TPT March 2010

T ube D üsseldorf 2010

12-16 A pril 2010

Concerning piston rods and cylinder tubes Holzrichter is aiming for a leading position as stockholder. New in its programme are stainless piston rods in the quality 1.4057 hard chromium plated, now with diameters of 140 and 160mm from stock. This completes a broad range of piston rods already available hardened and in stainless steel. Holzrichter also sells cold drawn precision tubes EN 10305-2 in the quality E235+C. They are currently available in approximately 100 dimensions from 10 x 1mm up to 200 x 3mm. These tubes possess narrowest tolerances and often replace the classical seamless precision tubes. Fax: +49 2025 62218 Email: a.hardt@holzrichter-stahl.de Website: www.holzrichter-stahl.de Inductoheat Australia Hall 6 Stand B40 INDUCTOHEAT’S Australian facility is a leader in the design and manufacture of continuous annealing systems for the copper tube industry. Inductoheat ‘ACR’ annealing systems feature full line mechanics, solid state

The range starts with a single-channel model, through the FOCAnalyzer family, including the PRO ® series, which can control up to 256 channels, and is designed for simultaneous inspection of several production lines. It has a wide frequency range, including very low frequencies, and is used in facilities requiring a large number of probes for the production control at different process steps, and also for complex inspection systems at high speeds.

inverters operating at both medium and high frequencies, and inductor coil lines which operate under reducing atmospheres to produce bright annealed tube on both interior and exterior surfaces. High speed annealing at line speeds of up to 600m/ min can be achieved with minimal operator interface. Fax: +61 3 9786 8522 Website: www.inductoheat.com.au ISEND SA Spain Hall 4 Stand G04 ISEND SA provides eddy current and flux leakage test systems customised to users’ needs and standards. The technology is used for inspection, measurement and industrial quality control in the iron and steel industry, automotive, energy, petrochemical and other industrial sectors. The company has launched two new ranges of eddy current equipment: FOCAnalyzer PRO ® and ROTOdiscover ® , targeting the inspection needs of the pipe/ tube and wire industry. The new products incorporate state-of-the-art technologies and new intensive data processing algorithms.



ISEND’s FOCAnalyzer

The ROTOdiscover range for rotating industrial systems features up to 8 channels, with controlled lift-off on each channel. It allows rotating inspection with 2, 4, 6 or 8 probes at high rotary speeds, which means there is no need to slow down

the production line speed. Email: contact@isend.es Website: www.isend.es

87x125-P tig-Rohre-e-2c 23.02.2010 11:51 Uhr Seit 1

Tube punching WITHOUT HOLE DEFORMATION

Vertretung gesucht

PETIG AG Rhenaniastraße 39

D-41516 Grevenbroich Tel. +49 (2181) 78 58 Fax +49 (2181) 73108 www.petig.com • info@petig.com

137

www.read-tpt.com

M arch 2010

›