2017 Product Catalog

240 / 274

Security &Maintenance
240 phone: 1-800-328-8908 | fax: 1-800-369-9207 | 2017 | R15
Fall Management
101-114
Nurse Call
4-82
Security & Maintenance
232-261
Carts & Storage
223-231
Clinical Care
201-222
Assistive Devices
185-200
Beds & Room Supply
149-184
Mobility & Transfer
115-148
TVs & Accessories
83-100
*Shipped direct from the factory to you.
Repairs & Services
262-264
| Smoke, Heat & CO Detectors
Combined Smoke/Heat Detector
This photoelectric smoke detector with heat
sensor is available in a 2-wire or 4-wire unit. Easy to
install, with a plug-in design, the large wire entry
port and in-line terminals provide ample room
for neatly routing wiring inside the base. Base
accommodates a variety of back box mounting
methods as well as direct mounting with drywall
anchors.
• Built-in remote maintenance signaling
• Drift compensation & smoothing
algorithms
• Simplified sensitivity measurement
• Wide-angle, dual-color LED indication
• Loop testing via EZWalk feature
Part No. Description Price
Kidde Economy Smoke Detector
Battery powered ionization unit offers the
maximum protection in a compact design.
Twist-off mounting bracket for quick installation
and battery replacement. Includes one 9 V
battery, mounting screws, test button, low battery
indicator chirp and flashing red light to indicate
power.
• Loud 85 dB horn for safety
• Ionization chamber responds fast to low-
smoke flaming fires
Part No. Description Price
First Alert® Carbon Monoxide Alarm
The CO Alarm features a digital display that
lights up for easy readings. Electrochemical CO
sensing allows greater temperature and humidity
variations for accurate detection. Peak Level
Memory stores and displays the highest CO
level detected. Detector will alarm at 70, 150 and
400 PPM, and can be tested using the front test
button or remotely using most standard IR remote
controls. The unit plugs directly into a standard
non-switched outlet, or use the 7' line cord for
multiple placement options. Two AA batteries
(included) provide battery backup and can be
changed without unplugging the monitor.
• Low battery warning
• Operates at 120 VAC, 60 Hz
• Alarms at 85 dB from 10'
Part No. Description Price
Heat Detector
Heat Detector connects easily to most commercial
fire alarm systems. For use in areas where property
protection is required such as boiler rooms, kitchens,
medicine or linen storage areas. Rate-of-rise models
respond to a temperature increase of 15° F/minute,
sensing flash fires even before the 135° or 194° fixed
temperature is reached.
• Rate-of-rise feature is automatically
self-restoring
• Not for use where life safety is a factor
Part No. Description Price
Photoelectric Smoke Detector for the
Hearing Impaired
The Gentex Smoke Detector is a 120 VAC
photoelectric single station smoke detector
designed to provide reliable early warning of
smoke where both audible and visual alarms
are required. Operates on the “light scatter”
principle, utilizing a pulsing LED light source
and a photodiode sensor in a fully screened
sensing chamber. Smoke entering the chamber
deflects the infrared beam and triggers the alarm.
During the alarm period, the strobe will flash at a
brightness of 177 candela, 60 times per minute.
• 9 VDC battery backup with audible
low battery chirp
• 5 to 1 signal-to-noise ratio
• Nominal 21⁄
2% sensitivity
• Convenient test switch
• 90 dBA piezo signal
Part No. Description Price
year
warranty
7 115257
Self-Diagnostic Photoelectric
Smoke Detector
This unit features a replaceable optical chamber,
diagnostic LED, sounder, heat detector, built-in
power supervision relay and a design to reduce
nuisance alarms caused by dust, RF interference
and ambient light. Mounts on single-gang box, 3"
round or 4" octagonal boxes. 4-wire, 12 or 24 V.
Part No. Description Price
year
warranty
3
year
limited
warranty
5
year
warranty
1