Catalog FORMAT plus 2017 - 2018

628 / 1618

3/106
ClampingSystems
3
Design: DIN 2084, spring steel strap, hardened.
Order
No.
Hole
mm
3634 Content
0201 16 75.80 35-piece
0204 22 86.30 35-piece
0207 27 95.20 35-piece
0210 32 105.50 35-piece
0213 40 132.50 35-piece
0216 16 108.00 60-piece
0219 22 132.00 60-piece
0222 27 151.50 60-piece
0225 32 185.50 60-piece
0228 40 208.00 60-piece
(W378)
Milling cutter arbour ring set, Form A
Application: For standard clamping nut.
Note: Clamping nuts are found on Ç 3/103.
Order
No.
For size 3648
0016 ER16 11.75
0025 ER25 12.10
0032 ER32 16.15
0040 ER40 22.20
(W378)
Chuck key
Design: Hardened and galvanised.
Application: For clamping nuts ER.
Order
No.
For size 3643
0016 ER16 10.45
0020 ER20 11.00
0025 ER25 12.00
0032 ER32 16.80
0040 ER40 22.10
(W342)
Collet key made of special steel
Design: Made of special steel, hardened and galvanised, drive
1/2 in. square.
Application: For clamping nuts ER. Prevent spindle damage through
controlled tightening in the machine when changing tools.
Note: Torque spanner setting value depends on the extension length S.
Torque wrench is found on Ç 6/106.
Order
No.
For size 3643 S
mm
0116 ER16 35.70 45
0125 ER25 36.70 60
0132 ER32 42.60 60
0140 ER40 47.90 60
(W342)
Collet key with adapter for torque spanner
DIN
2084
Form
A
Assortment of 35 pieces
Content – Ring width mm/piece
0.03 0.04 0.05 0.10 0.20 0.30 0.50 0.60 1.00 1.50
5 5 5 6 3 3 3 2 2 1
Assortment of 60 pieces
Content – Ring width mm/piece
0.03 0.04 0.05 0.10 0.20 0.30 0.50 0.60 1.00 1.50
10 10 10 10 5 5 4 3 2 1
Tool holders 628