Royne Industries LLC, dba NASCOM | P: 800.843.5530 | F: 800.727.4041 |
2
DWG No. 131122-16 Rev. 1
DIMENSIONS - IN [mm]
SWITCH
MAGNET
COVER
37.85
1.490
9.40
.370
1.27
R.050TYP.
0.25
.010
3M468ADHESIVEBACK
TOP
SIDE
37.85
1.490 TYP.
9.53
.375 TYP.
6.99
.275 TYP.
8.26
.325 TYP.
3M VHB TAPE
FRONT
TOP
6.10
.240
3M VHB TAPE
TOP
FRONT
INSTALLATION INSTRUCTIONS
•
Pre-fit the switch and magnet in the desired location on the window.
•
Clean the mounting surface area for both switch and magnet with alcohol and let dry.
•
Remove the liner from the tape on the back of the switch and carefully position the switch on the window frame as close
as possible to the movable part of the window.
•
Remove the liner from the tape on the back of the magnet and carefully align the magnet parallel with the switch on the
movable part of the window.
•
Apply firm pressure to the switch and magnet housing to ensure proper adhesion to the mounting surface.
•
Test alarm system for correct operation.
NC1012T
MINI SCREW TERMINAL SWITCH AND MAGNET SET
