Midwest Tech 2016 Product Catalog

492 / 571

492 | Phone 800.831.5904 | Fax 800.285.7054
PULLERS
Automotive
Seal Puller
Lisle For oil and grease seals. Insert the tip of
the tool behind the seal, press and pull. 2 tip
sizes reach in and fit nearly all seal applications.
Stk. Mfr. Length Price
56750 12-1/2" $11.60
SteeringWheel Puller
Lisle Universal steering wheel puller for most
makes and models. Screw pad protects end of
steering shaft. Heavy-duty for long wear.
Stk. Mfr. Price
45000 $23.10
Harmonic Balancer Puller
Lisle Tool helps stop damage to pulley
and shaft. Eases the operation of pulling the
balancer pulley.
Includes body, puller screw, tip assembly, 3 washers, two 3/8"-16 x 3"
bolts, three 5/16"-18 x 3" bolts & three 3/8"-24 x 3" bolts.
Stk. Mfr. Price
45500 $32.10
Harmonic Balancer Puller Set
Lisle Updated jaw design on damper puller
provides greater strength. Clevis pins allow jaws
to be quickly removed and replaced. Removes
most automotive harmonic balancers.
Includes standard harmonic balancer puller,
pulling screws & adapters (for 3300 & 3800
GM V6 engines) & updated harmonic damper pulley puller (for Chrysler, GM,
Mitsubishi & Dodge), case.
Stk. Mfr. Price
51700 $159.00
Bearing Puller
OEM For removing flywheel pilot bearings
with a slide hammer similarly threaded 5/8" x
18 or 3/4" x 16. Also useful to pull bearings and bushings on motors, gen-
erators and starters. 5-7/8" long.
Stk. Mfr. Capacity Price
27059 11/16" - 1-1/4" $21.10
Bearing Splitter
OTC Knife-like edges easily place behind the
part to secure a gripping surface, even when
clearances are extremely limited. Used with
OTC's Grip-O-Matic® puller (puller jaws grip
attachment's outer edge), or with a Push-Puller
(puller legs are threaded into the attachment's 2
tapped holes).
Stk. Mfr. Capacity Price
1122 1/8" - 2" $48.60
1123 1/2" - 4-5/8" $89.80
Power Steering &Alternator Pulley
Puller
OEM Safely removes pressed-on 1 or
2-groove pulleys from alternators and power
steering pumps. Fits most large and small pulleys in domestic and imported
cars. Features rigid drop-forged jaws, solid block body and a fine thread
screw for easy pulling.
Stk. Mfr. Price
25190 $29.20
Reversible Jaw Slide Hammer Puller
Proto Versatile tool for pulling jobs involving
gears, bearings, outer races, grease retainers, oil seals, etc. Use 2 or 3 puller
jaws for inside jobs such as bearing cups and outer races.
• 5 lb. slide hammer - removable for independent use
• 2 jaw capacity - inside 1-1/4" to 3-1/2", outside 1" to 4-1/2"
• 3 jaw capacity - 1-1/2" to 4-1/4", outside 1-1/2" to 4-1/2"
Stk. Mfr. Length Price
5049 27" $166.00
Silver Slapper 8-Way Slide Hammer
Puller Set
OTC For pulling flange-type rear axles, stub-
born oil seals and bearings, and other press-fit
parts. Jaws can be set up for 2- or 3-way inter-
nal or external pulling jobs.
Includes 5 lb. slide hammer puller, rear axle pulling attachment, 3-way
cross-head, dent puller attachment, 2-way cross-block, puller hook at-
tachment, 3 pulling jaws for internal or external pulling jobs, cone & grip
wrench adapter w/single lead (wrench sold separately).
Stk. Mfr. Price
1179 $163.00
Multipurpose Puller Set
OTC Assortment of puller tools provides a
wide range of job versatility.
• 5 lb. slide hammer puller w/2- & 3-way re-
versible heads (2 or 3 jaws for inside & outside
pulling jobs)
• Front hub puller for servicing front-wheel-drive cars (has spare locknut for
use w/No. 1177 slide hammer for rear axle flanges)
• 2-ton combination, 2- or 3-jawGrip-O-Matic® puller (3-3/8" reach, 4-3/4" spread)
• 5-ton combination 2- or 3-jaw Grip-O-Matic® puller (5-1/2" reach, 7" spread)
• Bar-type gear & pulley puller with 5-1/2"L screw & 2 hex head cap screws
(3/8"-16" x 3"L, 1-1/2" to 4-1/4" spread)
• Bearing pulling attachment (use w/No. 1027 & 7393 pullers for 1/8" to 2" spread)
Includes 5 lb. hammer puller, hub puller, 2 sizes of OTC Grip-O-Matic
jaw-type pullers, a bearing pulling attachment, cross-bar gear, pulley puller
& molded case.
Stk. Mfr. Price
1181 $439.00
Pitman Arm Pullers For Cars &Trucks
Lisle Designed to work on even the most stubborn
Pitman arm pulling jobs. Body is drop-forged and heat-
treated for strength. 4-1/4" length, 1-5/16" jaw opening.
Stk. Mfr. Price
41900 $33.10