EoW September 2009

76 / 116

74 EuroWire – September 2009
wire Southeast Asia 2009
13-15 October
SPX Precision Components,
FENN division
Booth B10
SPX Precision Components, FENN division
is a global supplier of metal forming
machinery.
Established over 100 years it has a solid
reputation and customer base, built on
decades of engineering and machine
building experience.
Its extensive range includes rolling
mills, wire flattening and shaping lines,
turks heads, capstans, spoolers, wire and
tube machinery, draw benches, swaging
machines and feed units, impact cutoff
machines, tube end forming machines
and Torin CNC spring coiling machines.
SPX recognises the growing need of the
industry for total metal forming solutions,
not just a piece of machinery, and in
this regard is well positioned to offer
the technical, process and engineering
expertise to provide the best solution to
a company’s needs.
SPX Precision Components, Fenn
Division – USA
Website:
Schnell SpA
Italian Pavilion
Schnell’s Spirex machine can achieve a
continuous stirrup bend with vertical
arms and variable pitch, capable of pro-
viding continuous clamping for concrete
beams or pillars.
The vertical arms are always vertical
to the main reinforcement, while the
horizontal arms diverge, determining the
pitch (also variable) among the different
stirrups.
The continuous stirrup Spirex eliminates
the errors that may occur on the jobsite
during the placing of the reinforcement.
Spirex is a single piece of steel rod,
fast and simple to use, to match the
original design of the engineer without
negligence and damage.
Spirex continuous stirrups with vertical
arms are produced with a pre-established
pitch.
Stirrups (spirals) are always in the right
position along the reinforcement, even
with variable pitches.
The number and the position of the
stirrups along the reinforcement cannot
be modified through the negligence of
the workers on the jobsite.
Spirex continuous stirrup with vertical
arms cannot open during an earthquake,
as the traditional stirrup can (particularly
in a pillar).
Schnell SpA – Italy
Website:
Sikora AG
Booth H3 J25
Sikora AG will present its range of
measuring and control equipment for
the wire and cable industry, including
the Centerview 8000 with its 8-point-
eccentricity and ovality measurement,
patent pending cloud diagram and
several improvements regarding precision
and long-life-cycle.
Also present will be the X-Ray 8000 NXT
for eccentricity, wall thickness, ovality and
diameter measurement of MV-, HV- and
EHV- cables in CCV-, VCV- and MDCV-lines,
and the X-Ray 2000 series, suitable for the
measurement of diameter, wall thickness,
eccentricity and ovality on insulating and
jacketing lines.
The Laser series, for an accurate diameter
measurement, completes the product
range.
Sikora AG – Germany
Website :
Sinoleader Industries
Group
Stand B16
Sinoleader Industries Group Co Ltd was
established in 1990 with its headquarters
based in Shanghai.
Sinoleader is a large group involved in
the design, manufacture, installation,
commission, maintenance and after
service of all types of wire and cable
machinery.
Sinoleader Industries Group Co Ltd –
China
Website :
Solvay Padanaplast SpA
Booth B26
Solvay Padanaplast SpA is a developer
of ambient-curing environment-friendly
crosslinkable materials for wire and cable
insulation and sheathing, ready-for-use
on standard extrusion lines.
The product range includes:
Cogegum • ® GFR/365 and GFR/370
crosslinkable compounds with high
oil, fuel and chemical resistance for
sheathing and insulation
Complete wire-flattening line ▲ ▲
Continuous spiral reinforcement from Schnell ▲ ▲
Sikora’s X-ray 8000 NXT for use in high voltage ▼ ▼
cable production
Sinoleaders’ headquarters based in Shanghai ▲ ▲