Caterpillar Performance Handbook, January 2017, SEBD0351-47

Cat Carrier Matching Guide

Hydraulic Hammers

H55E H55E s FlatTop

H65E H65E s FlatTop H75E s

H35E H35E s

H45E H45E s

H55E Pin-on

H65E Pin-on

H25D

Carrier weight Minimum

mt

0.8 6.0 lb 1760 2430 3310 5500 5500 6610 6610 13,200 10.0 lb 2430 5300 7060 13,200 13,200 19,800 19,800 22,100 1.1 1.5 2.5 2.5 3.0 3.0 mt 1.1 2.4 3.2 6.0 6.0 9.0 9.0

Maximum

Wheeled Excavators M313C/M313D M315C/M315D M316C/M316D M318C/M318D M322C/M322D Skid Steer and Multi-Terrain Loaders 216B2/216B3

• • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

226B2/226B3 236B3/236D 242B3/242D 247B2/247B3 252B2/252B3 257B3/257D 259B3/259D 262C2/262D 277C2/277D 279C2/279D 287C2/287D 289C2/289D 246C/246D 272D/272D XHP

297C

299C/299D/299D XHP

Backhoes

BH30/BH30W BH150/BH160

• •

• •

•

Backhoe Loaders 416E/416F

•** •** •**

• • •

420E/420F 430E/430F

446D 450E/450F *Installation of add-on optional counterweight to machine is required. **Hydraulic flows and pressures must be checked to verify they match the requirements for the hammer being installed. NOTE: Caterpillar recommends the use of a suitable shield/guard system to insure operator has adequate protection from flying debris. NOTE: These matches are for general reference purposes for Cat machines only.When special boom and quick coupler arrangements are used, these matches may not apply. NOTE: When matching hammers to competitive carriers, selection should be made by carrier weight. Refer to the carrier range at the top of the table in order to determine the correct match.

8-10 Edition 47