7 / 136
7
SWISS
CNC
MULTI-
SPINDLE
DAVENPORT
BROWN &
SHARPE
RESHARPENABLE QUICK CHANGE SHAVE TOOL HOLDERS FOR
DAVENPORT MACHINES
(Patent No. 5,848,562)
THE ONLY QUICK CHANGE SHAVE TOOL INSERT THAT CAN BE RESHARPENED WITHOUT AFFECTING ITS ORIGINAL:
• CENTER SETTING • PART DIAMETER SETTING • LATERAL SETTING
• CAN ALSO BE USED WITH RESHARPENABLE OR THROWAWAY INSERTS • IDEAL FOR DATUM POINT APPLICATIONS
PATENTED DESIGN CLAMPS INSERT
FORWARD AGAINST HOLDER FACE.
Insert always located on roll
centerline.
Maintains part diameter and
lengths even after resharpening.
AT LAST.... A SHAVE TOOL WITH ALL THE FEATURES YOU ALWAYS WANTED:
Adjustable dovetail gib eliminates
chatter due to normal wear.
Lateral fine adjusting screw.
Shaving head can be moved sideways.
without moving shank or toolholder block.
Simplifies alignment with roughing tools.
EASY TO GET AT FROM THE SIDE CLAMPING OF INSERT.
Insert can be changed in less than a minute.
Single hex wrench adjustment for clamping and
unclamping of inserts.
Swing away side plate for easy insert replacement.
spring tension adjustable to suit
size of workpiece.
*
CENTERLINE OF SHAVE HEAD OFFSET 1/8" FROM CENTERLINE OF SHANK
FOR USE WITH SLITTERS OR SLATER ADAPTER BLOCKS OR STC-DVAB-3
BLOCK SHOWN BELOW.
SHAVING HEAD PRESETTABLE FOR DIAMETER OFF THE MACHINE.
Shave tool roll head easily removable from body.
Settings not affected because shank and body of shave.
tool holder remain clamped in machine.
Easy one screw clamping locks head in place.
Simplifies diameter setup of holder when changing jobs.
RESHARPENABLE QUICK-CHANGE
DAVENPORT SHAVE TOOL HOLDERS
• MOUNTING HOLE FOR 1" DIAMETER SHANK
• FINE PITCH SCREWS FOR EASIER TAPER ADJUSTMENT
• HEAT TREATED ALLOY STEEL FOR DURABILITY
FOR RQCDS-A SHAVE TOOLS
- OR -
ANY SHAVE TOOL WITH SHANK THAT
IS ON CENTER WITH MACHINE SPINDLE
Ref 711-229A
SECOND POSITION
ADAPTER BLOCK
Cat. No. STC-DVAB-2
Ref 711-313S
THIRD POSITION
ADAPTER BLOCK
Cat. No. STC-DVAB-3
To be used with
Davenport Tool
Arm #5080-64-1
FOR RQCDS-SL SHAVE TOOLS
- OR -
SLITTER/SLATER SHAVE TOOLS
THAT ARE 1/8" OFF CENTER
SHAVE TOOL ADAPTER BLOCKS FOR DAVENPORT MACHINES
OFFSET ROLL CARRIER AVAILABLE
FOR WORKING CLOSER TO SPINDLE
.
CAT. NO. RQCDS-C-3
PIPE THREAD COOLANT CONNECTION
•
MOUNTS ON SWING ARM-SAME AS CIRCULAR TOOLS
•
ALL FEATURES SAME AS above SHANK TYPE shave tool
•
CAN BE ROTATED TO CENTER SAME AS CIRCULAR SHAVE TOOL HOLDERS
•
ADJUSTABLE FOR PART TAPERS
SHAVE TOOL HOLDERS FOR DAVENPORT CIRCULAR POSITIONS
(Patent No. 5,848,562)
Cat. No.
RQCDS-C
USES 1-1/8 X 3/8 INSERT BLANKS SHOWN ON PAGE 12
SEE PAGE 12
FOR INSERT BLANKS.
CONVERT YOUR RQC SHANK TYPE SHAVE TOOL HOLDER (SHOWN ABOVE)
TO A CIRCULAR SHAVE TOOL HOLDER (SHOWN BELOW) WITH THIS PART;
CAT NO.
RQCDS-C-MOUNT
INSERT
CAT. NO.
STYLE CAPACITY SIZE SHANK
RQCDS-A A
0-7/8"
1-1/8 X 3/8 1"
*
RQCDS-SL A
0-7/8"
1-1/8 X 3/8 1"
RQCDS-DV A
0-7/8"
1-1/8 X 3/8 1-1/8"
QUICK CHANGE
FORM / SHAVE