83 / 114
PAGE 83
PRICES SUBJECT TO CHANGEWITHOUT NOTICE
MEASURING
JANTZ SUPPLY
★
1-800-351-8900
★
WWW.KNIFEMAKING.COMHas two vials at right angles for cross test
leveling and a plumb level at the top for
checking squareness.
Made in the USA.
CAT.#
SIZE DESCRIPTION PRICE
ST134
2" x 3" x 1/2"
Level
45.00
Spirit level in square and protractor head,
direct reading double 180 degree protractor
scale, tempered satin chrome 12" blade.
Protractor turret with cast heads and black
wrinkle finish.
Made in the USA.
CAT.#
DESCRIPTION PRICE
STC9124R
12" Square with 3 Heads
216.00
Satin chrome finish on sleeve and thimble.
Quick-reading figures on thimble with every
thousandth numbered; convenient decimal
equivalents, too. Micro-lapped finish on
carbide anvil and spindle faces. Smooth
friction thimble for uniform pressure. Accurate
measuring and repeatability. Extremely hard
and stable one piece spindle.
Made in the USA.
CAT.#
RANGE GRADUATION PRICE
STT436FL1
0-1"
.0001"
123.00
STT436FL2
1"-2"
.0001"
145.00
Sensitive, reliable and easy-to-read. With its
three hardened contact points, the Universal
Dial Test Indicator adjusts to any angle.
Graduated in .001 dial reads 0-100 with a
range of .200. Set comes with points C, D,
and E. Plus four attachments (a) clamp with
5/16" rod, (b) tool post holder with 5/16" rod,
(c) snug complete for attaching (a) or (b) to
dial test indicator, and (e) hole attachment.
All in a fitted case.
Made in the USA.
CAT.#
DESCRIPTION
PRICE
ST196A1Z
Indicator in Case w/points
218.00
Satin chrome finish rules. 6" rule is approx.
3/4" wide and 3/64" thick.
Made in the USA.
CAT.#
DESCRIPTION
PRICE
STC604R6
6" Rule
21.56
The only dial caliper made in the USA.
Full
six inch range, four-way stainless steel dial
caliper with knife edge contacts for inside
and outside measurements. Readings taken
directly from the bar and dial indicator.
Measurements with one hand, thumb roll for
fine adjustment. Knurled thumb screws lock
the moveable jaw and adjustable indicator
dial at any setting. English model dial
indicator graduated .001" with .100 range per
revolution. Case included.
CAT.#
SIZE BAR GRAD.
PRICE
ST120Z6
6"
.100"
181.09
Shown with Optional Attachment
Am. Nat. — U.S. 60° Std. has scale graduated
in 14ths, 20ths, 24ths and 32nds for finding
number of threads per inch. Table of double
depths of threads for determining size of tap
drills. All gaging surfaces ground.
Made in the USA.
CAT.#
DESCRIPTION
PRICE
STC391
Center Gage Only
21.56
ST392
392 Attachment
14.00
Used in milling machines and drill press to
locate the edge and centers of work pieces.
Has a .500" body and contact body with
center to find edges and locate center lines
and scribed lines on one end with a .200"
contact body on the opposite end to find
edges.
Made in the USA
BODY CONTACT
CAT.# DIAMETER DIAMETER PRICE
ST827B
.500"
.200/point
27.00
Points are carefully ground to correct taper to
give sharp impressions.
Made in the USA.
DIA. AT TOP
DIA.
CAT.# OF TAPERED POINT OF BODY PRICE
ST816B
3/32"
19/64"
7.50
Points are ground to proper angle for
maximum service.
Made in the USA.
DIA. AT TOP
DIA.
CAT.# OF TAPERED POINT OF BODY PRICE
ST117A
5/64"
9/32"
5.75
ST117B
3/32"
19/64"
5.75
ST117C
9/64"
5/16"
5.75
ST117D
5/32"
3/8"
5.75
Set of Eight in round box.
Hardened, highly polished with a knurled
finger grip.
Made in the USA.
CAT.# DIA. PUNCH DIA. BODY PRICE
ST565A
1/16"
19/64"
5.00
ST565B
3/32"
19/64"
5.00
ST565C
1/8"
19/64"
5.00
ST565D
5/32"
19/64"
5.00
ST565E
3/16"
5/16"
5.00
ST565F
7/32"
25/64"
5.00
ST565G
1/4"
25/64"
5.00
ST565H
5/16"
29/64"
5.00
STS565WB
(1 of each size) in Box
51.00
STS565PC
(1 of each size) in Pouch
45.00
These punches automatically strike a blow
when downward pressure is applied. The force
of the blow is regulated by the adjustable
knurled cap. The point can be easily removed
for replacement. All sizes are identical in style
and differ only in the striking power.
Made in
the USA.
CAT.#
LENGTH DIAMETER PRICE
ST18AA
3 53/84"
7/16"
32.00
ST18A
4 13/18"
9/16"
36.00
ST2947
Point Only for 18AA, 18A
4.95
ST472 has 51 pitch ranges for gaging
American National and U.S. Standard 60°.
ST156M has 28 pitch ranges for gaging metric
threads. Each leaf stamped with number of
threads per inch.
Made in the USA.
NUMBER RANGE
CAT.# OF LEAVES OF THREADS PRICE
ST472
51 4 to 84 threads/in.
70.00
ST156M
28
.28 to 2.50 mm
39.00
Block is made from a steel forging and is
hardened and ground. Smooth finish on the
face preserves finish of work being held. Base
is recessed to make it light and yet strong.
Approximately 1 1/2" high and 3" diameter.
Holes vary in sizes from 1/8" to 5/8".
Made in the USA.
CAT.#
DESCRIPTION
PRICE
ST129
Bench Block
89.00
Cross Test Level
Combination Squares
Outside Micrometers
Dial Test Indicator Set
Spring Tempered Steel Rule
Dial Caliper
Center Gages
Edge Finder
Prick Punch
Center Punches
Drive Pin
Punches
Automatic Center Punch
Screw Pitch Gages
Bench Block