Tel
0870 122 8822
Fax
0870 122 8282
Online search, specify & CAD:
www.thebluebook.co.ukCI/SfB
(74)
April 2014
Uniclass L721
5 : 18 : 1 : 3
Index
ideal Standard / ARMITAGE SHANKS
Index
F
I
Fast fix bracket
Easy to fit wall mounted bracket for bar
shower valves. Saves time and cost.
First fix connection kit
Provides a rigid fixing foundation for built-in
mixing valves on stud partition walls.
Free flow waste
For basins without an overflow where the
taps might be left running. Prevents any
chance of flooding.
Flow regulator
Factory fitted to save water on either the outlet
of basin mixers and the inlet of pillar taps.
Fixed overhead shower
An overhead shower head fitted to the wall
or ceiling in a fixed position.
Flow restrictor
A device within a basin or bath fitting which
reduces water flow in order to save water.
Floor Standing
WC suites or bidets where the base fixes to
the floor.
Flush bend
A flush bend is used to connect low level,
back-to-wall and wall mounted WC pans to
the cistern.
IdealClean finish
Finish applied to shower enclosures so the
glass is easier to clean and stays clean for
longer.
Idealfil
Bath spout combined with pop-up waste.
Hot and cold handles mounted remotely
within easy reach.
Idealform
Baths moulded from high quality acrylic sheet
- warm to the touch and gives exceptional
insulation.
Idealform Plus+
All the benefits of Idealform with double the
reinforcement for extra strength and rigidity (no
creaking).
Idealcast
Superior bath construction - the strength of
cast iron with just half the weight. Minimum
thickness 8mm.
H
L
M
High pressure installations
Minimum of 1 bar, but is often greater.
Horizontal adjustment
The shower enclosure profile can be adjusted
horizontally to allow for out-of-true walls.
Horizontal and vertical adjustment
Enclosure profile adjustment that allows for
fixing into grout lines rather than onto tiles.
High level WC
The cistern with a pull chain is fitted on the
wall at high level near the ceiling.
Low pressure gravity fed system
Gravity fed hot water depends on the height
of the cold water tank (usually in the loft).
Multiport
Delivers reliable, efficient water flow on low
pressure systems - also available for 1 hole
bath fillers.
Manual Mixer Shower
Does not compensate for variations in
hot and cold water flow rate, pressure or
temperature.
Mixer fittings
Hot and cold water are mixed in the body
of the fitting and delivered through a single
spout.
Low level WC
The cistern is mounted on the wall at low
level with the operating lever at hand height.