106 / 1618
1/88
Cutting Tools
1
Design:
With embedded and individually soldered carbide teeth. The drill also has an
integrated ejector aid for simple removal of the armouring from the drill body. The shank has
a thread for quick changeover between the armouring drill and hammer drill.
Application:
For use with SDS-plus ratio adapter, 100 % suitable for hammer drills. Ideal for
reinforced concrete with the usual building site armouring. The hammer drill hits armouring.
The armouring drill is used and the armouring drilled through. Then the hammer drill is used
again and drilling continues.
Note:
Only cut through armouring with authorisation from a structural engineer.
Order
No.
∅
mm
1266
Drilling depth
mm
Total length
mm
0120
12
97.70
190
230
0140
14
97.70
190
230
0160
16
118.00
190
230
0180
18
126.00
190
230
0200
20
129.00
190
230
0250
25
146.50
190
230
0280
28
150.50
190
230
0300
30
159.00
190
230
(W119)
RebarCutter armouring drill
Application:
For armouring drill RebarCutter (order no. 1266) and Ratio carbide hammer drill
(order no. 1276) in SDS-plus or SDS-max hammer drills.
Order
No.
Mandrel
1267
Length
mm
0010
SDS-plus
37.20
108
0020
SDS-max
37.20
185
(W119)
Adapter for Ratio Quick hammer drills
Design:
High drill bit with sturdy base and ground carbide teeth on all sides, which can be
sharpened. The clamping area is large and therefore ensures quick drill dust removal without
sticking. Drilling residues are also easy to remove. Max. drilling depth 65 mm.
Application:
Ideal for installation of sockets and junction boxes.
Torsion-free drilling
is
guaranteed and sockets are countersunk in one step due to the high and sturdy drill body. The
partially ground teeth prevent burning when drilling in wood. Suitable for a number of materials
such as aluminium, insulation, gas concrete, plasterboard, wood and sandstone. For use on
machines with SDS-plus and hexagon shank.
Order
No.
∅
mm
1275
Area of use
0680
68
33.90
Switch boxes
0820
82
43.60
Junction boxes
(W121)
Multi-purpose keyhole saw Allmat
Application:
Multi-purpose keyhole saw Allmat (order no. 1275).
Order
No.
Mandrel
1275
0050
Hexagonal
10.65
0055
SDS-plus
10.65
(W121)
Mount shank Allmat
Design:
Centre drill in sturdy design for fast and safe drill start on all surfaces.
To suit mount shank (order no. 1275).
Order
No.
∅
mm
1275
Length
mm
0010
8
4.80
100
(W121)
Centre drill Allmat
Adapters/drills/keyhole saws and accessories
106