26 / 56
26
NOHASSLE
WARRANTY
BEST PRICE
PROMISE
0845 603 3636
OVER 200 BRANCHES NATIONWIDE
†Finance example typically based on a 5 year lease purchase agreement. Finance subject to status, full terms and conditions available on request. Other finance options available. All prices exclude VAT at 20%. Price, availability and specification may change without prior notice.
Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Offers valid until 30th June 2016. Prices correct at time of going to press: April 2016.
2 Post Lifts
Two post lifts are the most cost-effective way to raise a vehicle allowing technicians access most areas of the vehicle. We offer an extensive range
and the differences can be easily over looked if when comparing lifting capacity and price.
Before you making a decision, consider it as an investment and not a cost. Upgrading now can potentially save hundreds over the life of the lift.
TYPE OF WORK
Points to consider that can affect the productivity in the workshop, base
frame lifts do not offer the same convenience as having a clear floor but
can be a cheaper option in the short term
• Base frame / H Floor plate setup offers extra support for some
floors, restricts access for low vehicles, can be an obstruction for
other equipment, oil drainers, transmission jacks etc.
• Baseless / Clear floor setup has no ‘bump’ between the posts to
negotiate when manoeuvring transmission jacks and oil drainers
into position. Ideal non-runner vehicles, clutch work and vehicles
with spoilers
• Mechanical Locks – Requires the lift to go up before it can come
down past a lock, this is restrictive during engine or gearbox work,
consider a mechanical screw type
RANGE OF VEHICLES
Lifting capacity is a major factor and it’s advisable to always go for more
than you think you need, rating can change significantly with the position
of the arms
• Drive-through Width – extra width allows greater access less
struggling in an out of the vehicle and increased range of cars
and light commercials
• Minimum pad height – the minimum clearance required
to position the lift arm underneath the car, essential for
servicing sports cars
• Asymmetric arms design allows for greater door access for
vehicles – but the vehicle can only have a ‘drive in’ approach.
• Symmetric arms design offers more flexibility on chassis lengths
and allows drive in or reverse on approach. Centred lifting
position will often put the doors opening in the way of the posts
PHYSICAL LOCATION
Our dedicated team will be happy to discuss any your needs. The basic
floor requirement is always the same; level with no cracks, and suitable
concrete depth.
• As a guide, level with a minimum concrete of 150mm for lifts with
a base and 220-250mm for baseless
• Single Phase / Three Phase motor – 3ph are more efficient under
load, 1ph offers flexibility
• Overhead height – the height of the vehicle above the posts,
gantry height for baseless cables
• Consider moving existing lifts to create more overall space, re
organising the workshop at the time of installing a new lift often
increases the total efficiency
COST OF OWNERSHIP
As with any machine, usage will have a bearing on the lifetime cost
of ownership. The operation of the lift can also affect the cost in time,
sometimes over looked until it’s installed and too late
• Mechanical operation lifts are said to require less maintenance,
and therefore offer less operational ‘down time’
• Electro-Hydraulic lifts use 50% less electrical consumption
because the lowering operation is controlled simply by releasing
the hydraulic pressure rather than by operating the motor.
• Warranty – the length of warranty cover can have a big effect
on the lifetime cost
• Speed – simple convenience, the raising and lowering time
on some lifts is half that of others.
• Manual Lock Release Mechanism – Some manual locks have
to be released from both sides. This means walking around
from one to the other side of the lift every time prior
to commencing lowering.
SAFETY SERVICE AND MAINTENANCE
Don’t wait for the inspection, to keep your lift in a good condition you
will need to check it regularly intervals. Keep all moving parts lubricated.
It is good practice to keep the lift area free from any debris which may
find its way into the lift mechanism.
SERVICE
• Service your lift according to the manufacturer’s recommended
intervals to ensure your warranty remains valid not all
manufacturers are the same
• Check if there is a stipulation by your insurance provider
for service and safety inspections
• Use only a GEA accredited service engineer and maintain
your records
• Consider extended warranty or an ongoing service contract –
we can quote
• Safe operation of the lift is imperative and is the responsibility
of the operator
• Ensure the vehicle balance is correct by just raising the vehicle
just off ground level before taking the lift up to operational height
Selecting the right 2 post lift