Technology News
108
M
arch
2014
Hall 7A | F14
07.–11.04.2014
Competence in
tube measurement
Improve your
product quality!
IMS measuring systems
are designed for online,
non-contact operation in
the measurement of:
• single wall thickness
• mean wall thickness
• eccentricity
• inside profile
• thick ends
• diameter
• ovality
• outside profile
• length
• temperature
Your measurement
task is our
specialisation!
IMS Messsysteme GmbH
Dieselstraße 55 | 42579 Heiligenhaus | Germany | phone: +49 2056 975-0, fax: -140
|
Fittings for harsh environments
LIQUIDLINE and INOXLine push-
in fittings are designed for industrial
applications requiring the connection
and distribution of cooling water,
compressed air, gases and liquids. In
the search for a solution for especially
harsh production environments and
higher temperatures, Eisele decided
on a high-quality fixed pipe connection
that combines all the advantages of the
Eisele modular system.
For cooling water applications or
especially demanding and corrosive
industrial
applications,
Eisele
recommends the combination of
LIQUIDLine or INOXLine push-in fittings
with highly resistant ProWeld hoses. This
combination is suitable for use in extreme
conditions and at temperatures up to
100°C, but even this solution approaches
its limits in the case of increased abrasion
and wear from weld spatter, aggressive
cleaning agents, extreme heat, soiling or
mechanical stress.
Such conditions exist, for example,
in foundries, the semiconductor
industry or automobile manufacturing.
At temperatures above 100°C the
bursting pressure of hoses declines. The
advantage of pipes is that their pressure
resistance is virtually constant.
Standard systems from Eisele are
suitable for combination with pipes.
Customers can therefore use pipes
at temperatures up to 120°C, with the
flexibility and convenience of push-in
fittings. For stronger thermal loads, Eisele
fittings can be equipped with seals that
are designed for higher temperatures.
Metal pipes can be used wherever a
flexible connection is not needed. At high
temperatures and unfavourable ambient
conditions, a pipe connection is even
more economical than a hose connection
in the long run.
Eisele delivers push-in fittings with
diameters from 4 to 20mm, which also
makes the concept suitable for the main
air supply in machine construction.
This type of compressed air connection
requires little maintenance and offers
a long service life. The optimised
fitting geometry ensures high flow
rates. Depending on the particular
application, different seal materials such
as FPM, EPDM or NBR can be used.
The advantage of push-in fittings over
compression ring fittings is that they allow
faster connecting and disconnecting.
Eisele offers the option of using
pipes instead of hoses especially
for the LIQUIDLine fittings made of
dezincification-resistant
brass
and
INOXLine fittings made of stainless steel.
The application parameters are based on
the respective product series. Series 17
and 26 with a seal on the push-in fitting
can withstand pressures up to 16 bar,
while series 17a and 24 with a double
O-ring seal achieve an even better leak-
proof seal, making them suitable for
higher pressures.
Eisele Pneumatics GmbH & Co KG
–
Germany
Fax: +49 7151 1719 17
Email:
Website:
