Jantz Catalog 51

112 / 114

PAGE 112 PRICES SUBJECT TO CHANGEWITHOUT NOTICE
HEAT TREAT
Simple to use;
place blade or
other part in the
Tool Steep Wrap;
fold over and crimp
edges forming an
air tight package;
place package in
oven and heat treat
according to metal directions. Placing a small
chip of wood inside the foil packet helps to
burn up oxygen inside the wrap. Use only
once. Cuts easily with scissors.
★ 1-800-351-8900 ★ JANTZ SUPPLY
Sold in box of .002" x 12" x 25'.
CAT.# DESCRIPTION PRICE
KF321 1900˚ 321 Heat Treat Foil 47.95
KF309 2200˚ 309 Heat Treat Foil 64.95
Evenheat Knife Ovens are equipped with the
easy to use Set-Pro Temperature Control,
you can control up to 8 separate temperature
points per firing. With features like 3 button
operation, “Full Power” settings and a Skip
function. Store up to 4 individual programs
each capable of holding up to 8 segments.
Control the rate of increase as well as the rate
of decrease, also has a “hold/soak” time for
each of the set point temperatures in each
segment. Adjust the time and temperature in
increments of 5 degrees and 5 minutes while
your program is running without the need to
stop and restart. You can skip to the next
segment if you find your current process is
finished before you anticipated. Available
in four sizes, all models measure 10" width
x 6.5" height inside chamber. Maximum
temperature is 2200 degrees F.-all are 240
volt, single phase. Actual shipping charges
apply. Allow 14 days for shipping.
CAT.# DEPTH SHIPWT. PRICE
KF135 13.5" 70 LBS 968.00
KF180 18.0" 100 LBS 1004.00
KF225 22.5" 110 LBS 1047.00
KF360 36.0" 160 LBS 2075.00
The Ultimate Heat Treating Furnace for Knife
Makers. All are equipped with a simple to
master SENTRY 12 key electronic temperature
controller, which displays messages to guide
you through each step in entering correct
parameters for each job. A segment heats to
a given temperature (max 2000˚ F) and rate,
holds for as long as needed. You can enter
up to 18 segments. Control both heating and
cooling with accuracy and repeatability. Store
up to 4 programs in memory, one for each type
of steel you regularly treat. The large display
shows temp throughout heating and cooling
process. A delay feature turns the furnace on
after a specified period. The alarm sounds
when a programmed temperature is reached.
Available in 3 sizes KF514 is 120 volt, 10 amp,
1200 watts, KF524 is 240 volt, 7.5 amp, 1800
watts, the KF536 is 240 volt, 11 amp, 2700
watts. All are 5.5" wide and 4.5" high. All
dimensions are inside chamber measurements.
Actual shipping charges apply. Allow 14 days
for shipping.
CAT.# DEPTH SHIPWT. PRICE
KF514 14.5" 100 LBS 1094.00
KF524 24.0" 140 LBS 1340.00
KF536 36.0" 190 LBS 1523.00
This kit contains all of the handling equipment
you need to get started. No matter what oven
you choose, you will want to add this kit so
everything will be ready for your first heat
treating experience. Includes Hot Mill Gloves
(withstands up to 500°F.), heat treat fork, two
knifeholders and four firebrick supports.
CAT.# DESCRIPTION PRICE
KF603 Heat Treat Accessory Kit 69.95
KF621 Heat Treat Fork 24.95
KF632 Knifeholder (each) 9.95
KF631 Firebrick support (each) 4.95
KF644 Hot Mill Gloves size 10 19.95
These gloves use a 22 oz Aluminized Thermonol
coating to reflect 95% of the radiant heat from the
back of the hand and arm. The palm material can
withstand intermittent handling from 800 to 1000
degrees F. These 14" gloves are lined with 11 oz
wool and use a Kevlar thread for the stitching.
Made in the USA.
CAT.# DESCRIPTION PRICE
KF645 Aluminized Heat Resistant Gloves 79.95
Keep the heat away
with these 14"
gloves are lined
with 11 oz wool and
have a specialized
coating of 35 oz
highly textured silica yarn treated to withstand
temperatures up to 2000 degrees F. The outer
material dissipates heat across the surface of the
fabric. The fabric is made of inorganic materials,
so it won't smolder or produce hazardous
outgasses.
CAT.# DESCRIPTION PRICE
KF646 Heat Protection Gloves 79.95
CAT.# DESCRIPTION PRICE
KF688 MK1 Blade Fixtures 22.95
KF689 MK2 Blade Fixtures 29.95
Evenheat Blade Fixtures are designed to hold
your blades vertically and securely. They're
well designed and provide ample space for
foil inflation while being absolutely stable.
The KF688-(5"x5"x2") is used in our KH Series
(120vt) and the KF689-(7"x7"x2") is used in our
KF Series (240vt).
CAT.# DESCRIPTION PRICE
KF901 Heat Treating Tongs 39.95
Manufactured from special low carbon steel for
lasting strength. Will not become brittle when
quenched in water. The tongs are 15" overall.
Equipped with
insulated doors
on both ends
for easy entry
and removal of
Damascus billets.
Comes fitted for
propane, but can
be configured
for natural gas.
Regulator and
Hose included,
operates off a
standard 20lb
propane tank, the
same type used
for barbecue
grills. Reaches
2350 degrees. The heat Chamber is 4" x 4
1/2" x 13 1/2". Exhaust port on one door is
3" x 2". Ship weight is 48 lbs. Actual shipping
charges apply.
CAT.# DESCRIPTION PRICE
NC111 Knifemaker Forge 559.95
Quality alloyed castings, our 70 lb. anvil is
precision milled and heat treated. A 3 1/2" x
11" face and 4" x 8" horn. Perfect for forging
Damascus.
Actual shipping charges apply on the Anvil.
Hammers are perfectly balanced. One end
round, crowned face, other is flat and beveled to
reduce the possibility of chipping.
CAT.# DESCRIPTION PRICE
NC207 Forging Anvil 274.95
CAT.# DESCRIPTION PRICE
NC770 1 1/2 lb. Hammer 49.95
NC772 2 lb. Hammer 49.95
The optional Rampmaster Control offers 12
settable programs, numerical keypad and
alarm function. The KF010 is the option to
exchange one of the Evenheat ovens from Set
Pro Control to the Rampmaster Control at the
time you are ordering an oven.
CAT.# DESCRIPTION PRICE
KF010 Rampmaster Control Option 90.00
Heat Treating Foil
KF Series 240 v
Blade Fixtures
Heat Treat Accessories
Aluminized Gloves
Heat Protection Gloves
Heat Treating Tongs
KF689
KF688
NC Tool Knifemaker Forge
Forging Anvil
Forging Hammers
Rampmaster Option