44 / 136
44
SWISS
CNC
MULTI-
SPINDLE
DAVENPORT
BROWN &
SHARPE
BROACHING
ADJUSTMENT FREE INTERNAL ROTATING BROACH TOOLS FOR SWISS MACHINES
•
Shank can be cut to desired length
• Adjustment free
• No center indicating required
• Smaller head diameter eliminates interference
• Short head length for limited back work space
• Built in wobble cutting features 1° angle
• Fits most Swiss type & gang machines
• Setup gages available for these holders on page 50.
Hex, Square and Six Lobed broaches in
stock to fit these holders.
NOTE:
USE ONLY
8MM DIA X
28MM LONG BROACHES
(SHOWN ON PAGE 45)
CNC & SWISS ADJUSTMENT FREE
INTERNAL ROTARY BROACH TOOL HOLDER
CNC LATHE, ADJUSTMENT FREE, INTERNAL BROACH TOOL HOLDER
Introducing a wobble broach tool that can be quickly setup for use in CNC lathes.
(Not for use on milling machines)
CONVENTIONAL CNC HOLDERS
CNC LATHE COLLET TYPE ADJUSTMENT FREE INTERNAL
BROACH TOOL HOLDER
NOTE: COLLET NUT, COLLET WRENCH, SPINDLE WRENCH AND STANDARD
HIGH PRECISION COLLET INCLUDED WITH EACH CAT. NO.
HAVE ALL THE SAME FEATURES AS THE COLLET CHUCK
STYLE HOLDERS LISTED ON PAGE 43
CAT. NO.
A B C D E F G
ORB00-CNC
5/8 1-1/2 1-59/64 1-1/2 2-7/16 .315 9/16
ORB0-CNC
3/4 2"
2-17/32 2-3/8 3-5/16 .500 .742
ORB2-CNC
1"
2"
2-17/32 2-3/8 3-5/16 .500 .742
ORB3-CNC
1-1/4"
3"
2-17/32 2-3/8 3-5/16 .500 .742
ORB4-CNC
1-1/2"
3"
2-17/32 2-3/8 3-5/16 .500 .742
NUT COLLET COLLET
CAT. NO.
A B C DIA. I.D. (std) MAX. CAP.
ORB00-AF 5/8"
2" 2-11/16" 22MM .315 13/32"
ORB0-AF 3/4"
2"
3-5/8" 1.348 .500 13MM
ORB2-AF 1"
2"
3-5/8" 1.348 .500 13MM
ORB3-AF 1-1/4" 3"
3-5/8" 1.348 .500 13MM
ORB4-AF 1-1/2" 3"
3-5/8" 1.348 .500 13MM
CAT. NO.
A
ORBSWS-10MM 10MM
ORBSWS-12MM 12MM
ORBSWS-14MM 14MM
ORBSWS-16MM 16MM
ORBSWS-20MM 20MM
ORBSWS-22MM 22MM
ORBSWS-25MM 25MM
ORBSWS-625
.625
ORBSWS-750
.750
ORBSWS-1000
1"
• Adjustment free holder for CNC lathes (not for use on milling machines)
• RequiresX-Axismachine adjustment only for broach lengths other than the
standard designated lengths of 1.250" oal for ORB00 holders and 1.750" oal
for ORB0, ORB2, ORB3 & ORB4 holders.
• No center indicating required
• Hex and square broaches in stock for these holders starting on page 45.
• Setup gages available for these holders on page 50.