eCatalogue General 80515

20-21 / 47

FuelEquipment .com
Custom fuelling solutions
FUELLINGSystems & Equipment
Australian Australian Fuelling Systems & Equipment
PO Box 7162 NEMSC 2348 7-11 Armstrong Street Tamworth 2340
Ph: +61 2 6760 7816 Fax: +61 2 6760 7826
www.fue 20
FuelEquipment .com
Custom fuelling solutions
FUELLINGSystems & Equipment
Australian Australian Fuelling Systems & Equipment
PO Box 7162 NEMSC 2348 7-11 Armstrong Street Tamworth 2340
Ph: +61 2 6760 7816 Fax: +61 2 6760 7826
www.fue 21
Hose Reels
$499.00 + GST
$1199.00 + GST
$839.00 + GST
$15.00 + GST
$50.00 + GST
Macnaught MDTP2520 Diesel Reel
SKU 113301 Piusi Automatic hose
reels for diesel and oil have been de-
signed to ensure high efficiency.
The sturdy structure can guarantee
best performance also in heavy duty
conditions.
Features:
- Reduced pressure loss
- Corrosion resistant: structure made
of stainless steel
- Easy and versatile installation
through the rotating support plate and
the adjustable arm positions
- Hose stop
- Safety: lateral protective covers
SKU 113303 Piusi Automatic hose
reels for diesel and oil have been
designed to ensure high efficiency.
The sturdy structure can guarantee
best performance also in heavy duty
conditions.
Features:
- Reduced pressure loss
- Corrosion resistant: structure made
of stainless steel
- Easy and versatile installation
through the rotating support plate and
the adjustable arm positions
- Hose stop
- Safety: lateral protective covers
SKU 110101 Macnaught MDTP2520-
01 Diesel reel - spring-rewind
Heavy-duty reel ideal in truck mount &
mine applications
Fitted with 20m x 25mm i.d. hose
Operating pressure up to 3,500 Kpa
(500 psi)
Maximum operating temperature 60°C
1” BSP(F) reel inlet and 1” BSP(M)
hose outlet
Wall / floor mounting bracket integral
to the reel design
20m x 25mm hose fitted
10m x 25mm
hose fitted
Bare
No hose
CimTek Tank Dryer
SKU 1530117 Cim-Tek Tank Dryer
Absorbs water from the bottom of your fuel tank, contains super-absorbent
polymer. Tank opening diameter 2” or over
Instructions:
1. Extinguish cigarettes or any other flammable material before opening fuel
tank.
2. Be sure diameter of the tank opening will allow the Tank Dyer to be put into
and removed from tank easily.
3. Hold the cord and lower the Tank Dryer into the tank.
4. Be sure the cord will allow the Tank Dryer to lie flat on bottom of tank. (This
is where the water will be.) Shorten cord to remove excess slack.
5. Attach the retrieval cord to allow fuel cap to be replaced, but be available to
remove the Tank Dryer when it is full. (Note: The best place to attach the cord
is on the underside of the fuel cap.)
6. When the Tank Dryer starts to absorb water, it will expand. Until this condi-
tion occurs it may remain in the fuel tank, but should be checked in an hour.
**The Tank Dryer should be checked weekly and removed when swollen.
7. Install the Tank Dryer so you don’t obstruct the fuel outlet or sending unit.
Important Note: alcohol-based fuel additives designed to disperse water will
reduce the effectiveness of the Tank Dryer.
NOT FOR USE WITH ETHANOL BLENDS.
SKU 223055 CIM-TEK Pre-Vent Tank Cap
The Pre-Vent pressure cap is a Cim-Tek® orginal patent design for use
on small above ground farm tanks, commercial gasoline tanks, distil-
late tanks, fuel transfer tanks, small oil storage tanks, and industrial oil
transfer tanks. The Pre-Vent helps to maintain fuel quality by reducing
condensation and evaporation loss. It’s designed to divert rain and con-
densation away from the fill hole. A lockable design option is available
with the Pre-Vent II pressure cap.
60002 Cast-Iron Base with Plated Cap Featuring Security Anti-Theft Arm.
Base
Cap Assembly