254 / 578
PLANNING AID
3-circuit track
T-Connector 1 - Bent
#722270U/71U/74U
Feed-In 1 “Left”
#722190U/91U/94U
T-Connector 2
#722280U/81U/84U
L-Connector
#722250U/51U/54U
L-Connector - Bent
#722250U/51U/54U
X-Connector
#722260U/61U/64U
Feed-In 2 “Right”
#722220U/21U/24U
L-Connector - Bent
#722250U/51U/54U
Feed- In 1 “Left”
#722190U/91U/94U
L-Connector - Bent
#722250U/51U/54U
L-Connector - Bent
#722250U/51U/54U
T Connector 1
# 722270U/71U/74U
X-Connector
722260U/61U/64U
T-Connector 2 - Bent
#772280U/81U/84U
T Connector 2 - Bent
#722280U/81U/84U
X-Connector
#722260U/61U/64U
T Connector 1
# 722270U/71U/74U
Feed-In 1 “Left”
#722190U/91U/94U
L-Connector - Bent
#722250U/51U/54U
Feed-In 1 “Left”
#722190U/91U/94U
These are plan views as a designer looks down from above. There is a raised
polarity ridge on the bottom of the track sections.
The red lines indicate the polarity ridge. The polarity must be consistently
maintained throughout a track layout. The examples below show the polarity
ridge of the track and the connectors used to keep the polarity ridge
consistent throughout the layout.
3-CIRCUIT TRACK
254