DE
26
ANDERSON
™
HUBBELL
®
POWER SYSTEMS
FARGO
®
December 2014
DOUBLE SIDE TIE
FORMED WIRE
INSULATOR TIE “C-NECK” & “F-NECK”
Double Side Ties are used on double arm construction in applications where the conductor is aligned to sit in the side groove of
interchangeable headstyle insulators. This type of tie is typically for use in applications where the line angles are larger than double
support ties. This series is for use on vertically mounted insulators (at double insulator locations) with line angles between (0°) zero
degrees and (80°) eighty degrees with no more than a (40°) forty degree angle at each insulator.
Fargo LLDU series formed wire double support ties are designed for use with ACSR, AAC, AAAC, Compacted ACSR & AWAC
®
.
C-Neck (2-1/4” neck diameter)
& F-Neck (2-7/8” neck diameter)
interchangeable headstyle
ALUMINUM / STEEL
LLDU4xxx
NOTES:
All dimensions: inches (mm) unless otherwise noted.
AWAC is a registered trademark of Copperweld Co.
LLDU4xxx
CATALOG
NUMBER
NOMINAL CONDUCTOR SIZE DIAMETER RANGE
PACKAGING PER
BOX
APPROX.
APPLIED
LENGTH
INSULATOR
IDENT.
MARK
CONDUCT.
COLOR
CODE
ACSR AAC AAAC MIN MAX UNITS
WT LBS
(KG)
9/16” Minimum Groove Radius
LLDU4152AS
#4 (6/1)
#4 (7/1)
#3 (7W)
#4 (7W)
0.245
(6.23)
0.277
(7.05)
50
21
(9.5)
16
(406)
“C”-BLACK &
“F”-YELLOW
ORANGE
LLDU4153AS
#2 (7W)
#3 (7W)
0.278
(7.06)
0315
(8.00)
50
21
(9.5)
16
(406)
“C”-BLACK &
“F”-YELLOW
PURPLE
LLDU4154AS
#2 (6/1)
#2 (7/1)
#1 (6/1)
#1 (7W)
#1 (19W)
#2 (7W)
0.316
(8.03)
0.357
(9.08)
50
21
(9.5)
16
(406)
“C”-BLACK &
“F”-YELLOW
RED
LLDU4155AS 1/0 (6/1)
1/0 (7W)
1/0 (19W)
1/0 (7W)
0.358
(9.09)
0.405
(10.30)
50
21
(9.5)
17
(432)
“C”-BLACK &
“F”-YELLOW
YELLOW
LLDU4156AS 2/0 (6/1)
2/0 (7W)
2/0 (19W)
2/0 (7W)
0.406
(10.31)
0.459
(11.66)
50
21
(9.5)
18
(457)
“C”-BLACK &
“F”-YELLOW
BLUE
LLDU4157AS 3/0 (6/1)
3/0 (7W)
3/0 (19W)
3/0 (7W)
0.460
(11.68)
0.520
(13.21)
50
36
(16.4)
19
(483)
“C”-BLACK &
“F”-YELLOW
ORANGE
LLDU4158AS 4/0 (6/1)
4/0 (7W)
4/0 (19W)
266.8 (7W)
4/0 (7W)
0.521
(13.23)
0.588
(14.95)
50
36
(16.4)
19
(483)
“C”-BLACK &
“F”-YELLOW
RED
insulators.
Recommended for use with ANSI
Class 55-2 Pin, 55-3 Pin, 55-4 Pin,
55-5 Pin, 57-1 Post, 57-2 Post, &
57-3 Post Insulators.
Note:
Consult factory for information
on other applications.
Right hand lay standard.