2016 Product Catalog

165 / 570

165
Phone 800.831.5904 | Fax 800.285.7054 |
HandTools, BuildingTrades &Vo-Ag
WOOD CHISELS
AUGER BITS & SETS
Hand Brace Solid Center Auger Bits
Irwin Has double spurs and cutters plus bal-
anced head with medium-fast screw pitch. Open throat design gives quick
clearance of chips to prevent clogging and binding. Made from special-grade
tool steel with highly polished finish, heat-treated and tempered for long
life. Taper square shank.
Stk. Mfr. Size Length Price
43604 1/4" 7-1/2" $14.30
43606 3/8" 8" $14.30
43607 7/16" 8" $14.30
43608 1/2" 8" $14.30
43609 9/16" 8-1/2" $14.60
43610 5/8" 8-1/2" $15.00
43612 3/4" 9" $16.00
43614 7/8" 9" $17.50
43615 15/16" 9-1/2" $18.30
43616 1" 9-1/2" $18.90
13-Piece Set Bits from 1/4" to 1" by 16ths in vinyl roll w/hang grommets.
Stk. Mfr. Size Length Price
43697 $198.00
Solid Center Auger Bits
Irwin For use in electric drills and hand braces.
Heat-treated full length for added strength.
Coarse screw point for fast boring in all types
of wood.
Stk. Mfr. Size Shank Length Price
49904 1/4" 3/8" 7-1/2" $14.40
49906 3/8" 3/8" 7-1/2" $14.50
49908 1/2" 3/8" 7-1/2" $14.60
49910 5/8" 3/8" 7-1/2" $14.60
49912 3/4" 3/8" 7-1/2" $15.70
49914 7/8" 3/8" 7-1/2" $17.10
49916 1" 3/8" 7-1/2" $18.50
6-Piece Set Includes 1/4", 3/8", 1/2", 5/8", 3/4" & 1", plus vinyl holder.
Stk. Mfr. Size Shank Length Price
49998 $88.40
13-Piece Set Includes 1/4" to 1" by 16ths, plus holder.
Stk. Mfr. Size Shank Length Price
90076 $196.00
Bell Hanger Bit
Vermont American Heat-treated and tem-
pered for long life. Wide flute design allows
for fast, clean boring in wood and plaster. Hole
in flute head for pulling wires. Used for drilling
lamp columns for cord or pipe nipple to hold
socket.
Stk. Mfr. Size Length Price
13323 3/8" 18" $14.20
Expansive Bit
Irwin Drill 35 different diameter holes with
one adjustable cutting blade. Strong, 1-piece
forged bit has lockhead screw to secure desired boring size.
2 cutters from 7/8" to 3" (35 hole sizes in 1/8" increments).
Stk. Mfr. Length Price
44202 8-1/2" $41.60
WOOD CHISELS
5-Piece CarvingTool Set
General Half-round palm style handles are made
of hardwood. Blades are hand-forged tool steel.
Includes honing stone & plastic case, plus: 5/16"
bent large gouge, 5/16" straight skew chisel, 5/32"
straight small gouge, 5/16" bent square chisel &
5/32" bent V-parting tool.
Stk. Mfr. Blade Handle Price
1293 2-1/2"L 2-1/4"L $56.50
Basic CarvingTool Set
Buck Carving tools are forged from quality tool steel
with hand-ground surfaces and sharpened edges.
Sturdy plastic handles are designed to fit comfortably
in the hand.
Includes 1/2" straight gouge, 1/2" firmer chisel, 1/4"
straight gouge, 1/4" corner chisel, 1/4" front bent chisel
& 1/4" V-parting tool.
Stk. Mfr. Blade Handle Price
306 3"L 3"L $33.40
6-Piece CarvingTool Set
X-Acto Heavy-duty carving tools made of forged
steel with hardwood handles. Features all of the tools
needed for three dimensional carving, deep relief
cutting, groove cutting and initial shaping of wood, li-
noleum and other tough materials. Designed to allow
you to make the careful and detailed cuts you need
time and time again.
Includes straight chisel, bent chisel, skew bevel chisel, bent gouge, u-tool &
veining tool.
Stk. Mfr. Price
X5179 $36.40
12-Piece CarvingTool Set
Steelex Set features beech wood handles
with steel ferrules.
Includes leather roll-up pouch, plus 6 mm
(straight, spoon, beading, right skew, V-groove,
round nose & double skew), 8 mm gouge, 10
mm V-tool & gouge, 12 mm straight & 14 mm gouge.
Stk. Mfr. Blade Handle Price
D2227 3/14"L 3-5/8"L $58.80
SuperproWood Chisels
Great Neck Blade barrel and shank are
forged from 1 piece of high carbon tool steel. 2
zone heat treatment and temper. 3" blade length with beveled edges. Steel
cap to absorb hammer blows. Plastic handles. USA made.
Stk. Mfr. Width Price
1041 1/4" $11.60
1042 3/8" $11.60
1043 1/2" $12.60
1044 5/8" $12.80
1045 3/4" $12.80
1046 1" $13.30
1047 1-1/4" $14.50
1048 1-1/2" $16.00
1049 2" $17.50