112 / 136
Coil Spring Compressor
(Wishbone Suspension)
⊲⊲
For wishbone, independent and multi-link suspension systems
⊲⊲
Restricted access: Suitable for springs where the lower wish bone access hole is
30mm or bigger (tool shaft size 29mm). Maximum load 3800kgf (37,240N)
⊲⊲
Suitable for use with air impact tools when using the torque limiting bar provided.
⊲⊲
Also complete with two forged steel pressure plates
150mm & 130mm, Manufactured from steel and Chrome
Molybdenum
⊲⊲
Access problems mean that often a traditional coil spring
compressor cannot be used on some applications.
However, if access is possible from the bottom of the spring,
then the dimensions of this new coil spring compressor from
Laser Tools (part no: 5931) will allow fitment through lower
wishbone holes as small as 30mm in diameter.
⊲⊲
To be used when the spring is fitted independently of the
suspension damper (wishbone, independent and multi-link
systems), the vehicle applications include Chrysler, Citroën,
Ford, Honda, Kia, Mercedes Benz, Mitsubishi, Peugeot,
Renault, Seat, Skoda, Suzuki, Toyota, Volvo, VW, BMW 3
series (1996-2013) Mercedes Benz W202/W204 (1997-2013).
⊲⊲
A major timesaver is the fact that the compressor is suitable
for use with air impact tools when using the torque limiting
bar provided in the set.
538 77 6381
£119
.99
STEERING AND SUSPENSION
MOT Suspension Inspection Tool
⊲⊲
This tool tests for movement and wear in
suspension components such as ball joints,
bearings and bushes.
⊲⊲
Lower the road wheel on the roller bar using a
breaker bar to rock the road wheel to highlight
any movement.
⊲⊲
Ideal for use on a 4 post
MOT ramp
538 77 6061
£24
.99
Steering Rack Knuckle Tool
⊲⊲
Fast and easy removal and installation
of the steering knuckle
⊲⊲
Fit over the steering shaft onto the
steering rack
⊲⊲
Fits racks with hex drive, two flats and
round ends with a diameter
of 35-42mm
538 77 4040
£34
.99
112