Midwest Tech 2016 Product Catalog

450 / 571

450 | Phone 800.831.5904 | Fax 800.285.7054
PLASMA CUTTERS
Welding & Foundry
Spectrum 625X Plasma Cutters
Miller Big cutting power in a small package. 40
Amps for 5/8" mild steel cutting. Easily connect
to 120V or 240V input.
• Auto-Line circuitry automatically connects to
120–240 VAC w/out making internal changes
• MVP adapters allow connection to 120 or
240V receptacles w/out tools
• X-CASE provides ultimate protection & additional space for MVP adapt-
ers, consumable box & more
• Auto postflow calculates optimum length of postflow time to optimize
consumable life & eliminate excessive air usage
• Heavy-duty work clamp w/flexible cable & quick connect
• Line voltage compensation provides peak performance for steady cuts &
cleaner ending cuts
• Auto-Refire technology controls pilot arc when cutting expanded metal
or multiple pieces of metal
• LED indicators for power, pressure, cup & temperature
• Automatic air regulation compensates for input pressure variation to pro-
vide constant recommended torch pressure
• Automatic gouging consumable detection adjusts gas pressure to opti-
mize performance
Rated Output: 40 amps @ 140 VDC, 50% duty cycle.
27 amps @ 91 VDC, 20% duty cycle.
Required Input Pressure/Flow 6 SCFM (170 L/min.) @ 90 PSI minimum, 120 PSI.
Unit size 5.5"W x 13.25"D x 9"H. Weight 21 lbs.
Includes XT40 hand-held torch w/cable, complete set of 40A consum-
ables, heavy-duty work clamp & flexible cable w/quick connect, X-CASE,
12' power cord, MVP™ adapters, 240V, 50A (6-50P) plug & 120V, 15A (5-
15P) plug, shoulder strap, consumables box w/2 electrodes, 2 tips (40A), 1
tip (30A), drag shield (30A), deflector & air fitting.
Cutter w/12' Cable
Stk. Mfr. Volts Phase Price
907-579 120/240 1 $1,784.00
Cutter w/20' Cable
Stk. Mfr. Volts Phase Price
907-579-00-1 120/240 1 $1,897.00
AirForce™ 500i Plasma Cutter
Hobart Economical unit for all conductive
metals. Portable, inverter-based design features
an adaptable power source either 115 or 230
VAC power using its Multi-Voltage Plug (MVP).
Full-cutting capacity when powered by most
engine-driven welders with 240V receptacles.
Pilot arc controller increases cutting capabilities and speeds, plus improves
tip life.
• Ergonomic torch increases comfort & more efficient cooling
• Smaller heat-affected zone, less warping •Cuts faster than oxy fuel
• LVC™ line voltage compensation • Fan-On-Demand™
• No gas pressure settings or flame tuning needed • USA made
• More precise cut, thinner kerf, less slag to clean up
• Power factor correction expands work area via extension cords, mini-
mizes nuisance trips caused by voltage drops
•Wind tunnel technology protects internal components from dust, etc.
• Postflow cooling circuit extends consumable life
• Thermal overload protection withstands tough working environments
Rated output: @ 35% duty cycle (DC):
27 amps @ 92VDC (240V).
20 amps @ 88VDC (120V).
Rated input: 15 amps @ 120V.
Plasma gas flow/pressure 3 cfm @ 90-120 psi. Cut capacity 3/8" mild steel.
Unit size 11-1/4"H x 8-1/4"W x 14-1/4"D. Weight 27.8 lbs. w/torch.
Includes HP-50 torch w/16.5' cable, 16.5' work cable w/heavy-duty work
clamp, 10' power cord w/MVP plug (115/230VAC), cable strap (secures
torch, work cable & power cord).
Stk. Mfr. Volts Phase Price
500-548 120/240 1 $1,420.00
SPOTWELDERS
Air-Cooled SpotWelders
Miller Lightweight easy-to-use unit for welding
mild, galvanized or stainless material.
• Tongs lock firmly onto material for accurate
fit-up while welding
• Adjustment for material thickness is quick & easy
• Reversible handle for left- or right-handed operation
Tongs sold separately.
SpotWelder
Stk. Mfr. Volts Capacity
Mild Steel
Rated Output @
50% Duty Cycle
Price
900-371 110 1/8" 1.5 KVA $618.00
900-377 230 3/16" 2.5 KVA $685.00
SpotWelder w/Timer Panel Includes separate control panel &
junction box for primary connections, on/off power switch, 0-5 sec. timer,
10' interconnecting power cord & 10' primary power cord.
901-345 110 1/8" 1.5 KVA $1,089.00
901-357 230 3/16" 2.5 KVA $1,225.00
90°Tongs Miller Tongs w/MT #1. 4-1/2"H throat.
Includes welding tips set.
040-218 6" $779.00
040-219 12" $905.00
040-220 18" $945.00
WeldingTip Miller Made of RWMA Class 2 alloy.
Stk. Mfr. Price
040-223 $22.40
CAN’T FIND IT?
We have access to 1,000’s of Products
not listed here.
Call us for assistance. 800-831-5904
Installation Available
for Equipment & Furniture.
Pricing Upon Request • 800-831-5904