2016 Product Catalog

449 / 570

449
Phone 800.831.5904 | Fax 800.285.7054 |
Welding & Foundry
PLASMA CUTTERS
MULTIPROCESSWELDERS
XMT® 304 CC/CV MultiprocessWelder
Miller The multiprocess XMT 304 CC/CV com-
bines the advantages of inverter-based power
with the built-in features and productivity of high-
end MIG machines.
• Wind Tunnel Technology™ protects electrical
components & PC boards from contamination
• Fan-On-Demand™ cooling system operates
only when needed, reducing noise, energy use
& the amount of contaminants pulled through
machine
• Lift-Arc™ allows TIG starting w/out the use of high-frequency & starts
the arc without contaminating the weld w/tungsten
• Line voltage compensation keeps welding output constant even if input
power varies by +/-10 percent
• Adaptive Hot Start™ increases the output amperage at the start of a
weld if necessary, eliminating electrode sticking
• Lightweight, aerospace-grade aluminum case offers protection w/the ben-
efit of reduced weight
• Inverter arc control technology provides greater puddle control for supe-
rior 6010 Stick electrode performance
• Large, dual digital meters are easy to view & are presettable to ease set-
ting weld output
• Process selector switch reduces the number of control setup combina-
tions w/out reducing any features
• Auto-Link® circuit automatically links the power source to primary volt-
age being applied (230/460 or 460/575 VAC, single- or three-phase)
Output Power 10 – 35V, 5 – 400 A
Rated Output: 300 A @ 32 VDC, 60% Duty Cycle, 3-Phase
225 A @ 29 VDC, 60% Duty Cycle, 1-Phase
Welding Amperage Range: 5 - 400 A, in CC mode,
10 - 35 V, in CV mode
Unit size 17"H x 12.5"W x 24"D. Weight 79.5 lb.
Stk. Mfr. Volts Phase Price
903-471 208-230/460 1 or 3 $3,581.00
Welder w/MIG Runner Package Includes XMT 304 CC/CV power
source, 22A wire feeder, Bernard® Q400 MIG gun, .035/.045-inch drive
roll kit, regulator/flow gauge with gas hose, MIGRunner cart with cylinder
rack bottom tray will hold optional Coolmate 3 (sold separately).
951-343 208-230/460 1 or 3 $5,745.00
PLASMA CUTTERS
20 Plasma Cutter
Lincoln Lightweight, portable unit cuts sheet
metal. Ideal inverter for Vo-Ag, HVAC, auto
body, sheet metal fabrication and cutting ex-
panded metal, stainless steel and aluminum.
• No high-frequency to damage sensitive elec-
tronic equipment
• Top-mounted, easy-adjust air pressure regulator
• Uses standard compressed air • Fan-cooled
• 1-yr. mfr.’s warranty (parts & labor), 90 day (plasma torch)
Rated output: 20 amps @ 40%: 10-15 amps @ 50%.
Rated input: 20 amps @ max. output, 15 amps @ 10-15 amps output.
Plasma gas flow/pressure 3.5 cfm @ 65 psi.
Cutting capacity 3/8" steel. Unit size 12.5"H x 6.5"W x 16"D. Weight 21 lbs.
Includes cutting torch assembly w/9.5' reach, ground clamp w/8' cable,
saddle-hook cable storage, power cord & plug.
Stk. Mfr. Volts Phase Price
K2820-1 115 1 $1,206.00
Spectrum® 375 X-TREME™
Plasma Cutter
Miller 30 Amps for 3/8" mild steel capacity,
XT30 torch with ergonomic handle and flexible
cable, Auto-Line™ and MVP™ plugs make this
19 lb. unit the most portable plasma cutting
system on the market.
• Auto-Line™ circuitry automatically connects to 120–240 VAC, 1-phase
power, 50/60 Hz, w/out removing the covers to relink power source
• X-CASE™ protects during transport & storage
• Auto-Refire™ technology automatically controls pilot arc when cutting
expanded metal or multiple pieces of metal
• XT30 torch w/ergonomic handle to help prevent operator fatigue
• Power w/any Miller engine w/generator or equivalent equipment
• LED indicators for pressure, power, cup & temperature allow faster trou-
bleshooting, eliminating unnecessary downtime
• LVC™ line voltage compensation provides peak performance power
under variable conditions
Rated output: (DC): 20 amps @ 35% duty cycle.
Rated input: @ rated output: 20 amps @ 120V. 30 amps @ 240V.
Plasma gas flow/pressure 5.0 cfm @ 90 psi. Cut cap’y. 3/8" steel, 1/4" alum.
Unit size 9"H x 5-1/2"W x 13-1/4"D. Weight 19 lbs. w/torch.
Includes XT30 torch w/12' cable, heavy-duty work clamp w/12' cable,
XCASE, 10' power cord, MVP plugs 5-15P (120V, 15 A), 6-50P (240V, 50
A), shoulder strap, 2 electrodes, 2 tips, deflector & air fitting.
Stk. Mfr. Volts Phase Price
907-529 120/240 1 $1,348.00
Electrodes Miller Replacement 25/27A Electrodes. 5/pkg.
176-655 $43.60
Non-ShieldedTips Miller Replacement 25/27A Tips. 5/pkg.
176-656 $22.40
Shield Cup Miller Replacement Shield Cup. 5/pkg.
202-808 $22.20
Not sure what tool
is right for your
project or program?
Dan Goodwin ext. 3104
We’re experts when it comes to
setting up your classroom, shop & lab.
Call us at 800-831-5904.