Workholding Solutions Master Catalog
[190] 7.50
PRODUCTION VISES
3.00 [73]
0.38 [10]
1.68
0.96 [24]
3.438 [87.5]
WORKHOLDING SOLUTIONS GROUP
1.22 [30]
Production Vises – 4" (100mm)
2.50 [64] [176] 7.00
[56] 2.20
[190] 7.50
3.00 [73]
0.38 [10]
0.25 [6] 0.50 [12]
1.68
4.00 [100]
Machinable Area
0.81 [20]
0.96 [24]
3.438 [87.5]
1.22 [30]
[20 MAX.] .80 MAX.
2.50 [64] [176] 7.00
15.00 [380]
[6.4] .25
[56] 2.20 Vise With Hard Jaw Carrier Set and hardened steel inserts
Vise With Machinable Soft Jaws
0.25 [6] 0.50 [12]
4.00 [100]
Machinable Area
0.81 [20]
Features and Benefits: • Compact design in 3 extruded aluminum base styles for easy setup and to reduce weight on worktable. • Fully sealed, patented lead screw assembly for long maintenance free service. Openings allow chips to flow out of the vise base. • Hardened stainless steel rails, ground within ±0.001" (0.025mm) provide precise location, resist wear and provide strong support to jaws.
Clamping Force Jergens 4" (100mm)
[20 MAX.] .80 MAX. • Supplied with aluminum soft jaws, fully machineable and reversible. Additional jaws can be ordered separately, see page 148. Alternate jaw types can be ordered with the vise base by adding the following suffix to the part numbers: -H for Jaw Carrier Set with Hardened Steel Inserts -S for machineable Steel Jaws -T for extra Tall aluminum jaws sets -W for extra Wide aluminum jaw sets
Torque
Clamping Force
ft. lbs
N•m lbs
kgf
20 30
27 41 54 68 81
3,600 1,630 4,500 2,040 5,300 2,400 6,200 2,800 7,200* 3,250*
15.00 [380] 40
[6.4] .25
PRODUCTION VISES
50 60
*Recommended Maximum
Maximum Clamping RangeWith Shaped Jaws Dual Station: 6.75" (170mm) Single Station: 14.40" (365mm)
Ball Lock ® Base The Ball Lock ® Base Vise is for use with the Jergens Ball Lock ® Quick Change Mounting System. The base has a “jig saw” pattern to allow the vises to be mounted close to each other. For more information about Ball Lock ® , see pages 122–123.
Mounting Dimensions
15.00
12.00
6.00
20mm Primary Liners (2) Plcs
Inch
4.00
1.22
3.00
Ball Lock ® Shank Part No.
Shank Size
Part No. 49405
Wt.
6.00 7.92
0.75
3.370 ±0.001
49601
31 lbs
20mm x 3/4"
Clearance Hole For Holddown
380
300
150
20mm Primary Liners (2) Plcs
100
Metric
30
75
150 200
20
Ball Lock ® Shank Part No.
Shank Size
85.6
Part No. 69405
Wt.
49651
14 Kg
20mm x 20mm
Clearance Hole For Holddown
Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA
124
Made with FlippingBook - Online catalogs