation of add-on optional counterweight to machine is required. **Hydraulic flows and pressures must be checked to verify they match the requirements for the hammer being installed. NOTE: Caterpillar recommends the use of a suitable shield/guard system to insure operator has adequate protection from flying debris. NOTE: These matches are for general reference purposes for Cat machines only.When special boom and quick coupler arrangements are used, these matches may not apply. NOTE: When matching hammers to competitive carriers, selection should be made by carrier weight. Refer to the carrier range at the top of the table in order to determine the correct match.

Edition 47 8-9