Midwest Tech 2016 Product Catalog

420 / 571

420 | Phone 800.831.5904 | Fax 800.285.7054
MEASURING & LAYOUT
Metalworking
Micrometer Depth Gauges
Starrett Measures depth of slots, shoulders and projec-
tions to .001". Range is 0 to 3" with 3 rods. Sleeve and
thimble have a no-glare satin chrome finish. Graduations
are quick-reading with every 1,000th numbered. The preci-
sion-ground screw has a 1" movement. A locknut holds the
setting at measurement desired. Supplied with case.
Stk. Mfr. Item Price
440Z-3RL 2-1/2"L x 1/8" dia. $296.00
445BZ-3RL 4"L x 5/32" dia. $319.00
Small Hole Gauge Set
Starrett For accurately measuring small holes,
slots, grooves and recesses. Hardened contact
surfaces have split ball, which is adjusted to size
by knurled knot at end of gauge. Final size in
1,000ths of an inch is obtained by measuring
over ball contacts with a micrometer.
Includes 4 sizes (.125" to .500") & case.
Stk. Mfr. Price
S829EZ $196.00
Contour Gauge
General Ideal for any job or hobby where
contour duplication is essential.
• Inch graduations
• Stainless steel pins
• Body is painted enamel & brass-plated
• Size: 6" x 3-1/2" (overall travel 5-1/4")
Stk. Mfr. Length Price
837 6" $11.20
Center Gauge
General Made of tempered and ground stain-
less steel with satin chrome finish. 60° angles
for U.S. standard threads and double depth of American National thread.
Notches have clearance slots.
Graduations: of 14ths, 20ths, 24ths & 32nds of an inch.
Stk. Mfr. Price
CF778 $12.30
Center Gauge C391
Starrett Spring-tempered steel. Satin chrome
finish. All gauging surfaces are ground. U.S.
Standard 60°.
Stk. Mfr. Price
C391 $28.00
Radius Gauge Set
Starrett Set features 5 different gauge surfaces on each
gauge for both convex and concave radii. Precision finished
radii with extra smooth accurate edges.
1/64" to 1/2" radius.
Includes 25 gauges & case.
Stk. Mfr. Price
S167CHZ $212.00
Check Screw Gauge
General Use to identify machine, wood and self-tapping
screws, bolts, standard rivets and common cotter pins (up
to 5/16"). 3" scale checks screw lengths. Gives drill size for
corresponding tap size and drill size for like hole. Threaded
holes indicate threads per inch while unthreaded indicate
size by number and fractions (of an inch). Made of durable
engineering plastic.
Stk. Mfr. Price
714 $12.30
Drill Point Gauge
Starrett A gauge with precision features, in-
suring correct drill point angles at 59° for better
and faster cutting. Accurately measures drill
lengths. Can also be used as a plain rule, hook rule, depth gauge, try square
and slide caliper.
Stk. Mfr. Price
22C $74.50
Tap & Drill Gauge
Starrett See at a glance the correct size tap drill for any com-
mon size machine screw tap in "NF" or "NC" thread series and
will leave the right amount of stock for approximately 65%
full thread. Also shows the correct body size drill to use and
provides 60 holes marked with the number size and decimal
equivalent of the drill that fits each hole. Thoroughly tested for
accuracy after hardening. Satin finish.
Tap size: 2 - 56 to 1/4 - 28. Drill gauge numbers 1 to 60.
Range: tap drill 50 to 3, body drill 44 to 1/4.
Tool size 5/64"T x 2-5/16"W x 6-1/4"L.
Stk. Mfr. Price
185 $82.70
Screw Pitch Gauge
Starrett Compact gauges with locking devices
for determining inside or outside threads per
inch according to V, Unified, American Na-
tional, and U.S. Standard - 60° threads.
• 11-1/2 & 27 pipe thread pitches
• TPI range 4-42
Includes 30 pitches (4 through 42-4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-
1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42).
Stk. Mfr. Price
6 $45.40
Wire & Metal Gauges
American StandardWire Gauge
Stk. Mfr. Range Price
20 0 - 36 $27.60
281 0 - 36 / .325" - .005" $85.00
US Standard Sheet Metal Gauge
Stk. Mfr. Range Price
21 0 - 36 $26.50
283 0 - 36 / .3125 - .007" $85.00