Workholding Solutions Master Catalog

POWER CLAMPING

WORKHOLDING SOLUTIONS GROUP

Swing Clamps

Jergens Swing Clamps are designed to swing 80° away from the workpiece to allow easy accessibility for part insertion or removal. Swing Clamps may be used in any attitude. The clamping arm may be positioned to swing either to the left or right by repositioning one cap screw. The right hand swing is standard.

• Right or Left Hand Swing • 4800 lbs. Clamping Force • Operates in any position • Clamp arm has 1/4" of vertical travel • Can be used with flood coolant

Specifications

Part Number

60685

IMPORTANT: Jergens Swing Clamps are built to operate on pre-fill systems allowing much larger circuits to be used. To use a Jergens Swing Clamp with a standard booster or with any other power source you must use the Flow Limit Valve shown below.

Operating Volume (Cu. In.)

POWER CLAMPING

1.6

MinimumOperating Pressure (psi) MaximumOperating Pressure (psi) MaximumOutput Force (lbs.)

80*

3000

4800

Weight (lbs.) 9.25 *80 psi to swing, 200 psi to clamp.

Flow Limit Valves

The Flow Limit Valve restricts the flow of oil to dampen the rotating action of the Swing Clamp. Flow Limit Valves are not needed with 36:1 or 71:1 Air Powered Hydraulic Pumps. (Part Number 61755 or 61756 ).

Part Number 61648

Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

168