Caterpillar Performance Handbook, January 2017, SEBD0351-47

Lifting Capacities ● MH3022 (Grenoble Sourced)

Material Handlers

Lift Capacities All values are in lb, bucket cylinder and linkage installed, without bucket, with counterweight (9260 lb), heavy lift on.

Load point height

Load over front

Load over rear

Load over side

Load at maximum reach (sticknose/bucket pin)

Undercarriage

Boom

Stick

MH (9'0") or MH Narrow (8'4")

17'7" MH

13'9" Straight Stick

10 ft

15 ft

20 ft

25 ft

30 ft

ft

Undercarriage configuration SA–2 sets stabilizersup SA–2sets stabilizersdown Narrow– 2 sets stabilizersup Narrow– 2 sets stabilizersdown SA–2 sets stabilizersup SA–2sets stabilizersdown Narrow– 2 sets stabilizersup Narrow– 2 sets stabilizersdown SA–2 sets stabilizersup SA–2sets stabilizersdown Narrow– 2 sets stabilizersup Narrow– 2 sets stabilizersdown SA–2 sets stabilizersup SA–2sets stabilizersdown Narrow– 2 sets stabilizersup Narrow– 2 sets stabilizersdown SA–2 sets stabilizersup SA–2sets stabilizersdown Narrow– 2 sets stabilizersup Narrow– 2 sets stabilizersdown SA–2sets stabilizersup SA–2sets stabilizersdown Narrow– 2 sets stabilizersup Narrow– 2 sets stabilizersdown SA–2sets stabilizersup SA–2sets stabilizersdown Narrow– 2 sets stabilizersup Narrow– 2 sets stabilizersdown SA– 2 sets stabilizersup SA–2sets stabilizersdown Narrow– 2 sets stabilizersup Narrow– 2 sets stabilizersdown

*18,200 *18,200 14,700 *18,200 *18,200 *18,200 18,000 18,000 13,100 *18,100 *18,100 *18,100

*12,900 *12,900 10,100 *12,900 *12,900 *12,900 12,400 12,400 9100 *13,000 *13,000 *13,000 9200 9200 6800 *11,300 *11,300 *11,300 8300 8300 6000 *11,300 *11,300 11,200 7400 7400 5400 *10,600 *10,600 *10,600 6700 6700 4700 *10,600 *10,600 9000 6500 6500 4700 *10,500 *10,500 10,400 5800 5800 4100 *10,500 *10,500 7900

30 ft

18.73

12,500 12,500 9400 *17,600 *17,600 *17,600 11,300 11,300 8300 *17,500 *17,500 15,200

25 ft

23.88

12,500 12,500 9300 8600 8600 6400 *18,700 *18,700 *18,700 *15,500 *15,500 13,700 11,300 11,300 8300 7700 7700 5600 *18,700 *18,700 15,100 14,700 14,700 10,400

20 ft

27.20

19,600 19,600 14,400 12,200 12,200 9100 8500 8500 6300 *24,000 *24,000 *24,000 *19,300 *19,300 *19,300 *16,000 *16,000 13,600 17,700 17,700 12,800 11,000 11,000 8000 7600 7600 5500 *24,000 *24,000 *24,000 *19,300 *19,300 14,800 14,600 14,600 10,300

15 ft

29.27

37,700 37,700 25,700 18,500 18,500 13,500 11,700 11,700 8600 8300 8300 6000 6100 6100 4400 6000 6000 4300 30.35 *38,800 *38,800 *38,800 *26,500 *26,500 *26,500 *20,200 *20,200 19,200 *16,000 *16,000 13,300 *12,000 *12,000 9900 *10,700 *10,700 9700 33,400 33,400 22,500 16,700 16,700 11,900 10,600 10,600 7600 7400 7400 5300 5500 5500 3800 5400 5400 3700 *38,700 *38,700 *38,700 *26,400 *26,400 23,200 *20,200 *20,200 14,300 14,400 14,400 10,000 10,600 10,600 7400 10,500 10,500 7300 *29,500 *29,500 22,700 17,400 17,400 12,400 11,200 11,200 8100 8000 8000 5800 6000 6000 4300 5900 5900 4200 30.58 *29,500 *29,500 *29,500 *28,000 *28,000 *28,000 *20,500 *20,500 18,600 *15,600 *15,600 13,000 *11,200 *11,200 9800 *10,500 *10,500 9500 30,000 30,000 19,500 15,500 15,500 10,800 10,000 10,000 7100 7200 7200 5000 5400 5400 3700 5200 5200 3600 *30,800 *30,800 *30,800 *28,000 *28,000 21,900 20,300 20,300 13,800 14,100 14,100 9700 10,500 10,500 7300 10,200 10,200 7100

10 ft

5 ft

*14,400 *14,400 *14,400 16,500 16,500 11,600 10,800 10,800 7700 7800 7800 5600 *14,400 *14,400 *14,400 *26,600 *26,600 *26,600 *19,200 *19,200 18,100 *14,100 *14,100 12,800 *14,400 *14,400 *14,400 14,700 14,700 10,100 9600 9600 6700 6900 6900 4800 *14,400 *14,400 *14,400 *26,700 *26,700 20,900 *19,300 *19,300 13,300 13,800 13,800 9500

0 ft

16,100 16,100 11,200 10,500 10,500 7500 *21,300 *21,300 *21,300 *15,700 *15,700 *15,700 14,300 14,300 9700 9400 9400 6500 *21,500 *21,500 20,500 *15,800 *15,800 13,000

–5 ft

*Limited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information.

9-44 Edition 47