Table of Contents Table of Contents
Previous Page  1447 / 1618 Next Page
Information
Show Menu
Previous Page 1447 / 1618 Next Page
Page Background

9/7

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Soldering/Welding/

Workshop Equipment

9

Design:

Certified gas-, dust- and waterproof safety lamp made of highly resilient and impact-

resistant polycarbonate with clip, non-conductive. The rubberised rear switch for single-hand

operation is hermetically sealed against the penetration of water and dust. There is also

protection against short circuit and incorrectly inserted batteries. ATEX Zone 1, certified,

II 2G Ex ib e IIB T4 Gb, working temperature -20 °C to +40 °C. Delivery with 2 micro

batteries AAA/LR03.

Order

No.

Luminosity

lm

9054

Lighting duration

h

Light range

m

Dimensions

mm

Weight

g

0201

30

24.50

ca. 10

35

142 x 22

40

(W596)

LED torch PX2

IP 68

Design:

Certified gas-, dust- and waterproof safety lamp made of highly resilient and impact-

resistant XAG plastic, conductive at high impedance. Additional protection against electrostatic

discharge (ESD), electromagnetic interference (EMI) and radio frequency interference (RFI).

The rubberised rear switch for single-hand operation is hermetically sealed against the

penetration of water and dust. There is also protection against short circuit,

the batteries

can be inserted regardless of their polarity.

ATEX Zone 0, certified, II 1G Ex ia IIC T4 Ga II

2D Ex ib IIIC T 105°C Db IP 68, working temperature -20 °C to +40 °C. Delivery with 4 Mignon

batteries AA/LR06

Note:

Compatible with popular headbands and PARASNAP

©

.

Order

No.

Luminosity

lm

9059

Lighting duration

h

Light range

m

Dimensions

mm

Weight

g

1000

120

59.10

50

150

167 x 39 200

(W596)

LED torch PX0

IP 68

Design:

Certified gas-, dust- and waterproof safety lamp made of highly resilient and

impact-resistant polycarbonate, non-conductive. The rubberised rear switch for single-hand

operation is hermetically sealed against the penetration of water and dust. There is also

protection against short circuit,

the batteries can be inserted regardless of their polarity.

ATEX Zone 1, certified, II 2G Ex ib IIB T4 Gb II 2D Ex ib IIIC T 105 °C Db IP 68, working

temperature -20 °C to +40 °C. Delivery with 4 Mignon batteries AA/LR06

Note:

Compatible with popular headbands and PARASNAP

©

.

Order

No.

Luminosity

lm

9056

Lighting duration

h

Light range

m

Dimensions

mm

Weight

g

0201

120

45.10

50

150

167 x 39 200

(W596)

LED torch PX1

Design:

Waterproof safety lamp made of highly resilient and impact-resistant polycarbonate

with clip, non-conductive. The rubberised rear switch for single-hand operation is hermetically

sealed against the penetration of water and dust. There is also protection against short circuit

and incorrectly inserted batteries. ATEX Zone 2, conforms to II 3G Ex nA IIC T4. Delivery with

2 Mignon batteries AA/LR06

Order

No.

Luminosity

lm

9059

Lighting duration

h

Light range

m

Dimensions

mm

Weight

g

0051

60

25.50

50

100

152 x 23

80

(W596)

LED torch PX3

ATEX torches

In potentially explosive areas appropriately

protected lamps must be used in order not

to trigger an explosion, for example, from the

spark when turning on the lamp.

Therefore the ATEX directives define the

following zones:

Zone 2:

Areas where there is

rarely and

briefly

a risk of explosion.

Zone 1:

Areas, in which there is

occasionally

a risk of explosion.

Zone 0:

Areas, in which there is a risk

of explosion

continually or

frequently and over a long

time period

.

On each torch there should be a code,

which provides information about the

application area:

II

Devices in group II may not be

used in mining.

1/2/3

Specifies the category, this

corresponds to the zone +1.

G/D

Suitable for gases/vapours (G)

or dust (D).

Ex

For use in potentially explosive areas.

ia/ib

Protection class intrinsic safety.

e

Ignition protection: increased safety.

IIx

Gas group (IIA = propane, IIB =

ethylene, IIC = acetylene/hydrogen).

IIIx

Dust group (IIIA = combustible

suspended matter, IIIB = non-

conductive dust, IIIC = conductive dust).

Tx

Temperature class, specifies

the maximum allowable surface

temperature. (T6 = 85 °C,

T5 = 100 °C, T4 = 135 °C,

T3 = 200 °C, T2 = 300 °C,

T1 = 450 °C)

IP 68

IP 68

Torches

1447