Cargo Securement Solutions

FLATBED PRODUCTS

PRODUITS POUR REMORQUES À PLATEAU · PRODUCTOS PARA EQUIPOS ABIERTOS

SEE WARnIngS on PAgE 9 • VoIR lES AVERtISSEMEntS En PAgE 10 • VÉASE l AS AdVERtEnCIAS En lA PÁgInA 11

Kinedyne Ratchet

Straps are designed to

handlemost types of flatbed

tie‑down requirements.

Kinedyne ratchet straps are designed to handle most types of flatbed tie-down requirements. Ratchet straps

have a 18” fixed end as standard. Special length fixed ends are available as a special order. All ratchet straps are

labeled to meet CVSA guidelines, CHP standards, North American Cargo Securement Standards, DOT regulations

and WSTDA recommended standards. Alternate end hardware available, see Hardware Products.

NOTE: Items listed with a “BX” suffix are available in special Ship & Display retail friendly master carton. See page 80 for details.

RATChET STRApS

2” RATCHET STRAP

WITH 802 STANDARD HANDLE

532720

27’

533020

30’

With 1015 Flat hooks & 2084FK Webbing

Working Load Limit:

3,335 lbs./1513 kgs.

533039

30’

With 3705-2 Chain Anchors & 2084FK Webbing

Working Load Limit:

3,335 lbs./1513 kgs.

533060

30’

With 1007 Wire hooks & 2084FK Webbing

Working Load Limit:

1,670 lbs./757 kgs.

Flat Hook

Chain Anchor

Wire Hook

WARNING:

Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn or damaged shall not be used and shall be replaced immediately.

All strap assemblies shall be inspected prior to each use. The use of “Cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne

approved device, can cause serious injury to the user and/or bystander. Webbing straps are rated for use in temperature range from +194 degrees F (+90°C) to -40 degrees F (-40°C).