2016 Product Catalog

493 / 570

493
Phone 800.831.5904 | Fax 800.285.7054 |
Automotive
CVTOOLS
Gear Puller
Zim Takes dia. up to 6". Equipped with 1 pair of 3"
arms. Crossbeam made of malleable iron. Jaws are
made of drop-forged steel. For timing gears, pump
shaft and magneto gears, generator and starter
repairs.
Stk. Mfr. Price
601 $35.00
5-Ton, 2 Jaw Grip-O-Matic Parts Puller
OTC Mechanical puller removes and installs parts for
fast, effective repairs. Forged from quality steel and
heat treated. Reversible jaws. Exceeds rated capacity
testing.
Stk. Mfr. Max. Reach Spread Capacity Price
1024 3-1/4" 6" $48.60
Gear Pullers
Proto Toggle
type pullers
incorporate
an automatic
grip tightening
feature. They provide the means and power to pull gears, flywheels, pulleys
and other parts where it is necessary to apply the arms between spokes
and where no other puller can be applied. Pullers adjust and reverse using
3 parts: link with locking pin; link with 2 grooved pins and the jaw. Pullers
have fewer parts, including pins which are pressed into the link. Forcing
screws are forged from alloy steel and heat-treated.
2 Jaw Puller
Stk. Mfr. Spread Reach Capacity Price
4033 4" 3-1/2" 2 Ton $54.90
3 Jaw Puller
4038 11" 9" 7 Ton $176.00
3 Jaw Reversible Puller
4046 7" 5-1/2" 5 Ton $107.00
4047 10" 5-1/2" 7 Ton $170.00
Pitman ArmWedge
OEM Easily removes Pitman arms. Insert wedge
between the parts to be separated and hammer
the end, breaking the parts free. Forged and heat-
treated.
Stk. Mfr. Opening Price
27021 1-1/8" $16.20
Ball Joint Separator
OEM Separates stubborn ball joints from the
steering knuckle. Insert tool between parts to be
separated and hammer the end to break parts
free. Makes replacement and disassembly of
front suspensions and steering components easy.
Forged, heat-treated wedged ends.
Stk. Mfr. Opening Price
25202 15/16" $12.30
Tie Rod End Puller
OEM Separates tie rod ends from the steering
knuckles, idler arms and Pitman arms. Prevents damage to steering compo-
nents. Heavy-duty alloy steel. Tapered fork wedge ends. 11-7/8"L.
Stk. Mfr. Opening Price
25201 21/32" $14.90
SUSPENSION
InnerTie RodTool
Lisle Inner tie rod end sockets with a com-
plete hex on the full length of the socket. The
rounded socket ends prevent access to the
wrench flats. Tool utilizes 6 crows feet (1-7/16",
1-3/16", 1-1/4", 1-5/16", 1-1/2", 33.6 mm) to
engage wrench flats. Long socket slips over tie
rod end and connects to the crows foot. Inner tie rod can be removed and
installed without removing the rack.
Stk. Mfr. Price
45750 $102.00
Universal InnerTie RodTool
Mayhew Used to remove & mount inner tie
rods on vehicles. Fits 35-45mm tie rods with no
additional interchangeable adapters. For use on round, hexagonal & octag-
onal tie rods. Extended shaft and narrow profile allows for use in hard-to-
reach and confined spaces.
Stk. Mfr. Length Price
29910 16-1/2" $156.00
Suspension StrutTool
Lisle Heavy duty clamps and bolts safely and
securely hold spring during operation. Fits all
strut spring sizes, import and domestic.
Stk. Mfr. Price
62300 $79.20
4-WD & FWDTOOLS
4-WD Bearing LocknutTools
Lisle 1/2" drive. Not for use with impact wrenches.
For 4- & 6-Slot Applications Ford (3/4 ton) 1978 to present GM
(3/4 & 1 ton) 1973-1981.
Stk. Mfr. Price
27400 $32.10
For 4-Slot Applications Chevrolet, GMC (1/2 ton) 1960 to present,
Blazer, Scout, Bronco 1966 to present, Ford F-100 & F-250 1959 to
present, Dodge, International (1/2 ton) 1969 to present.
Stk. Mfr. Price
27250 $23.60
CVTOOLS
CV Joint BandingTool
Lisle For all CV joints using Band-It® and
Band-It Jr.® type boot bands. Use 5/8" socket
or wrench to wind and crimp new band on
boot. Tool is easily disengaged from the band after tightening.
Stk. Mfr. Price
30950 $12.60