903 / 1618
5/29
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
5
Design: DIN ISO 5748.
Hardened and tempered in oil.
Polished head.
High cutting force
with little effort due to the ideal set-up of the cutting angle and transmission ratio. Blades
additionally inductively hardened (64 HRC). Plastic-covered handles.
Application:
For cutting hard and soft wire. Also suitable for twisting and cutting binding
wire.
Order
No.
Length
mm
5280
5281
Cutting values
∅ soft
wire
mm
Cutting values
∅ medium-
hard wire
mm
Cutting values
∅ hard
wire
mm
Cutting values
∅ piano
wire
mm
0140
140
–
20.70
4.0
3.1
2.0
1.5
0160
160 16.05 21.60
4.5
3.5
2.2
2.0
0200
200
–
26.70
5.0
3.8
3.0
2.5
(W512)
(W525)
Power end cutter
5280
5281
5280
Made of special tool steel.
5281
Made of chromium-vanadium electric steel.
Design:
Made of vanadium electric steel, hardened and tempered in oil.
Polished head.
Particularly high cutting performance compared to other lever end cutters, with less effort
due to optimal transmission. Blades additionally inductively hardened (64 HRC). Plastic-
covered handles.
Application:
Ideally suited to wire and fencing construction, as well as for cutting bolts,
nails etc.
Order
No.
Length
mm
5287
Cutting values ∅
soft wire
mm
Cutting values ∅
medium-hard wire
mm
Cutting values
∅ hard wire
mm
Cutting values
∅ piano wire
mm
0200
200 37.70
6.0
4.0
3.5
3.0
(W525)
Bolt end-cutting pliers
Design: DIN ISO 5749.
Made of chromium-vanadium high-performance steel, forged,
hardened and tempered in oil.
Polished head.
Optimum transmission due to the double-
hinge design for
50% less force
when compared to normal power side-cutting pliers of the
same length. Welded-on and precision-milled hinge axles for high stability and zero-clearance
working. Dampening of cutting impact to protect the hand. Handles with multi-component
plastic covers.
Application:
For rough and fine cutting of all types of wire and band materials. Particularly
suited for multi cutter or especially hard cutting cases.
Order
No.
Length
mm
5291
Cutting values ∅
soft wire
mm
Cutting values ∅
medium-hard wire
mm
Cutting values
∅ hard wire
mm
Cutting values
∅ piano wire
mm
0180
180 46.80
5.5
4.6
3.2
3.0
(W525)
TwinForce
®
high-performance side-cutting pliers
Design:
Made of chromium-vanadium high-performance steel, forged, hardened and
tempered in oil. Blades additionally inductively hardened (64 HRC). With high power boost,
40% reduced effort
when compared with side-cutting pliers of the same length due to the
improved leverage ratio with the offset pivot point. Double-mounted hinge axle for heavy-
duty use over the long term. Handles with multi-component plastic covers.
Application:
Ideal for universal use in installation, maintenance and production.
Order
No.
Length
mm
5294
Cutting values ∅
soft wire
mm
Cutting values ∅
medium-hard wire
mm
Cutting values
∅ hard wire
mm
Cutting values
∅ piano wire
mm
0160
160 28.20
4.8
3.8
2.7
2.2
1160
160 33.10
4.8
3.8
2.7
2.2
2160
160 33.80
4.8
3.8
2.7
2.2
(W525)
X-Cut compact side-cutting pliers
®
5294 0160
5294 1160
5294 2160
5294
Polished head.
0160
5294
Head chrome plated.
1160
5294
Chrome-plated head.
With recessed grips and indented lettering.
Insulated
up to 1000 V according to IEC 60900, DIN EN 60900, VDE 0682/Part 201.
2160
Side-cutting pliers/end-cutting pliers
903