2016 Product Catalog

336 / 570

336 | Phone 800.831.5904 | Fax 800.285.7054
DRILL PRESSES
Woodworking Machinery
22" Drill Press
General Intl. Industrial 12-speed motor features spin-
dle speeds of 120 to 2,270 rpm. Spindle is supported by
high-quality ball bearings, and cast iron pulleys reduce vibra-
tion.
• Rotating, 45° tilting, crank-operated worktable w/quick-re-
lease clamp
• Large, front-mounted safety switch w/lock-out
• Adjustable spindle tension-return spring
• Built-in lamp illuminates the drilling area
• Heavy-duty positive depth stop for quick adjustment
Drilling capacity 1-1/4" dia. Chuck size 3/4". Taper MT-4.
Column 3-5/8" dia. Spindle travel 4-1/2". 12 spindle speeds 120-2,270 rpm.
Table work surface 18-1/2" x 16-1/8", tilt 45° R&L.
Tool size 19-1/2" x 22-1/2" at base, 68-3/4"H. Tool weight 372 lbs.
Includes chuck & key, worklight (bulb not included), depth stop & manual.
Please specify voltage. 110V will be shipped if not specified.
Stk. Mfr. Volts HP Phase Price
75-500M1 110/220 1 1 $1,465.00
Forstner Bits
Steelex Forstner bits make extremely smooth
and clean flat-bottom holes in all kinds of
wood. Cuts through any grain pattern, even
knots. For use with drill presses.
Stk. Mfr. Size Shank Price
D1001 1/4" 3/8" $4.05
D1002 3/8" 3/8" $4.19
D1003 1/2" 3/8" $5.13
D1004 5/8" 3/8" $5.94
D1005 3/4" 3/8" $6.65
D1006 7/8" 3/8" $7.16
Saw-Toothed
Stk. Mfr. Size Shank Price
D1007 1" 3/8" $7.56
D1008 1-1/8" 3/8" $8.51
D1009 1-1/4" 3/8" $9.72
D1010 1-3/8" 3/8" $11.30
D1011 1-1/2" 3/8" $12.10
D1015 2" 3/8" $17.10
D1020 2-1/2" 1/2" $31.70
D1024 3" 1/2" $41.80
25-Piece Sanding Drum Kit
Includes case plus
•2" & 1-1/2" dia. x 1-1/2" & 1", plus 3/4" dia. x 1"
sanding drums with 1/4" shank
•1/2" dia. x 1/2" sanding drum with 1/8" shank
• 2 each 80 grit medium & 120 grit fine aluminum oxide sleeves to fit
drums
Stk. Mfr. Price
17-940 $39.60
Mortising Attachment Kit
Improve accuracy when cutting square holes
for various sized mortise & tenon joints. Kit connects to drill
in minutes w/out tools. Easy-use hold-down provides better
clamping for exacting cuts. Special alignment gauge for fast,
accurate set-up, prolonged tool life. Large, cast iron fence
assembly supports thick or tall workpiece. 4" capacity under
hold-down, 2-3/4" capacity ends of clamp rods to fence.
Fits drill press w/quill dia. of 66 mm, 50.8 mm, 48 mm & 38 mm (Delta drill
press models 11-980, 11-990, 14-070 & 17-900; radial drill press model 11-
090 & Sears drill press models 21313, 21315 & 21317).
Includes mortising attachment, 4 mortising chisels (1/4" x 1/4", 5/16" x
5/16", 3/8" x 3/8", 1/2" x 1/2"), 4 bits & case.
Stk. Mfr. Price
17-924 $156.00
Mortising Chisel & Bit Set
Production-type steel chisels. Each unit provides 1 mortising
chisel & its coordinating bit.
Stk. Mfr. Size Shank Price
17-001 1/4" 5/8" dia. $24.00
17-002 5/16" 5/8" dia. $24.00
17-003 3/8" 5/8" dia. $24.00
17-004 1/2" 5/8" dia. $24.00
4-Piece Set Includes 1/4", 5/16", 3/8" & 1/2".
17-005 $102.00
Drill Press Guard
Biesemeyer drill press safety
shield mounts to any drill press w/a column
diameter from 1-1/2" to 3-11/16".
Stk. Mfr. Price
17-985 $50.00
Drill Press Chuck Guards
General Intl. Designed to meet the most stringent safety
requirements. Sturdy cast aluminum body & impact resis-
tant windows. Spring loaded flip-up design allows for quick
drill bit changes without interference.
Stk. Mfr. Size Fits Price
70-152 52mm 34-01, 34-02, 34-10, 34-111,
34-121
$189.00
70-155 55mm 75-025, 75-030, 75-125, 75-150,
75-160, 75-550
$189.00
70-165 65mm 75-100, 75-200 $189.00
70-175 75mm 75-260, 75-500, 75-700 $189.00
Drill PressVise Clamps
Steelex Adjusts quickly & easily to lock work-
piece in any position. Clamping pad pivots to
conform to any workpiece, ensuring uniform
pressure.
Stk. Mfr. Jaw Capacity Length Price
D2192 3" x 3" 10" $20.90
D2493 4" x 5" 12" $24.20 Please visit
for the complete specifications
of the products listed on this page.