57 / 104
SYSTÈMES KAPTIVE BEAM · SISTEMA DE BARRAS CAPTIVAS
KAPTIVE BEAM SYSTEMS
57
SEE WARnIngS on PAgE 9 • VoIR lES AVERtISSEMEntS En PAgE 10 • VÉASE l AS AdVERtEnCIAS En lA PÁgInA 11
TRACK END CAPS FOR K1 TRACK
The specially designed track end caps
provide a closure point for the end of
the track to captivate the beam. They
also provide a finished appearance for
the bottom end of the Kaptive Beam
track.
2043
– Single Row End Cap
Weight:
.24 lbs./.11 kgs.
2044
– double Row End Cap
Weight: .
54 lbs/.24 kgs.
Kaptive Beam System Accessories
RELEASE POLE WITH MOUNTING CLIPS
The new head design allows for
rapid release of the beam pawl,
and has a notched profile for a
secure hold when stowing beams
in an elevated position. It has a
safe, non-slip vinyl grip and comes
with mounting hardware for easy
storage.
10022
Weight:
1.8 lbs./0.8 kgs.
NOTE: This pole can be used with all Kaptive Beam systems.
LOGISTIC STRAPS FOR K2 KAPTIVE BEAM SYSTEMS
logistics straps are designed for use with K2 Kaptive Beam Systems and feature the 80040 Butterfly fitting which engages with
standard K2 Kaptive Beam logistic track.
641692
2” logistic Strap x 16’ with 811 Ratchet Buckle and 80040 Butterfly Fittings
Working Load Limit:
1,000 lbs./ 454 kgs.
651692
2” logistic Strap x 16’ with 910 Cam Buckle and 80040 Butterfly Fittings
Working Load Limit:
835 lbs./ 380 kgs.
NOTE: See page 72 for specifications on 80040 K2 Track Butterfly Fitting.
INSTRUCTION LABELS
Self-adhesive labels detail operating instructions for Kaptive
Beam systems can be permanently
affixed to trailer wall.
KB699
Label for K1 Original Kaptive Beam systems.
L1KB699
Label for L1 Kaptive Beam systems.
K2KB699
Label for K2 Kaptive Beam systems.
Step 1.
Hold the fitting so the two front edges
touch and spread the back edges apart
in a ‘butterfly’ position.
Step 2.
Insert the front of the fittings into the
track. Engage the left side first and
then maneuver the right side into the
opposite edge of the track.
Step 3.
Close the ‘butterfly’ so the front and
back edges of the fitting are touching
face to face.
Step 4.
Tension the strap to ensure both sides of
the fitting are engaged with the strap.
1
2
3
4
Operating Instructions For K2 Logistic Straps