Side-Shooter 16/24 Tenders
Willmar’s 16 ton (14,545 kg) and 24 ton (21,818 kg)
side-shooting tenders can be either truck or trailer mounted*
and can move up to two tons of material a minute. Contribut-
ing to that efficiency are four or six compartment hoppers that
can carry a variety of materials; steep, 40 degree, sloped sides
for quick material dispensing; large-diameter, 10-inch (25.4
cm) augers and big hydraulic capacity.
Loads of capacity.
The 16-ton version holds an incredible 516
ft
3
(14.6 m
3
) struck and 578 ft
3
(16.38 m
3
) heaped while the
24-ton weighs in with a struck capacity of 774 ft
3
(21.9 m
3
)
and 867 ft
3
(24.6 m
3
) heaped. Two stainless steel, gate control
handles facilitate easy hopper unloading and a wide-mouthed
bottom dump gate accommodates pit unloading.
There are separate controls for on/off horizontal and side
discharge, fold/unfold and raise/lower auger control. The
one-piece, adjustable, swingaway auger engages with a
spring-loaded back to eliminate spillage. The hydraulic drive
with PTO-powered pump has a large, 25 gallon (94.6 L)
hydraulic oil reservoir so you’ll always have power when you
need it.
*46,000 pound (20,909 kg) gross volume weight (GVW) truck or trailer require-
ment, depending on model.
Trailer by Behnke Enterprise, Inc.:
• Main frame: 16" 26 lb I-Beam fifth wheel
• Capacity: 45,000 lb GVWR
• Axle: (1) 22,500 lb oil bath heavy duty axle with anti-lock air
brakes, automatic slack adjusters, and park brake
• Wheels: (8) 22.5 x 8.25" Budd style dual wheel with
10 on 11.25"
• Tires: (8) 255/70R-22.5 Bridgestone tire
• Hitch: King Pin, 48" clearance, 2" SAE with
⅜" bolster plate
• Lighting: DOT approved, all sealed rubber mounted
Rear Discharge Tender
Willmar’s truck-mounted* 10 and 16 ton rear discharge tenders
are ideal for commercial fertilizer dealers, custom applicators,
and large farming operations.With two large-capacity hoppers
that feed into one auger, these tenders can carry nearly any sin-
gle, dry-material product and load any applicator or planter at
up to two tons per minute.
30° minimum hopper slope for the 1600 and 40° for the 10
ton model allow for fast material flow and cleanout.
Discharge rates range from 2,400 pounds (5,280 kg) of urea
per minute to 4,000 pounds (8,800 kg) of potash per minute.
The standard auger is 10 inches (25.4 cm) in diameter by 19
feet long (5.8 m) with a discharge height to 117.5 inches (2.98
m). A 21 foot long (6.4 m) auger with 117 inch (2.97 m) dis-
charge height is also available.
Auger on/off controls and raise/lower controls are lo-
cated on the left rear corner of the tender. The self-con-
tained hydraulic system is PTO-driven and has a 10 gallon
(37.85 L) reservoir.
*32,000 pound (14,515 kg) or 40,000 pound (18,144 kg) gross volume weight
(GVW) truck requirement.
16 ton side shooter tender.
1600 rear discharge tender.
24 ton side discharge tender on a B-B trailer by Behnke Enterprises, Inc.
EQUIPMENT
13
TENDERS