EoW September 2009

68 / 116

66 EuroWire – September 2009
wire Southeast Asia 2009
13-15 October
die box, which improves productivity;
and reduction of dust on the wire drawing
machines, resulting in an improved
working environment for the operators.
Condat dust free dry lubricants and
pelletized powders will maintain their
current labelling and will always comply
with the most advanced environmental
regulations.
Condat AS – France
Website:
Daloo
Booth B35
Daloo offers low cost self-traversing
take-ups and payoffs ranging from
1,600mm (6MT) up to 3,600mm (20MT).
All the machines are equipped with AC
motors for reduced maintenance; two
gear motors have brake and screw for
easy handling during the loading and
unloading of reels.
The heavy-duty machine rolls on ground
rails. The control panel is user-friendly and
placed for practical operator control on
either side of the machine. The take-up
has two vertical rollers with adjustable
width and a horizontal roller.
Daloo is thought to be the first low cost
wire and cable machinery manufacturer
in China with European experience.
The Gauder Group launched this new
autonomous company in 2008.
Daloo Machines – China
Website:
EJP Machines
German Pavilion
EJP is a manufacturer of combined
drawing systems for tube and bar produc-
tion (round, hexagonal, square or flat)
from steel, copper, copper alloys and
aluminium. The company’s manufacturing
programme includes combined drawing
systems (coil-bar, bar-bar), peeling
machines, 2-roll-straightening machines,
shot blasting machines, rotation and
flying shears, flying saws, chamfering,
bundling and re-sawing machines.
EJP Maschinen GmbH – Germany
Website:
Ebner
Austrian Pavilion
SeAH Special Steel established itself as
South Korea’s largest steel wire producer
when it ordered its first Ebner Hicon/H2®
facility in 2001.
Hicon® stands for high convection, H2 for
the process atmosphere the annealer is
suitable for. N2 is used for annealing hot
rolled rod, H2 for drawn wire, vaporising
drawing lubricants.
The Hicon system combines highest
capacity with best temperature uniformity
of the annealed material and thus uniform
mechanical properties.
The final two of a total of 13 Hicon/H2
workbases that SeAH operates in South
Korea were ordered from Ebner in 2007.
At the same time, SeAH’s positive
experience with Ebner’s technology led
to the decision to install a HICON/H2
facility in the new POSCO SeAH Steel Wire
(Nantong) works in China.
Another advantage was Ebner’s Chinese
subsidiary in Taicang: support was
available for technical questions and in
the search for suppliers and installation
companies.
Both facilities have exactly the same
dimensions: about 4m charging diameter,
5m charging height. They are designed
for a maximum annealing temperature
of 810°C and a net charge weight of
up to 50t.
The pure nitrogen process atmosphere of
the workbases is continually supervised
and adjusted automatically to prevent
edge decarburisation of hot rolled scaled
wire.
Ebner Industrieofenbau GmbH –
Austria
Website :
Eder Engineering GmbH
Austrian Pavilion
For over 60 years, Eder Engineering
GmbH has offered precision drawing
dies, efficient standard, semi-automatic
and fully automatic machines for
reconditioning and production of ultra-
hard precision tools as well as technical
assistance for all Eder die-tool working
equipment.
Eder’s stand will feature information on
precision die-working machines and
equipment for diamond, PCD and tung-
sten carbide dies; ultra-hard precision
wire drawing die-tools (with round
and profiled bores); die workshop
ancillary equipment and diamond
powders, pastes, suspensions and
grinding pins.
Other products and specialities will
be displayed in a multi-media show
➣➢➣
Daloo Machines is part of the Gauder Group ▲ ▲
EJP supplies a range of wire drawing equipment ▲ ▲
Ebner’s Hicon/H2 ▼ ▼